{"title":"Material Handling","description":"\u003cp\u003eMaterial Handling Description\u003c\/p\u003e","products":[{"product_id":"1-1-2-ast-1","title":"LIFTING SHACKLE FOR LIFTING CLAMP 1-1\/2","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Lifting Shackle for Lifting Clamp is a genuine OEM replacement shackle designed for use with Renfroe lifting clamps as the primary connection point between the clamp and the overhead rigging assembly. This shackle is engineered to the dimensional and load requirements of the Renfroe lifting clamp series for which it is specified, ensuring correct fit at the clamp bail or connection point and proper load alignment through the rigging system. As a primary load path component, the shackle transfers the full working load from the clamp to the hoist, hook, sling, or chain above it, and its structural integrity is fundamental to the safety of every lift in which it is used.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eLifting shackles used in regular industrial service are subject to tensile stress, wear at the pin and bow contact surfaces, and cumulative fatigue from repeated loading and unloading cycles. In demanding environments such as steel mills, fabrication shops, and plate processing facilities, this wear can progress more rapidly, making consistent pre-use inspection an essential part of safe rigging practice. Elongation of the bow, wear at the hook or rigging contact point, thread damage on the pin, surface cracking, or any visible deformation are all conditions that require the shackle to be immediately removed from service and replaced with a genuine Renfroe OEM part before the clamp is used again.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe lifting shackles are manufactured to the original dimensional and material specifications of the clamp series for which they are designed, ensuring correct fit, full load compatibility, and reliable performance throughout the service life of the component. This shackle is intended for use by qualified rigging and maintenance personnel and should always be selected based on the working load limit of the clamp and the requirements of the specific lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct shackle selection) Standard overhead rigging hardware including hooks, slings, chains, and hoist assemblies\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Primary load transfer connection between Renfroe lifting clamps and overhead rigging hardware Steel mill, fabrication shop, and heavy industrial plate lifting applications Replacement shackle for scheduled clamp maintenance and inspection programs Restoration of clamp-to-rigging connection to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement shackle for lifting clamp series Engineered to correct dimensional and load requirements for specified clamp model Primary load-bearing connection subject to tensile stress and wear requiring regular inspection Manufactured to original dimensional and material specifications Compatible with standard overhead rigging hardware within the rated working load limit\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the shackle body, pin, and threads before every use. Remove from service immediately if wear, elongation, cracking, thread damage, or deformation is detected. Never exceed the rated working load limit. Ensure the pin is fully threaded and secured before lifting. Confirm the specific Renfroe clamp model and working load limit before ordering to ensure the correct shackle is selected.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099504005361,"sku":"1-1-2-ast-1","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-1-2-ast-rk","title":"REBUILD KIT FOR 1-1\/2 TON AST PLATE CLAM","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Rebuild Kit is a genuine OEM kit containing the replacement components necessary to fully rebuild and restore a Renfroe lifting clamp to its original operating specification and rated working load limit performance. By providing all critical wear parts as a matched set, the rebuild kit simplifies the overhaul process and ensures that every component replaced during the rebuild meets the original dimensional, material, and hardness specifications required for safe operation at the clamp's rated capacity. Using a genuine Renfroe OEM rebuild kit eliminates the risk of introducing non-OEM components that may not meet the exacting requirements of a rated industrial lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eLifting clamps used in regular industrial service accumulate wear across multiple components simultaneously, including the cam, gripping cam, cam pin, bottom roller, spring, and related hardware. In high-production environments such as steel mills, fabrication shops, and plate processing facilities, this wear can progress more rapidly, making scheduled full rebuilds an important part of a comprehensive clamp maintenance program. Performing a complete rebuild at the appropriate interval addresses wear across all critical components at once, restoring the clamp mechanism to its original operating condition and extending the service life of the clamp body before individual component failures can occur.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThis kit is intended for use by qualified maintenance personnel familiar with Renfroe lifting clamp disassembly, inspection, and reassembly procedures. Genuine Renfroe OEM rebuild kit components are manufactured to the original specifications, ensuring correct fit and full compatibility with the existing clamp body and surrounding hardware. The fully rebuilt clamp must be inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel components\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct rebuild kit selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Full rebuild and restoration of Renfroe lifting clamps Scheduled clamp overhaul and heavy maintenance programs Replacement of all critical wear components as a matched OEM set Extension of clamp service life while restoring rated working load limit performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM rebuild kit Contains matched set of critical wear components for complete clamp rebuild Ensures all replaced parts meet original dimensional, material, and hardness specifications Addresses wear across all critical components simultaneously during scheduled overhaul Simplifies the rebuild process and eliminates the risk of non-OEM component substitution\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Confirm the specific Renfroe clamp model, series, and working load limit before ordering to ensure the correct rebuild kit is selected. Rebuild must be performed by a qualified person familiar with Renfroe clamp maintenance procedures. Conduct a full clamp inspection and function test before returning the rebuilt clamp to service.\u003c\/span\u003e\u003cspan class=\"_Container_wxr42_1 _loadingIndicator_1iy4o_52 _ContainerInline_wxr42_15 _ContainerHidden_wxr42_19 _ContainerPaused_wxr42_10\" role=\"status\"\u003e\u003cspan class=\"_Dots_wxr42_10\"\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099504038129,"sku":"1-1-2-ast-rk","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-1-2-hr-11","title":"GRIPPING CAM FOR HORIZONTAL CLAMP 1-1\/2","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Gripping Cam is a genuine OEM replacement component and the primary load-engaging element within the Renfroe lifting clamp mechanism. The gripping cam is the surface that makes direct contact with the workpiece, biting into the material as the clamp is loaded and generating the clamping force that secures the plate or structural member during lifting. The geometry, surface hardness, and condition of the gripping cam are directly responsible for the quality and reliability of the grip, making it one of the most functionally critical wear components in the entire clamp assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eIn active industrial use, the gripping cam surface is subject to abrasive wear from repeated contact with mill scale, rough plate surfaces, and varying material conditions. Over time, the cam teeth or gripping surface can become worn smooth, chipped, or deformed, reducing the cam's ability to bite into the workpiece and maintain secure clamping force under load. A worn gripping cam represents a direct safety risk, as reduced grip can lead to slippage or load drop during lifting. For this reason, the gripping cam must be inspected at every scheduled maintenance interval and replaced with a genuine Renfroe OEM part as soon as any degradation of the gripping surface is identified.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe gripping cams are manufactured to the original surface hardness, tooth geometry, and dimensional specifications, ensuring that the replacement cam engages the workpiece with the same reliability and holding power as the original equipment. This part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe lifting clamps, and the clamp must be fully inspected and function tested before being returned to service after gripping cam replacement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Hardened alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct gripping cam selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement gripping cam for Renfroe lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of workpiece engagement and clamping force to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement part Primary workpiece contact and load-engaging component within the clamp mechanism Hardened gripping surface designed to bite into plate and structural material under load Worn or damaged gripping cam is a direct safety risk requiring immediate replacement Manufactured to original surface hardness, tooth geometry, and dimensional specifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the gripping cam surface at every scheduled maintenance interval and before each use. Replace immediately if the gripping surface shows wear, smoothing, chipping, or deformation. Confirm the specific Renfroe clamp model and working load limit before ordering. Installation must be performed by a qualified person. Conduct a full clamp inspection and function test before returning to service.\u003c\/span\u003e\u003cspan class=\"_Container_wxr42_1 _loadingIndicator_1iy4o_52 _ContainerInline_wxr42_15 _ContainerHidden_wxr42_19 _ContainerPaused_wxr42_10\" role=\"status\"\u003e\u003cspan class=\"_Dots_wxr42_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099504103665,"sku":"1-1-2-hr-11","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-1-2-astl-4","title":"SWIVEL JAW FOR ASTL 1-1\/2T","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Swivel Jaw is a genuine OEM replacement component designed for use with Renfroe lifting clamps that incorporate a swivel jaw configuration. The swivel jaw provides the gripping interface between the clamp and the workpiece while incorporating a swivel function that allows the jaw to rotate and self-align to the plate surface as clamping force is applied, accommodating minor variations in plate angle, surface irregularity, or rigging geometry without compromising the integrity of the grip. This self-aligning capability ensures consistent jaw contact and reliable clamping force distribution across the gripping surface, contributing to secure and dependable plate retention throughout every lift cycle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eAs a component that contacts the workpiece directly with every lift cycle, the swivel jaw is subject to wear at the gripping surface and teeth, fatigue at the swivel mechanism, and impact damage from the demands of regular industrial use in fabrication shops, steel service centers, steel mills, and plate processing facilities. Wear of the gripping teeth or surface reduces the jaw's ability to grip the plate securely under load, while wear or damage at the swivel mechanism can affect the jaw's ability to self-align correctly, either of which requires immediate replacement with a genuine Renfroe OEM swivel jaw to restore the clamp's gripping performance and self-alignment function to its original specification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe swivel jaws are manufactured to the original dimensional, material, and hardness specifications of the clamp series for which they are designed, ensuring correct fit within the clamp body and reliable gripping and swivel performance at the clamp's rated capacity. This replacement part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe lifting clamps. After replacement, the clamp must be fully inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps incorporating a swivel jaw configuration (confirm specific clamp model, series, and working load limit for correct swivel jaw selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement swivel jaw for Renfroe lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of jaw gripping performance and self-alignment function to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement swivel jaw Swivel function allows jaw to self-align to plate surface under load Accommodates minor variations in plate angle, surface irregularity, or rigging geometry Subject to gripping surface wear and swivel mechanism fatigue requiring regular inspection Manufactured to original dimensional, material, and hardness specifications for correct fit and performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the swivel jaw gripping surface, teeth, and swivel mechanism at every scheduled maintenance interval and before each use. Replace immediately if gripping surface wear, tooth damage, swivel mechanism wear, or deformation is detected. Confirm the specific Renfroe clamp model, series, and working load limit before ordering to ensure the correct swivel jaw is selected. Installation must be performed by a qualified person. Verify correct jaw grip and swivel function before returning the clamp to service.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099504169201,"sku":"1-1-2-astl-4","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-1-2-astl-6","title":"SHACKLE LINK FOR LIFTING CLAMP 1-1\/2 TON","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Shackle Link for Lifting Clamp is a genuine OEM replacement component designed to serve as the connecting link between a Renfroe lifting clamp and the shackle or rigging hardware above it. The shackle link occupies a critical position in the load path, transferring the full working load from the clamp body to the shackle and rigging assembly above, and its structural integrity is therefore fundamental to the safety and reliability of the complete lifting system. The dimensions and load geometry of this link are specific to the Renfroe lifting clamp series for which it is designed, ensuring correct fit at the clamp connection point and proper load alignment through the rigging system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eAs an intermediate load path component subject to tensile stress and wear from repeated loading cycles, the shackle link must be inspected regularly and maintained in serviceable condition to ensure the lifting system continues to perform within its rated working load limit. In demanding industrial environments such as steel mills, fabrication shops, and plate processing facilities, wear at the contact surfaces between the shackle link and the clamp body or shackle can develop over time, reducing the cross-sectional area of the link and potentially compromising its load-carrying capacity. Any sign of wear, elongation, surface cracking, or deformation requires immediate removal from service and replacement with a genuine Renfroe OEM part.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe shackle links are manufactured to the original dimensional and material specifications of the clamp series for which they are designed, ensuring correct fit, full load compatibility, and reliable performance throughout the service life of the component. This part is intended for use by qualified rigging and maintenance personnel performing authorized servicing or inspection of Renfroe lifting clamps, and the complete clamp and rigging assembly must be inspected before returning to service after shackle link replacement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct shackle link selection) Renfroe lifting shackles and compatible overhead rigging hardware\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Connecting link between Renfroe lifting clamp body and shackle or rigging hardware Primary load transfer component within the clamp-to-rigging connection Replacement shackle link for scheduled clamp maintenance and inspection programs Restoration of clamp-to-rigging load path integrity to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement shackle link for lifting clamps Critical intermediate load path component between clamp body and shackle Subject to tensile stress and contact wear requiring regular inspection Manufactured to original dimensional and material specifications for correct fit and load compatibility Supports safe clamp maintenance and rated load path performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the shackle link before every use. Remove from service immediately if wear, elongation, cracking, or deformation is detected. Confirm the specific Renfroe clamp model and working load limit before ordering to ensure the correct shackle link is selected. Installation must be performed by a qualified person. Inspect the complete clamp and rigging assembly before returning to service after replacement.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099504201969,"sku":"1-1-2-astl-6","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-1-2-astl-7","title":"SHACKLE LINK PIN ASSY","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Shackle Link Pin Assembly is a genuine OEM replacement component designed for use with Renfroe lifting clamps and their associated shackle link connections. The pin assembly secures the shackle link within the clamp body or rigging connection point, maintaining correct alignment and preventing the link from disengaging during lifting operations. As a retaining component within a primary load path connection, the pin assembly must be in full serviceable condition at all times to ensure the shackle link remains positively secured throughout every lift cycle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eIn regular industrial service, pin assemblies are subject to shear stress, wear at the bearing surfaces, and fatigue from repeated loading and unloading cycles. In high-production environments such as steel mills, fabrication shops, and plate processing facilities, this wear can accumulate more rapidly, making regular inspection of the pin assembly an important part of a comprehensive clamp and rigging maintenance program. Wear, bending, surface damage, or dimensional change in the pin can affect the security of the shackle link connection and must be addressed immediately with replacement using a genuine Renfroe OEM part before the clamp is returned to service.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe shackle link pin assemblies are manufactured to the original dimensional and material specifications, ensuring correct fit within the clamp body and shackle link connection and full compatibility with the surrounding components. This replacement part is intended for installation by qualified maintenance personnel performing authorized servicing or inspection of Renfroe lifting clamps. The complete clamp and rigging assembly must be inspected and function tested before returning to service after pin assembly replacement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps and shackle link assemblies (confirm specific clamp model, series, and working load limit for correct pin assembly selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement pin assembly for Renfroe lifting clamp shackle link connections Scheduled clamp and rigging maintenance, inspection, and rebuild programs Restoration of shackle link retention and alignment to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement shackle link pin assembly Retaining component securing shackle link within clamp body or rigging connection point Subject to shear stress and wear requiring regular inspection Manufactured to original dimensional and material specifications for correct fit and retention Supports safe clamp maintenance and secure shackle link connection\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the pin assembly before every use. Remove from service immediately if wear, bending, surface damage, or dimensional change is detected. Confirm the specific Renfroe clamp model and working load limit before ordering to ensure the correct pin assembly is selected. Installation must be performed by a qualified person. Inspect the complete clamp and rigging assembly before returning to service after replacement.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099504234737,"sku":"1-1-2-astl-7","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-1-2astl-1","title":"SHACKLE LIFTING FOR AFL LIFTING CLAMP 1-","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Lifting Shackle is a heavy-duty rigging component designed to provide a secure and reliable connection point between Renfroe lifting clamps and the rigging hardware above them, including hooks, slings, chains, and hoist assemblies. As a primary load path component, the lifting shackle transfers the full working load from the clamp to the overhead rigging system, making its structural integrity and condition critical to the safety of every lifting operation in which it is used. Renfroe lifting shackles are built to the quality standards that define the Renfroe product line, ensuring dependable performance in demanding industrial environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eIn steel mills, fabrication shops, plate processing facilities, and other heavy industrial settings, lifting shackles are subject to tensile stress, wear at the pin and bow contact points, and fatigue from repeated loading and unloading cycles. Over time, wear at the hook or rigging contact point, elongation of the bow, surface cracking, thread damage on the pin, or deformation of the body can develop, any of which may reduce the load-carrying capacity of the shackle below its rated working load limit. Because the shackle is a critical link in the lifting chain, it must be inspected before every use and removed from service immediately whenever any sign of wear, damage, or dimensional change is detected.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eRenfroe lifting shackles are intended for use with Renfroe lifting clamps and compatible rigging hardware, and should always be selected based on the working load limit of the clamp and the total load to be lifted. The shackle pin must be fully seated and secured before every lift, and the shackle must never be side-loaded or used in a configuration that applies force outside the plane of the bow unless specifically rated for that application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps and compatible overhead rigging hardware\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Connection between Renfroe lifting clamps and overhead rigging hardware Primary load transfer link in plate lifting and rigging assemblies Steel mill, fabrication shop, and heavy industrial lifting applications Use with hooks, slings, chains, and hoist assemblies within the rated working load limit\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Heavy-duty alloy steel construction for demanding industrial lifting applications Primary load-bearing connection between lifting clamp and overhead rigging Subject to tensile stress and wear requiring regular pre-use inspection Pin must be fully seated and secured before every lift Compatible with Renfroe lifting clamps and standard rigging hardware\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the shackle body, pin, and threads before every use. Remove from service immediately if wear, elongation, cracking, thread damage, or deformation is detected. Never exceed the rated working load limit. Ensure the pin is fully threaded and secured before lifting. Do not side-load unless the shackle is specifically rated for that application. Confirm working load limit compatibility with the clamp and rigging system before use.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099504300273,"sku":"1-1-2astl-1","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-bd-1","title":"BD - 1 TON - LIFTING SHACKLE","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe BD Lifting Shackle is a heavy-duty rigging shackle engineered for demanding industrial lifting and rigging applications. Designed to deliver reliable performance under load, the BD series shackle is built to withstand the rigors of steel mill, fabrication, construction, and general industrial environments where dependable load control is essential.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eConstructed for a 1 Ton working load limit, this shackle provides a secure connection point between lifting equipment and loads, offering a robust and time-tested design trusted by rigging professionals. The BD designation identifies it within Renfroe's established line of lifting and clamping accessories, ensuring compatibility with standard rigging practices and equipment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThe shackle is suitable for use in a wide range of overhead lifting configurations and is intended to be used in conjunction with Renfroe lifting clamps, hoists, and other compatible rigging hardware. As with all Renfroe products, the BD Lifting Shackle is manufactured to meet the demands of professional industrial users who require consistent, dependable performance in critical lifting operations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Overhead lifting and rigging Connection between lifting clamps and hoists Steel mill and fabrication applications Construction and general industrial rigging Attachment point for Renfroe lifting clamps\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: 1 Ton working load limit BD series designation for compatibility with Renfroe lifting clamp systems Heavy-duty alloy steel construction Designed for repeated use in demanding industrial environments Standard rigging shackle configuration\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Always inspect shackle before each use. Do not exceed the rated working load limit. Use only in applications for which the shackle is designed and rated.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099504333041,"sku":"1-bd-1","price":0.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"1-bd-4","title":"SWIVEL JAW FOR 1 TON PLATE CLAMP BD","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Swivel Jaw is a genuine OEM replacement component designed for use with Renfroe lifting clamps that incorporate a swivel jaw configuration. The swivel jaw provides the gripping interface between the clamp and the workpiece while incorporating a swivel function that allows the jaw to rotate and self-align to the plate surface as clamping force is applied, accommodating minor variations in plate angle, surface irregularity, or rigging geometry without compromising the integrity of the grip. This self-aligning capability ensures consistent jaw contact and reliable clamping force distribution across the gripping surface, contributing to secure and dependable plate retention throughout every lift cycle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eAs a component that contacts the workpiece directly with every lift cycle, the swivel jaw is subject to wear at the gripping surface and teeth, fatigue at the swivel mechanism, and impact damage from the demands of regular industrial use in fabrication shops, steel service centers, steel mills, and plate processing facilities. Wear of the gripping teeth or surface reduces the jaw's ability to grip the plate securely under load, while wear or damage at the swivel mechanism can affect the jaw's ability to self-align correctly, either of which requires immediate replacement with a genuine Renfroe OEM swivel jaw to restore the clamp's gripping performance and self-alignment function to its original specification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe swivel jaws are manufactured to the original dimensional, material, and hardness specifications of the clamp series for which they are designed, ensuring correct fit within the clamp body and reliable gripping and swivel performance at the clamp's rated capacity. This replacement part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe lifting clamps. After replacement, the clamp must be fully inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps incorporating a swivel jaw configuration (confirm specific clamp model, series, and working load limit for correct swivel jaw selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement swivel jaw for Renfroe lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of jaw gripping performance and self-alignment function to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement swivel jaw Swivel function allows jaw to self-align to plate surface under load Accommodates minor variations in plate angle, surface irregularity, or rigging geometry Subject to gripping surface wear and swivel mechanism fatigue requiring regular inspection Manufactured to original dimensional, material, and hardness specifications for correct fit and performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the swivel jaw gripping surface, teeth, and swivel mechanism at every scheduled maintenance interval and before each use. Replace immediately if gripping surface wear, tooth damage, swivel mechanism wear, or deformation is detected. Confirm the specific Renfroe clamp model, series, and working load limit before ordering to ensure the correct swivel jaw is selected. Installation must be performed by a qualified person. Verify correct jaw grip and swivel function before returning the clamp to service.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099504365809,"sku":"1-bd-4","price":72.33,"currency_code":"CAD","in_stock":true}]},{"product_id":"1-bd-8","title":"GRIPPING CAM FOR 1TON BD CLAMP","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Gripping Cam is a genuine OEM replacement component and the primary load-engaging element within the Renfroe lifting clamp mechanism. The gripping cam is the surface that makes direct contact with the workpiece, biting into the material as the clamp is loaded and generating the clamping force that secures the plate or structural member during lifting. The geometry, surface hardness, and condition of the gripping cam are directly responsible for the quality and reliability of the grip, making it one of the most functionally critical wear components in the entire clamp assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eIn active industrial use, the gripping cam surface is subject to abrasive wear from repeated contact with mill scale, rough plate surfaces, and varying material conditions. Over time, the cam teeth or gripping surface can become worn smooth, chipped, or deformed, reducing the cam's ability to bite into the workpiece and maintain secure clamping force under load. A worn gripping cam represents a direct safety risk, as reduced grip can lead to slippage or load drop during lifting. For this reason, the gripping cam must be inspected at every scheduled maintenance interval and replaced with a genuine Renfroe OEM part as soon as any degradation of the gripping surface is identified.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe gripping cams are manufactured to the original surface hardness, tooth geometry, and dimensional specifications, ensuring that the replacement cam engages the workpiece with the same reliability and holding power as the original equipment. This part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe lifting clamps, and the clamp must be fully inspected and function tested before being returned to service after gripping cam replacement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Hardened alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct gripping cam selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement gripping cam for Renfroe lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of workpiece engagement and clamping force to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement part Primary workpiece contact and load-engaging component within the clamp mechanism Hardened gripping surface designed to bite into plate and structural material under load Worn or damaged gripping cam is a direct safety risk requiring immediate replacement Manufactured to original surface hardness, tooth geometry, and dimensional specifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the gripping cam surface at every scheduled maintenance interval and before each use. Replace immediately if the gripping surface shows wear, smoothing, chipping, or deformation. Confirm the specific Renfroe clamp model and working load limit before ordering. Installation must be performed by a qualified person. Conduct a full clamp inspection and function test before returning to service.\u003c\/span\u003e\u003cspan class=\"_Container_wxr42_1 _loadingIndicator_1iy4o_52 _ContainerInline_wxr42_15 _ContainerHidden_wxr42_19 _ContainerPaused_wxr42_10\" role=\"status\"\u003e\u003cspan class=\"_Dots_wxr42_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099504431345,"sku":"1-bd-8","price":156.48,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-fr-2","title":"CAM ASSEMBLY 1 TON","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Cam Assembly is a genuine OEM replacement part for Renfroe lifting clamps, representing one of the most functionally critical components within the clamp mechanism. The cam is the primary element responsible for generating and maintaining clamping force on the workpiece — as the clamp is lifted, the cam rotates and drives the jaw into the material, creating a self-tightening grip that increases proportionally with the applied load. The integrity of this assembly is fundamental to the safe and reliable operation of the clamp.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eWith repeated use in demanding industrial environments, the cam assembly is subject to wear at its contact surfaces, particularly where it interfaces with the jaw, roller, and body of the clamp. A worn or damaged cam can result in reduced clamping force, inconsistent jaw engagement, or failure to hold the rated working load limit. For this reason, the cam assembly should be inspected at every scheduled maintenance interval and replaced with a genuine Renfroe part whenever wear, surface damage, deformation, or cracking is identified.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eRenfroe cam assemblies are manufactured to the same specifications as the original equipment, ensuring correct geometry, surface hardness, and dimensional tolerances are maintained after replacement. This part is intended for installation by qualified personnel familiar with Renfroe clamp disassembly, inspection, and reassembly procedures. Returning a clamp to service with a properly fitted OEM cam assembly restores the clamp to its original rated performance and safety standard.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model and capacity for correct cam assembly selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement cam assembly for Renfroe lifting clamps Scheduled maintenance, inspection, and clamp rebuild programs Restoration of clamping mechanism to OEM specification and rated performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement part Primary load-bearing and clamping force component within the clamp mechanism Self-tightening cam geometry increases grip proportionally with applied load Manufactured to original equipment dimensional, hardness, and tolerance specifications Critical wear component requiring regular inspection and timely replacement\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Confirm the specific Renfroe clamp model and working load limit before ordering to ensure the correct cam assembly is selected. Installation must be performed by a qualified person. Always conduct a full clamp inspection and function test before returning to service after cam replacement.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099504824561,"sku":"1-fr-2","price":337.05,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-fr-3","title":"SHACKLE PIN FOR VERTICAL CLAMP 1 TON","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Shackle Pin is a genuine OEM replacement component designed for use with Renfroe lifting shackles. The shackle pin is the threaded or bolt-type fastener that closes the bow of the shackle, completing the load-bearing connection between the shackle and the rigging hardware or clamp attachment point. As the component that maintains the integrity of the shackle connection under load, the pin must be fully seated, correctly threaded, and secured before every lift, and must be maintained in full serviceable condition throughout its service life to ensure the shackle performs within its rated working load limit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eIn regular industrial service, shackle pins are subject to tensile and shear stress, wear at the thread engagement and bearing surfaces, and fatigue from repeated installation, loading, and removal cycles. In demanding environments such as steel mills, fabrication shops, and plate processing facilities, thread wear, surface damage, bending, or corrosion can develop over time, reducing the pin's ability to remain fully secured under load or to carry its share of the working load safely. Any sign of thread damage, wear, bending, corrosion, or deformation requires immediate replacement with a genuine Renfroe OEM shackle pin before the shackle is returned to service.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe shackle pins are manufactured to the original dimensional, thread, and material specifications of the shackle for which they are designed, ensuring correct fit, full thread engagement, and load compatibility with the shackle bow and retaining hardware. This replacement part is intended for use by qualified rigging and maintenance personnel performing authorized servicing or inspection of Renfroe lifting shackles. The complete shackle assembly must be inspected before returning to service after pin replacement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting shackles (confirm specific shackle model and working load limit for correct pin selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement pin for Renfroe lifting shackles Scheduled shackle maintenance and inspection programs Restoration of shackle pin engagement and load-bearing integrity to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement shackle pin Closes the shackle bow and completes the load-bearing connection under working load Subject to tensile and shear stress, thread wear, and fatigue requiring regular inspection Manufactured to original dimensional, thread, and material specifications for correct fit and engagement Must be fully seated and secured before every lift\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the shackle pin threads, body, and bearing surfaces before every use. Replace immediately if thread damage, wear, bending, corrosion, or deformation is detected. Confirm the specific Renfroe shackle model and working load limit before ordering to ensure the correct pin is selected. Ensure the pin is fully threaded and secured with the cotter pin or nut before lifting. Never use a damaged or worn pin.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099504890097,"sku":"1-fr-3","price":0.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"1-fr-5","title":"SWIVEL JAW\/ PIVOT 1 TON","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Swivel Jaw is a genuine OEM replacement component designed for use with Renfroe lifting clamps that incorporate a swivel jaw configuration. The swivel jaw provides the gripping interface between the clamp and the workpiece while incorporating a swivel function that allows the jaw to rotate and self-align to the plate surface as clamping force is applied, accommodating minor variations in plate angle, surface irregularity, or rigging geometry without compromising the integrity of the grip. This self-aligning capability ensures consistent jaw contact and reliable clamping force distribution across the gripping surface, contributing to secure and dependable plate retention throughout every lift cycle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eAs a component that contacts the workpiece directly with every lift cycle, the swivel jaw is subject to wear at the gripping surface and teeth, fatigue at the swivel mechanism, and impact damage from the demands of regular industrial use in fabrication shops, steel service centers, steel mills, and plate processing facilities. Wear of the gripping teeth or surface reduces the jaw's ability to grip the plate securely under load, while wear or damage at the swivel mechanism can affect the jaw's ability to self-align correctly, either of which requires immediate replacement with a genuine Renfroe OEM swivel jaw to restore the clamp's gripping performance and self-alignment function to its original specification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe swivel jaws are manufactured to the original dimensional, material, and hardness specifications of the clamp series for which they are designed, ensuring correct fit within the clamp body and reliable gripping and swivel performance at the clamp's rated capacity. This replacement part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe lifting clamps. After replacement, the clamp must be fully inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps incorporating a swivel jaw configuration (confirm specific clamp model, series, and working load limit for correct swivel jaw selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement swivel jaw for Renfroe lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of jaw gripping performance and self-alignment function to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement swivel jaw Swivel function allows jaw to self-align to plate surface under load Accommodates minor variations in plate angle, surface irregularity, or rigging geometry Subject to gripping surface wear and swivel mechanism fatigue requiring regular inspection Manufactured to original dimensional, material, and hardness specifications for correct fit and performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the swivel jaw gripping surface, teeth, and swivel mechanism at every scheduled maintenance interval and before each use. Replace immediately if gripping surface wear, tooth damage, swivel mechanism wear, or deformation is detected. Confirm the specific Renfroe clamp model, series, and working load limit before ordering to ensure the correct swivel jaw is selected. Installation must be performed by a qualified person. Verify correct jaw grip and swivel function before returning the clamp to service.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099504922865,"sku":"1-fr-5","price":107.86,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-fr-6","title":"LOCK SPRING FOR VERTICAL CLAMP 1 TON","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Lock Spring is a genuine OEM replacement component designed for use with Renfroe lifting clamps that incorporate a locking mechanism. The lock spring provides the tension necessary to keep the locking mechanism engaged in its default locked position, ensuring that the lock does not disengage unintentionally during lifting, transport, or positioning operations. Without a properly functioning lock spring, the locking mechanism may fail to remain engaged under the vibration, movement, and dynamic loading conditions present in an active industrial lifting environment, compromising the security of the clamp and creating a risk of unintended jaw release.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eAs a spring component subject to repeated compression and extension with every lock engagement and release cycle, the lock spring is susceptible to fatigue, loss of tension, permanent set, cracking, or breakage over time. In high-cycle production environments such as steel mills, fabrication shops, and plate processing facilities, this fatigue can accumulate more rapidly, making regular inspection of the lock spring an important part of a comprehensive clamp maintenance program. Any loss of spring tension, visible deformation, or physical damage requires immediate replacement with a genuine Renfroe OEM part to restore the locking mechanism to its original retention force and reliability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe lock springs are manufactured to the original load and dimensional specifications, ensuring correct fit within the clamp body and proper tension on the locking mechanism components. This replacement part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe locking type lifting clamps. After replacement, the clamp must be fully inspected and function tested, including verification that the lock engages and retains correctly under simulated operating conditions, before being returned to service.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel spring\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps incorporating a locking mechanism (confirm specific clamp model, series, and working load limit for correct lock spring selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement lock spring for Renfroe locking type lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of locking mechanism retention force and reliability to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement part Maintains locking mechanism engagement under dynamic lifting and transport conditions Subject to fatigue and loss of tension in high-cycle applications requiring regular inspection Manufactured to original load and dimensional specifications for correct fit and retention force Supports safe clamp maintenance and reliable locking function\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the lock spring at every scheduled maintenance interval and before each use. Replace immediately if loss of tension, deformation, cracking, or breakage is detected. Confirm the specific Renfroe clamp model and working load limit before ordering to ensure the correct lock spring is selected. Installation must be performed by a qualified person. Verify correct lock engagement and retention function before returning the clamp to service.\u003c\/span\u003e\u003cspan class=\"_Container_wxr42_1 _loadingIndicator_1iy4o_52 _ContainerInline_wxr42_15 _ContainerHidden_wxr42_19 _ContainerPaused_wxr42_10\" role=\"status\"\u003e\u003cspan class=\"_Dots_wxr42_10\"\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099504955633,"sku":"1-fr-6","price":49.4,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-fr-rk","title":"PLATE CLAMP REPAIR KIT FOR 1 TON FR 0-3\/","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Plate Clamp Repair Kit is a genuine OEM kit containing the replacement components necessary to service and restore Renfroe plate clamps to their original operating specification. Repair kits are designed to provide the critical wear parts most commonly requiring replacement during scheduled maintenance or following inspection findings, packaged together as a matched set to simplify the repair process and ensure that all replaced components meet the original dimensional, material, and hardness specifications required for safe operation at the clamp's rated working load limit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eRegular inspection and timely repair of plate clamps is essential to maintaining safe lifting performance in industrial environments. Components such as the cam, gripping cam, cam pin, bottom roller, and spring are subject to progressive wear from repeated lifting cycles, contact with mill scale and rough plate surfaces, and the mechanical stresses of heavy industrial use. Allowing these components to remain in service beyond their serviceable condition can reduce the clamp's clamping force, jaw engagement reliability, and ultimately its ability to hold the rated working load limit safely. The Renfroe Plate Clamp Repair Kit provides the parts needed to address this wear before it reaches a level that compromises safe clamp performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThis kit is intended for use by qualified maintenance personnel familiar with Renfroe plate clamp disassembly, inspection, and reassembly procedures. Using genuine Renfroe OEM repair kit components ensures correct fit and full compatibility with the existing clamp body and surrounding hardware, restoring the clamp mechanism to its original operating condition. The fully repaired clamp must be inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel components\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe plate clamps (confirm specific clamp model, series, and working load limit for correct repair kit selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Scheduled maintenance and repair of Renfroe plate clamps Replacement of critical wear components identified during inspection Restoration of clamp mechanism to OEM specification and rated performance Extension of clamp service life through timely component replacement\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM repair kit Contains matched set of critical wear components for plate clamp servicing Ensures all replaced parts meet original dimensional, material, and hardness specifications Simplifies the repair process with a complete set of commonly replaced components Supports safe clamp maintenance and restoration of rated working load limit performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Confirm the specific Renfroe plate clamp model, series, and working load limit before ordering to ensure the correct repair kit is selected. Repair must be performed by a qualified person familiar with Renfroe clamp maintenance procedures. Conduct a full clamp inspection and function test before returning the repaired clamp to service.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099505021169,"sku":"1-fr-rk","price":1061.3,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-jpa-5","title":"CAM ASSEMBLY 1 TON RENFROE","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Cam Assembly is a genuine OEM replacement part for Renfroe lifting clamps, representing one of the most functionally critical components within the clamp mechanism. The cam is the primary element responsible for generating and maintaining clamping force on the workpiece — as the clamp is lifted, the cam rotates and drives the jaw into the material, creating a self-tightening grip that increases proportionally with the applied load. The integrity of this assembly is fundamental to the safe and reliable operation of the clamp.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eWith repeated use in demanding industrial environments, the cam assembly is subject to wear at its contact surfaces, particularly where it interfaces with the jaw, roller, and body of the clamp. A worn or damaged cam can result in reduced clamping force, inconsistent jaw engagement, or failure to hold the rated working load limit. For this reason, the cam assembly should be inspected at every scheduled maintenance interval and replaced with a genuine Renfroe part whenever wear, surface damage, deformation, or cracking is identified.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eRenfroe cam assemblies are manufactured to the same specifications as the original equipment, ensuring correct geometry, surface hardness, and dimensional tolerances are maintained after replacement. This part is intended for installation by qualified personnel familiar with Renfroe clamp disassembly, inspection, and reassembly procedures. Returning a clamp to service with a properly fitted OEM cam assembly restores the clamp to its original rated performance and safety standard.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model and capacity for correct cam assembly selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement cam assembly for Renfroe lifting clamps Scheduled maintenance, inspection, and clamp rebuild programs Restoration of clamping mechanism to OEM specification and rated performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement part Primary load-bearing and clamping force component within the clamp mechanism Self-tightening cam geometry increases grip proportionally with applied load Manufactured to original equipment dimensional, hardness, and tolerance specifications Critical wear component requiring regular inspection and timely replacement\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Confirm the specific Renfroe clamp model and working load limit before ordering to ensure the correct cam assembly is selected. Installation must be performed by a qualified person. Always conduct a full clamp inspection and function test before returning to service after cam replacement.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099505053937,"sku":"1-jpa-5","price":250.18,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-jpa-8","title":"SWIVEL 1 TON JAW FOR RENFROE JA","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe JA Swivel Jaw rated at 1 Ton working load limit is a genuine OEM replacement component designed specifically for use with Renfroe JA series lifting clamps. The swivel jaw provides the gripping interface between the clamp and the workpiece while incorporating a swivel function that allows the jaw to rotate and self-align to the plate surface as clamping force is applied, accommodating minor variations in plate angle, surface irregularity, or rigging geometry without compromising the integrity of the grip. This self-aligning capability is particularly valuable in applications where the plate surface may not be perfectly perpendicular to the clamp body, ensuring consistent jaw contact and reliable clamping force distribution across the gripping surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eAs a component that contacts the workpiece directly with every lift cycle, the swivel jaw is subject to wear at the gripping surface, fatigue at the swivel mechanism, and impact damage from the demands of regular industrial use in fabrication shops, steel service centers, steel mills, and plate processing facilities. Wear of the gripping teeth or surface reduces the jaw's ability to grip the plate securely, while wear or damage at the swivel mechanism can affect the jaw's ability to self-align correctly under load. Either condition requires immediate replacement with a genuine Renfroe OEM swivel jaw to restore the clamp's gripping performance and self-alignment function to its original specification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe JA series swivel jaws are manufactured to the original dimensional, material, and hardness specifications, ensuring correct fit within the JA clamp body and reliable gripping and swivel performance at the 1 Ton rated capacity. This replacement part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe JA series lifting clamps. After replacement, the clamp must be fully inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe JA series lifting clamps - 1 Ton working load limit (confirm specific JA clamp model for correct swivel jaw selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement swivel jaw for Renfroe JA series 1 Ton lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of jaw gripping performance and self-alignment function to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement swivel jaw for JA series 1 Ton lifting clamps Swivel function allows jaw to self-align to plate surface under load Accommodates minor variations in plate angle, surface irregularity, or rigging geometry Subject to gripping surface wear and swivel mechanism fatigue requiring regular inspection Manufactured to original dimensional, material, and hardness specifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the swivel jaw gripping surface and swivel mechanism at every scheduled maintenance interval and before each use. Replace immediately if gripping surface wear, tooth damage, swivel mechanism wear, or deformation is detected. Confirm the specific Renfroe JA clamp model before ordering to ensure the correct 1 Ton swivel jaw is selected. Installation must be performed by a qualified person. Verify correct jaw grip and swivel function before returning the clamp to service.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099505119473,"sku":"1-jpa-8","price":104.2,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-lj-rk","title":"REBUILD KIT FOR PLATE CLAMP 1 TON","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Rebuild Kit is a genuine OEM kit containing the replacement components necessary to fully rebuild and restore a Renfroe lifting clamp to its original operating specification and rated working load limit performance. By providing all critical wear parts as a matched set, the rebuild kit simplifies the overhaul process and ensures that every component replaced during the rebuild meets the original dimensional, material, and hardness specifications required for safe operation at the clamp's rated capacity. Using a genuine Renfroe OEM rebuild kit eliminates the risk of introducing non-OEM components that may not meet the exacting requirements of a rated industrial lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eLifting clamps used in regular industrial service accumulate wear across multiple components simultaneously, including the cam, gripping cam, cam pin, bottom roller, spring, and related hardware. In high-production environments such as steel mills, fabrication shops, and plate processing facilities, this wear can progress more rapidly, making scheduled full rebuilds an important part of a comprehensive clamp maintenance program. Performing a complete rebuild at the appropriate interval addresses wear across all critical components at once, restoring the clamp mechanism to its original operating condition and extending the service life of the clamp body before individual component failures can occur.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThis kit is intended for use by qualified maintenance personnel familiar with Renfroe lifting clamp disassembly, inspection, and reassembly procedures. Genuine Renfroe OEM rebuild kit components are manufactured to the original specifications, ensuring correct fit and full compatibility with the existing clamp body and surrounding hardware. The fully rebuilt clamp must be inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel components\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct rebuild kit selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Full rebuild and restoration of Renfroe lifting clamps Scheduled clamp overhaul and heavy maintenance programs Replacement of all critical wear components as a matched OEM set Extension of clamp service life while restoring rated working load limit performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM rebuild kit Contains matched set of critical wear components for complete clamp rebuild Ensures all replaced parts meet original dimensional, material, and hardness specifications Addresses wear across all critical components simultaneously during scheduled overhaul Simplifies the rebuild process and eliminates the risk of non-OEM component substitution\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Confirm the specific Renfroe clamp model, series, and working load limit before ordering to ensure the correct rebuild kit is selected. Rebuild must be performed by a qualified person familiar with Renfroe clamp maintenance procedures. Conduct a full clamp inspection and function test before returning the rebuilt clamp to service.\u003c\/span\u003e\u003cspan class=\"_Container_wxr42_1 _loadingIndicator_1iy4o_52 _ContainerInline_wxr42_15 _ContainerHidden_wxr42_19 _ContainerPaused_wxr42_10\" role=\"status\"\u003e\u003cspan class=\"_Dots_wxr42_10\"\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099505152241,"sku":"1-lj-rk","price":0.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"1-m-rk","title":"REPAIR KIT FOR MODEL M  CLAMP 1 TON","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThe Renfroe Repair Kit is a genuine OEM kit containing the replacement components necessary to service and restore Renfroe lifting clamps to their original operating specification and rated working load limit performance. Designed to provide the critical wear parts most commonly requiring replacement during scheduled maintenance or following inspection findings, the kit packages these components together as a matched set to simplify the repair process and ensure that all replaced parts meet the original dimensional, material, and hardness specifications required for safe operation at the clamp's rated capacity. Using a genuine Renfroe OEM repair kit eliminates the risk of introducing non-OEM components that may not meet the exacting requirements of a rated industrial lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThe wear components within a Renfroe lifting clamp — including the cam, gripping cam, cam pin, bottom roller, and spring — are subject to progressive wear from repeated lifting cycles, contact with plate surfaces and mill scale, and the mechanical stresses of daily industrial use in demanding environments such as steel mills, fabrication shops, and plate processing facilities. Timely replacement of these components using a genuine Renfroe repair kit prevents wear from reaching a level that compromises the clamp's clamping force, jaw engagement reliability, or ability to hold its rated working load limit safely. Performing repairs at the appropriate maintenance interval extends the service life of the clamp body and maintains the integrity of the lifting system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThis kit is intended for use by qualified maintenance personnel familiar with Renfroe lifting clamp disassembly, inspection, and reassembly procedures. Genuine Renfroe OEM repair kit components are manufactured to the original specifications, ensuring correct fit and full compatibility with the existing clamp body and surrounding hardware. The fully repaired clamp must be inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel components\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct repair kit selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Scheduled maintenance and repair of Renfroe lifting clamps Replacement of critical wear components identified during inspection Restoration of clamp mechanism to OEM specification and rated performance Extension of clamp service life through timely component replacement\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM repair kit Contains matched set of critical wear components for clamp servicing Ensures all replaced parts meet original dimensional, material, and hardness specifications Simplifies the repair process with a complete set of commonly replaced components Supports safe clamp maintenance and restoration of rated working load limit performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Confirm the specific Renfroe clamp model, series, and working load limit before ordering to ensure the correct repair kit is selected. Repair must be performed by a qualified person familiar with Renfroe clamp maintenance procedures. Conduct a full clamp inspection and function test before returning the repaired clamp to service.\u003c\/span\u003e\u003cspan class=\"_Container_wxr42_1 _loadingIndicator_1iy4o_52 _ContainerInline_wxr42_15 _ContainerHidden_wxr42_19 _ContainerPaused_wxr42_10\" role=\"status\"\u003e\u003cspan class=\"_Dots_wxr42_10\"\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099505185009,"sku":"1-m-rk","price":449.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"1-nm-1","title":"LIFTING SHACKLE","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThe Renfroe Lifting Shackle is a heavy-duty rigging component designed to provide a secure and reliable connection point between Renfroe lifting clamps and the rigging hardware above them, including hooks, slings, chains, and hoist assemblies. As a primary load path component, the lifting shackle transfers the full working load from the clamp to the overhead rigging system, making its structural integrity and condition critical to the safety of every lifting operation in which it is used. Renfroe lifting shackles are built to the quality standards that define the Renfroe product line, ensuring dependable performance in demanding industrial environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eIn steel mills, fabrication shops, plate processing facilities, and other heavy industrial settings, lifting shackles are subject to tensile stress, wear at the pin and bow contact points, and fatigue from repeated loading and unloading cycles. Over time, wear at the hook or rigging contact point, elongation of the bow, surface cracking, thread damage on the pin, or deformation of the body can develop, any of which may reduce the load-carrying capacity of the shackle below its rated working load limit. Because the shackle is a critical link in the lifting chain, it must be inspected before every use and removed from service immediately whenever any sign of wear, damage, or dimensional change is detected.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eRenfroe lifting shackles are intended for use with Renfroe lifting clamps and compatible rigging hardware, and should always be selected based on the working load limit of the clamp and the total load to be lifted. The shackle pin must be fully seated and secured before every lift, and the shackle must never be side-loaded or used in a configuration that applies force outside the plane of the bow unless specifically rated for that application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps and compatible overhead rigging hardware\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Connection between Renfroe lifting clamps and overhead rigging hardware Primary load transfer link in plate lifting and rigging assemblies Steel mill, fabrication shop, and heavy industrial lifting applications Use with hooks, slings, chains, and hoist assemblies within the rated working load limit\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Heavy-duty alloy steel construction for demanding industrial lifting applications Primary load-bearing connection between lifting clamp and overhead rigging Subject to tensile stress and wear requiring regular pre-use inspection Pin must be fully seated and secured before every lift Compatible with Renfroe lifting clamps and standard rigging hardware\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the shackle body, pin, and threads before every use. Remove from service immediately if wear, elongation, cracking, thread damage, or deformation is detected. Never exceed the rated working load limit. Ensure the pin is fully threaded and secured before lifting. Do not side-load unless the shackle is specifically rated for that application. Confirm working load limit compatibility with the clamp and rigging system before use.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099505283313,"sku":"1-nm-1","price":0.02,"currency_code":"CAD","in_stock":true}]},{"product_id":"1-nm-2","title":"SHACKLE PIN","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Shackle Pin is a genuine OEM replacement component designed for use with Renfroe lifting shackles. The shackle pin is the threaded or bolt-type fastener that closes the bow of the shackle, completing the load-bearing connection between the shackle and the rigging hardware or clamp attachment point. As the component that maintains the integrity of the shackle connection under load, the pin must be fully seated, correctly threaded, and secured before every lift, and must be maintained in full serviceable condition throughout its service life to ensure the shackle performs within its rated working load limit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eIn regular industrial service, shackle pins are subject to tensile and shear stress, wear at the thread engagement and bearing surfaces, and fatigue from repeated installation, loading, and removal cycles. In demanding environments such as steel mills, fabrication shops, and plate processing facilities, thread wear, surface damage, bending, or corrosion can develop over time, reducing the pin's ability to remain fully secured under load or to carry its share of the working load safely. Any sign of thread damage, wear, bending, corrosion, or deformation requires immediate replacement with a genuine Renfroe OEM shackle pin before the shackle is returned to service.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe shackle pins are manufactured to the original dimensional, thread, and material specifications of the shackle for which they are designed, ensuring correct fit, full thread engagement, and load compatibility with the shackle bow and retaining hardware. This replacement part is intended for use by qualified rigging and maintenance personnel performing authorized servicing or inspection of Renfroe lifting shackles. The complete shackle assembly must be inspected before returning to service after pin replacement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting shackles (confirm specific shackle model and working load limit for correct pin selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement pin for Renfroe lifting shackles Scheduled shackle maintenance and inspection programs Restoration of shackle pin engagement and load-bearing integrity to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement shackle pin Closes the shackle bow and completes the load-bearing connection under working load Subject to tensile and shear stress, thread wear, and fatigue requiring regular inspection Manufactured to original dimensional, thread, and material specifications for correct fit and engagement Must be fully seated and secured before every lift\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the shackle pin threads, body, and bearing surfaces before every use. Replace immediately if thread damage, wear, bending, corrosion, or deformation is detected. Confirm the specific Renfroe shackle model and working load limit before ordering to ensure the correct pin is selected. Ensure the pin is fully threaded and secured with the cotter pin or nut before lifting. Never use a damaged or worn pin.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099505316081,"sku":"1-nm-2","price":0.02,"currency_code":"CAD","in_stock":true}]},{"product_id":"1-nm-3","title":"CONNECTING LINK FOR RENFROE PLATE LIFTER","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Connecting Link is a genuine OEM replacement component designed for use with Renfroe plate lifters, serving as the critical connection point between the lifting clamp and the rigging hardware above it. The connecting link transfers the full working load from the plate lifter to the hoist, hook, or rigging assembly, making it one of the most structurally significant components in the lifting system. Maintaining the integrity of this link through regular inspection and timely replacement with genuine Renfroe OEM parts is essential to the safe and reliable operation of the plate lifter in every lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eConnecting links are subject to tensile stress, wear at contact points, and fatigue from repeated loading and unloading cycles in demanding industrial environments such as steel mills, fabrication shops, and plate processing facilities. Over time, wear at the hook or shackle contact point, elongation, surface cracking, or deformation can develop, any of which may reduce the load-carrying capacity of the link below its rated working load limit. Because the connecting link is a primary load path component, it must be inspected before every use and replaced immediately whenever any sign of wear, damage, or dimensional change is detected.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThis replacement part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe plate lifters. Genuine Renfroe OEM connecting links are manufactured to the original dimensional and material specifications, ensuring correct fit with the plate lifter body and full compatibility with standard rigging hardware. Using an OEM connecting link restores the plate lifter to its original rated performance and maintains the integrity of the complete lifting system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe plate lifters (confirm specific plate lifter model and working load limit for correct connecting link selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement connecting link for Renfroe plate lifters Primary load transfer connection between plate lifter and rigging hardware Scheduled plate lifter maintenance, inspection, and rebuild programs Restoration of load path integrity to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement part Primary load-bearing connection between plate lifter and overhead rigging Subject to tensile stress and wear requiring regular pre-use inspection Manufactured to original dimensional and material specifications Supports safe plate lifter maintenance and rated load performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the connecting link before every use. Replace immediately if wear, elongation, cracking, deformation, or any dimensional change is detected. Confirm the specific Renfroe plate lifter model and working load limit before ordering to ensure the correct connecting link is selected. Installation must be performed by a qualified person.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099505545457,"sku":"1-nm-3","price":96.04,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-tl-8","title":"SPRING FOR 1 TON RENFROE","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Spring for 1 Ton lifting clamps is a genuine OEM replacement component designed to restore the spring function within Renfroe lifting clamps rated at 1 Ton working load limit. The spring plays an essential role in the clamp mechanism by maintaining the cam or jaw in its correct default position, ensuring consistent engagement with the workpiece when the clamp is applied and reliable release when the clamp is removed. Without a properly functioning spring, the cam or jaw may not return to its correct position between lifts, leading to inconsistent engagement, difficulty attaching the clamp to the workpiece, or unreliable release behavior that can compromise safe and efficient clamp operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eAs a spring component subject to repeated compression and extension with every clamp attachment and release cycle, the spring in a 1 Ton lifting clamp is susceptible to fatigue, loss of tension, permanent set, cracking, or breakage over time. In high-cycle production environments such as fabrication shops, steel service centers, and plate processing facilities, this fatigue can accumulate more rapidly, making regular inspection of the spring an important part of a comprehensive clamp maintenance program. Any loss of spring tension, visible deformation, cracking, or physical damage requires immediate replacement with a genuine Renfroe OEM spring to restore the clamp mechanism to its original operating specification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe springs for 1 Ton lifting clamps are manufactured to the original load and dimensional specifications, ensuring correct fit within the clamp body and proper tension on the cam or jaw mechanism. This replacement part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe 1 Ton lifting clamps. After replacement, the clamp must be fully inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel spring\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps - 1 Ton working load limit (confirm specific clamp model and series for correct spring selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement spring for Renfroe 1 Ton lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of cam or jaw return function and clamp mechanism operation to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement spring for 1 Ton lifting clamps Maintains cam or jaw in correct default position for consistent engagement and release Subject to fatigue and loss of tension in high-cycle applications requiring regular inspection Manufactured to original load and dimensional specifications for correct fit and tension Supports safe clamp maintenance and reliable mechanism function at 1 Ton rated capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the spring at every scheduled maintenance interval and before each use. Replace immediately if loss of tension, deformation, cracking, or breakage is detected. Confirm the specific Renfroe clamp model and series before ordering to ensure the correct 1 Ton spring is selected. Installation must be performed by a qualified person. Verify correct cam or jaw function before returning the clamp to service.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099505610993,"sku":"1-tl-8","price":64.29,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-tl-rk","title":"RENFROE PART REPAIR KIT 1TLRK 1 TON","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe 1TLRK Repair Kit is a genuine OEM replacement parts kit designed to service and restore Renfroe lifting clamps rated at 1 Ton working load limit. The 1TLRK designation identifies this kit within Renfroe's established parts system, ensuring the correct components are selected for the specific clamp model and capacity for which the kit is intended. By providing the critical wear parts as a matched set, the 1TLRK kit simplifies the repair process and ensures that all replaced components meet the original dimensional, material, and hardness specifications required for safe operation at the 1 Ton rated capacity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eIn regular industrial service, the wear components within a 1 Ton lifting clamp — including the cam, gripping cam, cam pin, bottom roller, and spring — are subject to progressive wear from repeated lifting cycles, contact with plate surfaces and mill scale, and the mechanical stresses of daily industrial use. Timely replacement of these components using a genuine Renfroe OEM repair kit prevents wear from reaching a level that compromises the clamp's clamping force, jaw engagement reliability, or ability to hold its rated working load limit safely. The 1TLRK kit provides the parts needed to address this wear efficiently during scheduled maintenance intervals or following inspection findings that indicate component replacement is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThis kit is intended for use by qualified maintenance personnel familiar with Renfroe lifting clamp disassembly, inspection, and reassembly procedures. Genuine Renfroe OEM kit components are manufactured to the original specifications, ensuring correct fit and full compatibility with the existing 1 Ton clamp body and surrounding hardware. The fully repaired clamp must be inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel components\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps - 1 Ton working load limit (confirm specific clamp model and series for correct kit application)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Scheduled maintenance and repair of Renfroe 1 Ton lifting clamps Replacement of critical wear components identified during inspection Restoration of clamp mechanism to OEM specification and rated performance Extension of clamp service life through timely component replacement\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM 1TLRK repair kit for 1 Ton lifting clamps Contains matched set of critical wear components for clamp servicing Ensures all replaced parts meet original dimensional, material, and hardness specifications Identified by 1TLRK part designation for correct kit selection within the Renfroe parts system Supports safe clamp maintenance and restoration of 1 Ton rated working load limit performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Confirm the specific Renfroe clamp model and series before ordering to ensure the 1TLRK kit is the correct selection for the clamp being serviced. Repair must be performed by a qualified person familiar with Renfroe clamp maintenance procedures. Conduct a full clamp inspection and function test before returning the repaired clamp to service.\u003c\/span\u003e\u003cspan class=\"_Container_wxr42_1 _loadingIndicator_1iy4o_52 _ContainerInline_wxr42_15 _ContainerHidden_wxr42_19 _ContainerPaused_wxr42_10\" role=\"status\"\u003e\u003cspan class=\"_Dots_wxr42_10\"\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099505840369,"sku":"1-tl-rk","price":538.39,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-ast-1","title":"LIFTING SHACKLE FOR LIFTING CLAMP 1\/2 TO","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Lifting Shackle for Lifting Clamp is a genuine OEM replacement shackle designed for use with Renfroe lifting clamps as the primary connection point between the clamp and the overhead rigging assembly. This shackle is engineered to the dimensional and load requirements of the Renfroe lifting clamp series for which it is specified, ensuring correct fit at the clamp bail or connection point and proper load alignment through the rigging system. As a primary load path component, the shackle transfers the full working load from the clamp to the hoist, hook, sling, or chain above it, and its structural integrity is fundamental to the safety of every lift in which it is used.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eLifting shackles used in regular industrial service are subject to tensile stress, wear at the pin and bow contact surfaces, and cumulative fatigue from repeated loading and unloading cycles. In demanding environments such as steel mills, fabrication shops, and plate processing facilities, this wear can progress more rapidly, making consistent pre-use inspection an essential part of safe rigging practice. Elongation of the bow, wear at the hook or rigging contact point, thread damage on the pin, surface cracking, or any visible deformation are all conditions that require the shackle to be immediately removed from service and replaced with a genuine Renfroe OEM part before the clamp is used again.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe lifting shackles are manufactured to the original dimensional and material specifications of the clamp series for which they are designed, ensuring correct fit, full load compatibility, and reliable performance throughout the service life of the component. This shackle is intended for use by qualified rigging and maintenance personnel and should always be selected based on the working load limit of the clamp and the requirements of the specific lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct shackle selection) Standard overhead rigging hardware including hooks, slings, chains, and hoist assemblies\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Primary load transfer connection between Renfroe lifting clamps and overhead rigging hardware Steel mill, fabrication shop, and heavy industrial plate lifting applications Replacement shackle for scheduled clamp maintenance and inspection programs Restoration of clamp-to-rigging connection to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement shackle for lifting clamp series Engineered to correct dimensional and load requirements for specified clamp model Primary load-bearing connection subject to tensile stress and wear requiring regular inspection Manufactured to original dimensional and material specifications Compatible with standard overhead rigging hardware within the rated working load limit\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the shackle body, pin, and threads before every use. Remove from service immediately if wear, elongation, cracking, thread damage, or deformation is detected. Never exceed the rated working load limit. Ensure the pin is fully threaded and secured before lifting. Confirm the specific Renfroe clamp model and working load limit before ordering to ensure the correct shackle is selected.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099505905905,"sku":"1-2-ast-1","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-ast-rk","title":"REBUILD KIT FOR 1\/2 TON AST PLATE CLAMP","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Rebuild Kit is a genuine OEM kit containing the replacement components necessary to fully rebuild and restore a Renfroe lifting clamp to its original operating specification and rated working load limit performance. By providing all critical wear parts as a matched set, the rebuild kit simplifies the overhaul process and ensures that every component replaced during the rebuild meets the original dimensional, material, and hardness specifications required for safe operation at the clamp's rated capacity. Using a genuine Renfroe OEM rebuild kit eliminates the risk of introducing non-OEM components that may not meet the exacting requirements of a rated industrial lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eLifting clamps used in regular industrial service accumulate wear across multiple components simultaneously, including the cam, gripping cam, cam pin, bottom roller, spring, and related hardware. In high-production environments such as steel mills, fabrication shops, and plate processing facilities, this wear can progress more rapidly, making scheduled full rebuilds an important part of a comprehensive clamp maintenance program. Performing a complete rebuild at the appropriate interval addresses wear across all critical components at once, restoring the clamp mechanism to its original operating condition and extending the service life of the clamp body before individual component failures can occur.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThis kit is intended for use by qualified maintenance personnel familiar with Renfroe lifting clamp disassembly, inspection, and reassembly procedures. Genuine Renfroe OEM rebuild kit components are manufactured to the original specifications, ensuring correct fit and full compatibility with the existing clamp body and surrounding hardware. The fully rebuilt clamp must be inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel components\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct rebuild kit selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Full rebuild and restoration of Renfroe lifting clamps Scheduled clamp overhaul and heavy maintenance programs Replacement of all critical wear components as a matched OEM set Extension of clamp service life while restoring rated working load limit performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM rebuild kit Contains matched set of critical wear components for complete clamp rebuild Ensures all replaced parts meet original dimensional, material, and hardness specifications Addresses wear across all critical components simultaneously during scheduled overhaul Simplifies the rebuild process and eliminates the risk of non-OEM component substitution\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Confirm the specific Renfroe clamp model, series, and working load limit before ordering to ensure the correct rebuild kit is selected. Rebuild must be performed by a qualified person familiar with Renfroe clamp maintenance procedures. Conduct a full clamp inspection and function test before returning the rebuilt clamp to service.\u003c\/span\u003e\u003cspan class=\"_Container_wxr42_1 _loadingIndicator_1iy4o_52 _ContainerInline_wxr42_15 _ContainerHidden_wxr42_19 _ContainerPaused_wxr42_10\" role=\"status\"\u003e\u003cspan class=\"_Dots_wxr42_10\"\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099505938673,"sku":"1-2-ast-rk","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-astl-5","title":"GRIPPING CAM FOR 1\/2T","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Gripping Cam is a genuine OEM replacement component and the primary load-engaging element within the Renfroe lifting clamp mechanism. The gripping cam is the surface that makes direct contact with the workpiece, biting into the material as the clamp is loaded and generating the clamping force that secures the plate or structural member during lifting. The geometry, surface hardness, and condition of the gripping cam are directly responsible for the quality and reliability of the grip, making it one of the most functionally critical wear components in the entire clamp assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eIn active industrial use, the gripping cam surface is subject to abrasive wear from repeated contact with mill scale, rough plate surfaces, and varying material conditions. Over time, the cam teeth or gripping surface can become worn smooth, chipped, or deformed, reducing the cam's ability to bite into the workpiece and maintain secure clamping force under load. A worn gripping cam represents a direct safety risk, as reduced grip can lead to slippage or load drop during lifting. For this reason, the gripping cam must be inspected at every scheduled maintenance interval and replaced with a genuine Renfroe OEM part as soon as any degradation of the gripping surface is identified.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe gripping cams are manufactured to the original surface hardness, tooth geometry, and dimensional specifications, ensuring that the replacement cam engages the workpiece with the same reliability and holding power as the original equipment. This part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe lifting clamps, and the clamp must be fully inspected and function tested before being returned to service after gripping cam replacement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Hardened alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct gripping cam selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement gripping cam for Renfroe lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of workpiece engagement and clamping force to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement part Primary workpiece contact and load-engaging component within the clamp mechanism Hardened gripping surface designed to bite into plate and structural material under load Worn or damaged gripping cam is a direct safety risk requiring immediate replacement Manufactured to original surface hardness, tooth geometry, and dimensional specifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the gripping cam surface at every scheduled maintenance interval and before each use. Replace immediately if the gripping surface shows wear, smoothing, chipping, or deformation. Confirm the specific Renfroe clamp model and working load limit before ordering. Installation must be performed by a qualified person. Conduct a full clamp inspection and function test before returning to service.\u003c\/span\u003e\u003cspan class=\"_Container_wxr42_1 _loadingIndicator_1iy4o_52 _ContainerInline_wxr42_15 _ContainerHidden_wxr42_19 _ContainerPaused_wxr42_10\" role=\"status\"\u003e\u003cspan class=\"_Dots_wxr42_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099506004209,"sku":"1-2-astl-5","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-astl-8","title":"SHACKLE PIN BUSHING FOR LIFTING CLAMP 1-","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Shackle Pin is a genuine OEM replacement component designed for use with Renfroe lifting shackles. The shackle pin is the threaded or bolt-type fastener that closes the bow of the shackle, completing the load-bearing connection between the shackle and the rigging hardware or clamp attachment point. As the component that maintains the integrity of the shackle connection under load, the pin must be fully seated, correctly threaded, and secured before every lift, and must be maintained in full serviceable condition throughout its service life to ensure the shackle performs within its rated working load limit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eIn regular industrial service, shackle pins are subject to tensile and shear stress, wear at the thread engagement and bearing surfaces, and fatigue from repeated installation, loading, and removal cycles. In demanding environments such as steel mills, fabrication shops, and plate processing facilities, thread wear, surface damage, bending, or corrosion can develop over time, reducing the pin's ability to remain fully secured under load or to carry its share of the working load safely. Any sign of thread damage, wear, bending, corrosion, or deformation requires immediate replacement with a genuine Renfroe OEM shackle pin before the shackle is returned to service.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe shackle pins are manufactured to the original dimensional, thread, and material specifications of the shackle for which they are designed, ensuring correct fit, full thread engagement, and load compatibility with the shackle bow and retaining hardware. This replacement part is intended for use by qualified rigging and maintenance personnel performing authorized servicing or inspection of Renfroe lifting shackles. The complete shackle assembly must be inspected before returning to service after pin replacement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting shackles (confirm specific shackle model and working load limit for correct pin selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement pin for Renfroe lifting shackles Scheduled shackle maintenance and inspection programs Restoration of shackle pin engagement and load-bearing integrity to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement shackle pin Closes the shackle bow and completes the load-bearing connection under working load Subject to tensile and shear stress, thread wear, and fatigue requiring regular inspection Manufactured to original dimensional, thread, and material specifications for correct fit and engagement Must be fully seated and secured before every lift\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the shackle pin threads, body, and bearing surfaces before every use. Replace immediately if thread damage, wear, bending, corrosion, or deformation is detected. Confirm the specific Renfroe shackle model and working load limit before ordering to ensure the correct pin is selected. Ensure the pin is fully threaded and secured with the cotter pin or nut before lifting. Never use a damaged or worn pin.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099506036977,"sku":"1-2-astl-8","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-bd-4","title":"SWIVEL JAW FOR BD-1\/2 TON","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Swivel Jaw is a genuine OEM replacement component designed for use with Renfroe lifting clamps that incorporate a swivel jaw configuration. The swivel jaw provides the gripping interface between the clamp and the workpiece while incorporating a swivel function that allows the jaw to rotate and self-align to the plate surface as clamping force is applied, accommodating minor variations in plate angle, surface irregularity, or rigging geometry without compromising the integrity of the grip. This self-aligning capability ensures consistent jaw contact and reliable clamping force distribution across the gripping surface, contributing to secure and dependable plate retention throughout every lift cycle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eAs a component that contacts the workpiece directly with every lift cycle, the swivel jaw is subject to wear at the gripping surface and teeth, fatigue at the swivel mechanism, and impact damage from the demands of regular industrial use in fabrication shops, steel service centers, steel mills, and plate processing facilities. Wear of the gripping teeth or surface reduces the jaw's ability to grip the plate securely under load, while wear or damage at the swivel mechanism can affect the jaw's ability to self-align correctly, either of which requires immediate replacement with a genuine Renfroe OEM swivel jaw to restore the clamp's gripping performance and self-alignment function to its original specification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe swivel jaws are manufactured to the original dimensional, material, and hardness specifications of the clamp series for which they are designed, ensuring correct fit within the clamp body and reliable gripping and swivel performance at the clamp's rated capacity. This replacement part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe lifting clamps. After replacement, the clamp must be fully inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps incorporating a swivel jaw configuration (confirm specific clamp model, series, and working load limit for correct swivel jaw selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement swivel jaw for Renfroe lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of jaw gripping performance and self-alignment function to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement swivel jaw Swivel function allows jaw to self-align to plate surface under load Accommodates minor variations in plate angle, surface irregularity, or rigging geometry Subject to gripping surface wear and swivel mechanism fatigue requiring regular inspection Manufactured to original dimensional, material, and hardness specifications for correct fit and performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the swivel jaw gripping surface, teeth, and swivel mechanism at every scheduled maintenance interval and before each use. Replace immediately if gripping surface wear, tooth damage, swivel mechanism wear, or deformation is detected. Confirm the specific Renfroe clamp model, series, and working load limit before ordering to ensure the correct swivel jaw is selected. Installation must be performed by a qualified person. Verify correct jaw grip and swivel function before returning the clamp to service.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099506069745,"sku":"1-2-bd-4","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-bd-8","title":"GRIPPING CAM FOR 1\/2 TON BD CLAMP","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Gripping Cam is a genuine OEM replacement component and the primary load-engaging element within the Renfroe lifting clamp mechanism. The gripping cam is the surface that makes direct contact with the workpiece, biting into the material as the clamp is loaded and generating the clamping force that secures the plate or structural member during lifting. The geometry, surface hardness, and condition of the gripping cam are directly responsible for the quality and reliability of the grip, making it one of the most functionally critical wear components in the entire clamp assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eIn active industrial use, the gripping cam surface is subject to abrasive wear from repeated contact with mill scale, rough plate surfaces, and varying material conditions. Over time, the cam teeth or gripping surface can become worn smooth, chipped, or deformed, reducing the cam's ability to bite into the workpiece and maintain secure clamping force under load. A worn gripping cam represents a direct safety risk, as reduced grip can lead to slippage or load drop during lifting. For this reason, the gripping cam must be inspected at every scheduled maintenance interval and replaced with a genuine Renfroe OEM part as soon as any degradation of the gripping surface is identified.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe gripping cams are manufactured to the original surface hardness, tooth geometry, and dimensional specifications, ensuring that the replacement cam engages the workpiece with the same reliability and holding power as the original equipment. This part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe lifting clamps, and the clamp must be fully inspected and function tested before being returned to service after gripping cam replacement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Hardened alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct gripping cam selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement gripping cam for Renfroe lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of workpiece engagement and clamping force to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement part Primary workpiece contact and load-engaging component within the clamp mechanism Hardened gripping surface designed to bite into plate and structural material under load Worn or damaged gripping cam is a direct safety risk requiring immediate replacement Manufactured to original surface hardness, tooth geometry, and dimensional specifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the gripping cam surface at every scheduled maintenance interval and before each use. Replace immediately if the gripping surface shows wear, smoothing, chipping, or deformation. Confirm the specific Renfroe clamp model and working load limit before ordering. Installation must be performed by a qualified person. Conduct a full clamp inspection and function test before returning to service.\u003c\/span\u003e\u003cspan class=\"_Container_wxr42_1 _loadingIndicator_1iy4o_52 _ContainerInline_wxr42_15 _ContainerHidden_wxr42_19 _ContainerPaused_wxr42_10\" role=\"status\"\u003e\u003cspan class=\"_Dots_wxr42_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099506135281,"sku":"1-2-bd-8","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-fr-2","title":"CAM ASSEMBLY","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Cam Assembly is a genuine OEM replacement part for Renfroe lifting clamps, representing one of the most functionally critical components within the clamp mechanism. The cam is the primary element responsible for generating and maintaining clamping force on the workpiece — as the clamp is lifted, the cam rotates and drives the jaw into the material, creating a self-tightening grip that increases proportionally with the applied load. The integrity of this assembly is fundamental to the safe and reliable operation of the clamp.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eWith repeated use in demanding industrial environments, the cam assembly is subject to wear at its contact surfaces, particularly where it interfaces with the jaw, roller, and body of the clamp. A worn or damaged cam can result in reduced clamping force, inconsistent jaw engagement, or failure to hold the rated working load limit. For this reason, the cam assembly should be inspected at every scheduled maintenance interval and replaced with a genuine Renfroe part whenever wear, surface damage, deformation, or cracking is identified.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eRenfroe cam assemblies are manufactured to the same specifications as the original equipment, ensuring correct geometry, surface hardness, and dimensional tolerances are maintained after replacement. This part is intended for installation by qualified personnel familiar with Renfroe clamp disassembly, inspection, and reassembly procedures. Returning a clamp to service with a properly fitted OEM cam assembly restores the clamp to its original rated performance and safety standard.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model and capacity for correct cam assembly selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement cam assembly for Renfroe lifting clamps Scheduled maintenance, inspection, and clamp rebuild programs Restoration of clamping mechanism to OEM specification and rated performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement part Primary load-bearing and clamping force component within the clamp mechanism Self-tightening cam geometry increases grip proportionally with applied load Manufactured to original equipment dimensional, hardness, and tolerance specifications Critical wear component requiring regular inspection and timely replacement\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Confirm the specific Renfroe clamp model and working load limit before ordering to ensure the correct cam assembly is selected. Installation must be performed by a qualified person. Always conduct a full clamp inspection and function test before returning to service after cam replacement.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099506168049,"sku":"1-2-fr-2","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-fr-4","title":"CAM PIN FOR VERTICAL CLAMP 1\/2 TON","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Cam Pin is a genuine OEM replacement component designed for use with Renfroe Vertical series lifting clamps. The cam pin functions as the central pivot point for the cam assembly, holding the cam in correct alignment within the clamp body and allowing it to rotate smoothly as the jaw engages and releases the workpiece. In a vertical lifting clamp, this self-tightening cam action is the primary mechanism by which clamping force is generated and maintained under load, making the cam pin an essential structural element of the overall assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eRepeated lifting cycles, exposure to mill scale, debris, and the mechanical stresses inherent in heavy industrial use place ongoing demands on the cam pin. Over time, wear, bending, surface pitting, or dimensional change can develop, any of which may affect the freedom of cam rotation and the reliability of jaw engagement. Because the cam pin directly influences the clamp's ability to hold its rated working load limit, it must be inspected at every scheduled maintenance interval and replaced with a genuine Renfroe part whenever any degradation is identified.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThis replacement part is designed for installation by qualified maintenance personnel conducting authorized inspection, servicing, or rebuild of Renfroe Vertical lifting clamps. Genuine Renfroe OEM cam pins are manufactured to the original dimensional and material specifications, ensuring correct fit within the clamp body and full compatibility with the cam assembly, bottom roller, and jaw components. Returning the clamp to service with a properly fitted OEM cam pin restores the mechanism to its original rated operating condition.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe Vertical series lifting clamps (confirm specific clamp model and working load limit for correct cam pin selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement cam pin for Renfroe Vertical lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of cam assembly pivot function to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement part Central pivot component for cam assembly in Vertical clamp mechanism Critical to correct cam rotation and self-tightening jaw engagement under load Manufactured to original equipment dimensional and material specifications Supports safe clamp maintenance and extended service life\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Confirm the specific Renfroe Vertical clamp model and working load limit before ordering to ensure the correct cam pin is selected. Installation must be performed by a qualified person. Conduct a full clamp inspection and function test before returning to service after replacement.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099506233585,"sku":"1-2-fr-4","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-fr-5","title":"SWIVEL JAW FR-1\/2 TON ALL OPENINGS","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Swivel Jaw is a genuine OEM replacement component designed for use with Renfroe lifting clamps that incorporate a swivel jaw configuration. The swivel jaw provides the gripping interface between the clamp and the workpiece while incorporating a swivel function that allows the jaw to rotate and self-align to the plate surface as clamping force is applied, accommodating minor variations in plate angle, surface irregularity, or rigging geometry without compromising the integrity of the grip. This self-aligning capability ensures consistent jaw contact and reliable clamping force distribution across the gripping surface, contributing to secure and dependable plate retention throughout every lift cycle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eAs a component that contacts the workpiece directly with every lift cycle, the swivel jaw is subject to wear at the gripping surface and teeth, fatigue at the swivel mechanism, and impact damage from the demands of regular industrial use in fabrication shops, steel service centers, steel mills, and plate processing facilities. Wear of the gripping teeth or surface reduces the jaw's ability to grip the plate securely under load, while wear or damage at the swivel mechanism can affect the jaw's ability to self-align correctly, either of which requires immediate replacement with a genuine Renfroe OEM swivel jaw to restore the clamp's gripping performance and self-alignment function to its original specification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe swivel jaws are manufactured to the original dimensional, material, and hardness specifications of the clamp series for which they are designed, ensuring correct fit within the clamp body and reliable gripping and swivel performance at the clamp's rated capacity. This replacement part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe lifting clamps. After replacement, the clamp must be fully inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps incorporating a swivel jaw configuration (confirm specific clamp model, series, and working load limit for correct swivel jaw selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement swivel jaw for Renfroe lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of jaw gripping performance and self-alignment function to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement swivel jaw Swivel function allows jaw to self-align to plate surface under load Accommodates minor variations in plate angle, surface irregularity, or rigging geometry Subject to gripping surface wear and swivel mechanism fatigue requiring regular inspection Manufactured to original dimensional, material, and hardness specifications for correct fit and performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the swivel jaw gripping surface, teeth, and swivel mechanism at every scheduled maintenance interval and before each use. Replace immediately if gripping surface wear, tooth damage, swivel mechanism wear, or deformation is detected. Confirm the specific Renfroe clamp model, series, and working load limit before ordering to ensure the correct swivel jaw is selected. Installation must be performed by a qualified person. Verify correct jaw grip and swivel function before returning the clamp to service.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099506266353,"sku":"1-2-fr-5","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-fr-6","title":"LOCK SPRING FR6 FOR CLAMP 1\/2 TON","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Lock Spring is a genuine OEM replacement component designed for use with Renfroe lifting clamps that incorporate a locking mechanism. The lock spring provides the tension necessary to keep the locking mechanism engaged in its default locked position, ensuring that the lock does not disengage unintentionally during lifting, transport, or positioning operations. Without a properly functioning lock spring, the locking mechanism may fail to remain engaged under the vibration, movement, and dynamic loading conditions present in an active industrial lifting environment, compromising the security of the clamp and creating a risk of unintended jaw release.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eAs a spring component subject to repeated compression and extension with every lock engagement and release cycle, the lock spring is susceptible to fatigue, loss of tension, permanent set, cracking, or breakage over time. In high-cycle production environments such as steel mills, fabrication shops, and plate processing facilities, this fatigue can accumulate more rapidly, making regular inspection of the lock spring an important part of a comprehensive clamp maintenance program. Any loss of spring tension, visible deformation, or physical damage requires immediate replacement with a genuine Renfroe OEM part to restore the locking mechanism to its original retention force and reliability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe lock springs are manufactured to the original load and dimensional specifications, ensuring correct fit within the clamp body and proper tension on the locking mechanism components. This replacement part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe locking type lifting clamps. After replacement, the clamp must be fully inspected and function tested, including verification that the lock engages and retains correctly under simulated operating conditions, before being returned to service.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel spring\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps incorporating a locking mechanism (confirm specific clamp model, series, and working load limit for correct lock spring selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement lock spring for Renfroe locking type lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of locking mechanism retention force and reliability to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement part Maintains locking mechanism engagement under dynamic lifting and transport conditions Subject to fatigue and loss of tension in high-cycle applications requiring regular inspection Manufactured to original load and dimensional specifications for correct fit and retention force Supports safe clamp maintenance and reliable locking function\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the lock spring at every scheduled maintenance interval and before each use. Replace immediately if loss of tension, deformation, cracking, or breakage is detected. Confirm the specific Renfroe clamp model and working load limit before ordering to ensure the correct lock spring is selected. Installation must be performed by a qualified person. Verify correct lock engagement and retention function before returning the clamp to service.\u003c\/span\u003e\u003cspan class=\"_Container_wxr42_1 _loadingIndicator_1iy4o_52 _ContainerInline_wxr42_15 _ContainerHidden_wxr42_19 _ContainerPaused_wxr42_10\" role=\"status\"\u003e\u003cspan class=\"_Dots_wxr42_10\"\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099506299121,"sku":"1-2-fr-6","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-fr-rk","title":"PLATE CLAMP REPAIR KIT","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Plate Clamp Repair Kit is a genuine OEM kit containing the replacement components necessary to service and restore Renfroe plate clamps to their original operating specification. Repair kits are designed to provide the critical wear parts most commonly requiring replacement during scheduled maintenance or following inspection findings, packaged together as a matched set to simplify the repair process and ensure that all replaced components meet the original dimensional, material, and hardness specifications required for safe operation at the clamp's rated working load limit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eRegular inspection and timely repair of plate clamps is essential to maintaining safe lifting performance in industrial environments. Components such as the cam, gripping cam, cam pin, bottom roller, and spring are subject to progressive wear from repeated lifting cycles, contact with mill scale and rough plate surfaces, and the mechanical stresses of heavy industrial use. Allowing these components to remain in service beyond their serviceable condition can reduce the clamp's clamping force, jaw engagement reliability, and ultimately its ability to hold the rated working load limit safely. The Renfroe Plate Clamp Repair Kit provides the parts needed to address this wear before it reaches a level that compromises safe clamp performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThis kit is intended for use by qualified maintenance personnel familiar with Renfroe plate clamp disassembly, inspection, and reassembly procedures. Using genuine Renfroe OEM repair kit components ensures correct fit and full compatibility with the existing clamp body and surrounding hardware, restoring the clamp mechanism to its original operating condition. The fully repaired clamp must be inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel components\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe plate clamps (confirm specific clamp model, series, and working load limit for correct repair kit selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Scheduled maintenance and repair of Renfroe plate clamps Replacement of critical wear components identified during inspection Restoration of clamp mechanism to OEM specification and rated performance Extension of clamp service life through timely component replacement\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM repair kit Contains matched set of critical wear components for plate clamp servicing Ensures all replaced parts meet original dimensional, material, and hardness specifications Simplifies the repair process with a complete set of commonly replaced components Supports safe clamp maintenance and restoration of rated working load limit performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Confirm the specific Renfroe plate clamp model, series, and working load limit before ordering to ensure the correct repair kit is selected. Repair must be performed by a qualified person familiar with Renfroe clamp maintenance procedures. Conduct a full clamp inspection and function test before returning the repaired clamp to service.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099506331889,"sku":"1-2-fr-rk","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-hr-12","title":"CAM PIN FOR HORIZONTAL CLAMP 1\/2 TON","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Cam Assembly is a genuine OEM replacement part for Renfroe lifting clamps, representing one of the most functionally critical components within the clamp mechanism. The cam is the primary element responsible for generating and maintaining clamping force on the workpiece — as the clamp is lifted, the cam rotates and drives the jaw into the material, creating a self-tightening grip that increases proportionally with the applied load. The integrity of this assembly is fundamental to the safe and reliable operation of the clamp.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eWith repeated use in demanding industrial environments, the cam assembly is subject to wear at its contact surfaces, particularly where it interfaces with the jaw, roller, and body of the clamp. A worn or damaged cam can result in reduced clamping force, inconsistent jaw engagement, or failure to hold the rated working load limit. For this reason, the cam assembly should be inspected at every scheduled maintenance interval and replaced with a genuine Renfroe part whenever wear, surface damage, deformation, or cracking is identified.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eRenfroe cam assemblies are manufactured to the same specifications as the original equipment, ensuring correct geometry, surface hardness, and dimensional tolerances are maintained after replacement. This part is intended for installation by qualified personnel familiar with Renfroe clamp disassembly, inspection, and reassembly procedures. Returning a clamp to service with a properly fitted OEM cam assembly restores the clamp to its original rated performance and safety standard.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model and capacity for correct cam assembly selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement cam assembly for Renfroe lifting clamps Scheduled maintenance, inspection, and clamp rebuild programs Restoration of clamping mechanism to OEM specification and rated performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement part Primary load-bearing and clamping force component within the clamp mechanism Self-tightening cam geometry increases grip proportionally with applied load Manufactured to original equipment dimensional, hardness, and tolerance specifications Critical wear component requiring regular inspection and timely replacement\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Confirm the specific Renfroe clamp model and working load limit before ordering to ensure the correct cam assembly is selected. Installation must be performed by a qualified person. Always conduct a full clamp inspection and function test before returning to service after cam replacement.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099506364657,"sku":"1-2-hr-12","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-j-rk","title":"REBUILD KIT FOR PLATE CLAMP 1\/2 TON","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Rebuild Kit is a genuine OEM kit containing the replacement components necessary to fully rebuild and restore a Renfroe lifting clamp to its original operating specification and rated working load limit performance. By providing all critical wear parts as a matched set, the rebuild kit simplifies the overhaul process and ensures that every component replaced during the rebuild meets the original dimensional, material, and hardness specifications required for safe operation at the clamp's rated capacity. Using a genuine Renfroe OEM rebuild kit eliminates the risk of introducing non-OEM components that may not meet the exacting requirements of a rated industrial lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eLifting clamps used in regular industrial service accumulate wear across multiple components simultaneously, including the cam, gripping cam, cam pin, bottom roller, spring, and related hardware. In high-production environments such as steel mills, fabrication shops, and plate processing facilities, this wear can progress more rapidly, making scheduled full rebuilds an important part of a comprehensive clamp maintenance program. Performing a complete rebuild at the appropriate interval addresses wear across all critical components at once, restoring the clamp mechanism to its original operating condition and extending the service life of the clamp body before individual component failures can occur.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThis kit is intended for use by qualified maintenance personnel familiar with Renfroe lifting clamp disassembly, inspection, and reassembly procedures. Genuine Renfroe OEM rebuild kit components are manufactured to the original specifications, ensuring correct fit and full compatibility with the existing clamp body and surrounding hardware. The fully rebuilt clamp must be inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel components\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct rebuild kit selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Full rebuild and restoration of Renfroe lifting clamps Scheduled clamp overhaul and heavy maintenance programs Replacement of all critical wear components as a matched OEM set Extension of clamp service life while restoring rated working load limit performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM rebuild kit Contains matched set of critical wear components for complete clamp rebuild Ensures all replaced parts meet original dimensional, material, and hardness specifications Addresses wear across all critical components simultaneously during scheduled overhaul Simplifies the rebuild process and eliminates the risk of non-OEM component substitution\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Confirm the specific Renfroe clamp model, series, and working load limit before ordering to ensure the correct rebuild kit is selected. Rebuild must be performed by a qualified person familiar with Renfroe clamp maintenance procedures. Conduct a full clamp inspection and function test before returning the rebuilt clamp to service.\u003c\/span\u003e\u003cspan class=\"_Container_wxr42_1 _loadingIndicator_1iy4o_52 _ContainerInline_wxr42_15 _ContainerHidden_wxr42_19 _ContainerPaused_wxr42_10\" role=\"status\"\u003e\u003cspan class=\"_Dots_wxr42_10\"\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099506397425,"sku":"1-2-j-rk","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-lj-rk","title":"REBUILD KIT FOR PLATE CLAMP 1\/2 TON","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe Rebuild Kit is a genuine OEM kit containing the replacement components necessary to fully rebuild and restore a Renfroe lifting clamp to its original operating specification and rated working load limit performance. By providing all critical wear parts as a matched set, the rebuild kit simplifies the overhaul process and ensures that every component replaced during the rebuild meets the original dimensional, material, and hardness specifications required for safe operation at the clamp's rated capacity. Using a genuine Renfroe OEM rebuild kit eliminates the risk of introducing non-OEM components that may not meet the exacting requirements of a rated industrial lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eLifting clamps used in regular industrial service accumulate wear across multiple components simultaneously, including the cam, gripping cam, cam pin, bottom roller, spring, and related hardware. In high-production environments such as steel mills, fabrication shops, and plate processing facilities, this wear can progress more rapidly, making scheduled full rebuilds an important part of a comprehensive clamp maintenance program. Performing a complete rebuild at the appropriate interval addresses wear across all critical components at once, restoring the clamp mechanism to its original operating condition and extending the service life of the clamp body before individual component failures can occur.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThis kit is intended for use by qualified maintenance personnel familiar with Renfroe lifting clamp disassembly, inspection, and reassembly procedures. Genuine Renfroe OEM rebuild kit components are manufactured to the original specifications, ensuring correct fit and full compatibility with the existing clamp body and surrounding hardware. The fully rebuilt clamp must be inspected and function tested before being returned to service in any lifting application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel components\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct rebuild kit selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Full rebuild and restoration of Renfroe lifting clamps Scheduled clamp overhaul and heavy maintenance programs Replacement of all critical wear components as a matched OEM set Extension of clamp service life while restoring rated working load limit performance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM rebuild kit Contains matched set of critical wear components for complete clamp rebuild Ensures all replaced parts meet original dimensional, material, and hardness specifications Addresses wear across all critical components simultaneously during scheduled overhaul Simplifies the rebuild process and eliminates the risk of non-OEM component substitution\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Confirm the specific Renfroe clamp model, series, and working load limit before ordering to ensure the correct rebuild kit is selected. Rebuild must be performed by a qualified person familiar with Renfroe clamp maintenance procedures. Conduct a full clamp inspection and function test before returning the rebuilt clamp to service.\u003c\/span\u003e\u003cspan class=\"_Container_wxr42_1 _loadingIndicator_1iy4o_52 _ContainerInline_wxr42_15 _ContainerHidden_wxr42_19 _ContainerPaused_wxr42_10\" role=\"status\"\u003e\u003cspan class=\"_Dots_wxr42_10\"\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099506430193,"sku":"1-2-lj-rk","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-rsc-2","title":"HANDLE ASSEMBLY FOR CLAMP RSC 1\/2T","description":"\u003cdiv id=\"sidekick-chat-body\" class=\"Polaris-Scroll _Body_4lym9_41 _BodyLoaded_4lym9_82\"\u003e\n\u003cdiv class=\"_GuidanceSpacer_4lym9_78 _ContentContainer_4lym9_145\"\u003e\n\u003cdiv\u003e\n\u003cdiv role=\"log\"\u003e\n\u003cdiv class=\"_Turn_vmmxx_1\"\u003e\n\u003cdiv class=\"_TurnBlockItem_leymw_1\"\u003e\n\u003cdiv class=\"_TurnBlockItemContent_leymw_11 _TurnBlockItemText_leymw_44\"\u003e\n\u003cdiv class=\"Polaris-InlineStack\"\u003e\n\u003cdiv class=\"_HelpCard_16n9y_6\"\u003e\n\u003carticle class=\"_container_1iy4o_1\"\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThe Renfroe Handle Assembly is a genuine OEM replacement component designed for use with Renfroe lifting clamps. The handle assembly provides the operator interface for opening, positioning, and releasing the clamp during attachment to and detachment from the workpiece. A properly functioning handle assembly is essential to safe and efficient clamp operation, allowing the operator to control jaw movement with confidence and maintain secure handling of the clamp throughout the lifting cycle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eIn regular industrial use, handle assemblies are subject to mechanical wear, bending stress, and impact damage from the demands of an active production environment. A damaged, bent, or worn handle can make it difficult to open or close the clamp jaw reliably, increasing the risk of improper attachment or unintended release during a lifting operation. Handle assemblies should be inspected at every scheduled maintenance interval and replaced with a genuine Renfroe OEM part whenever any damage, deformation, or excessive wear is identified, ensuring the operator retains full and reliable control of the clamp at all times.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eGenuine Renfroe handle assemblies are manufactured to the original dimensional and material specifications, ensuring correct fit within the clamp body and full compatibility with the jaw, cam, and spring components of the clamp mechanism. This replacement part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe lifting clamps. The clamp must be fully inspected and function tested before being returned to service after handle assembly replacement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct handle assembly selection)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Replacement handle assembly for Renfroe lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of operator jaw control and clamp operability to OEM specification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: Genuine Renfroe OEM replacement part Operator interface component for jaw opening, positioning, and release Damaged or deformed handle can compromise safe clamp attachment and release Manufactured to original dimensional and material specifications Supports safe clamp maintenance and reliable operator control\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: Inspect the handle assembly at every scheduled maintenance interval and before each use. Replace immediately if bending, cracking, deformation, or excessive wear is detected. Confirm the specific Renfroe clamp model and working load limit before ordering to ensure the correct handle assembly is selected. Installation must be performed by a qualified person. Conduct a full clamp inspection and function test before returning to service.\u003c\/span\u003e\u003cspan class=\"_Container_wxr42_1 _loadingIndicator_1iy4o_52 _ContainerInline_wxr42_15 _ContainerHidden_wxr42_19 _ContainerPaused_wxr42_10\" role=\"status\"\u003e\u003cspan class=\"_Dots_wxr42_10\"\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003cspan class=\"_Dot_wxr42_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/article\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Polaris-Box\"\u003e\n\u003cdiv class=\"_MessageFooter_6nc5b_79\"\u003e\n\u003cdiv class=\"_FeedbackContainer_1elh1_1\"\u003e\n\u003cdiv class=\"_FeedbackOptions_1elh1_12\"\u003e\n\u003cdiv class=\"_FeedbackOptionsLeft_1elh1_22\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"_FooterScrollToBottomDetector_4lym9_210\"\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099506462961,"sku":"1-2-rsc-2","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"1-2-scp-2","title":"SCP\/A 1\/2 TON ALL OPENINGS","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Renfroe SCP\/A Plate Clamp rated at 1\/2 Ton working load limit is a cam-action vertical lifting clamp from the Renfroe SCP\/A series, distinguished by its ability to accommodate all jaw opening sizes within its rated capacity range. The \"All Openings\" designation indicates that this model is designed to handle a broad range of plate thicknesses without being restricted to a specific jaw opening range, providing versatility across varied material dimensions and reducing the need to maintain multiple clamp models to cover different plate thicknesses within the 1\/2 Ton capacity class.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThe self-tightening cam mechanism engages the workpiece as the load is applied, generating clamping force that increases proportionally with the weight of the load and providing a secure, reliable grip throughout the lift. The SCP\/A series configuration and all-openings capability make this clamp a practical and flexible choice for fabrication shops, steel service centers, and general industrial environments where a variety of plate thicknesses are routinely handled and operational efficiency is improved by minimizing the number of different clamp models required in the tool inventory.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eRenfroe SCP\/A Plate Clamps are built to the quality and durability standards that define the Renfroe product line, with robust alloy steel construction designed to withstand the demands of repeated industrial use. As with all Renfroe lifting clamps, the SCP\/A should be inspected before each use, maintained according to Renfroe's recommended maintenance schedule, and operated only within its rated working load limit and jaw opening range to ensure continued safe and reliable performance throughout its service life.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Alloy steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Vertical lifting and handling of flat steel plate across a range of thicknesses Fabrication shop and steel service center plate handling Applications requiring a single clamp model to cover multiple plate thicknesses within the 1\/2 Ton capacity class General industrial plate handling and positioning\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: 1\/2 Ton working load limit SCP\/A series cam-action vertical plate clamp All openings capability accommodates a broad range of plate thicknesses Self-tightening cam action increases grip proportionally with applied load Reduces the need for multiple clamp models across varied plate thickness inventories Robust alloy steel construction for repeated industrial use\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: This clamp is designed for vertical lifting only. Always verify that the material thickness falls within the clamp's rated jaw opening range before use. Do not exceed the 1\/2 Ton working load limit. Inspect before each use and maintain according to Renfroe's recommended schedule.\u003c\/span\u003e\u003c\/p\u003e","brand":"Renfroe","offers":[{"title":"Default Title","offer_id":46099506495729,"sku":"1-2-scp-2","price":0.0,"currency_code":"CAD","in_stock":false}]},{"product_id":"10s-2-20","title":"FORKLIFT BEAM 2 TON W\/SWIVEL HOOK","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThe Caldwell Forklift Beam with Swivel Hook is a below-the-hook lifting accessory rated at 2 Ton working load limit, engineered to attach to the forks of a forklift and convert the forklift into a capable hook-based lifting and positioning tool. The beam mounts across the forklift forks, providing a stable and secure platform from which the swivel hook suspends the load below, enabling the forklift to lift, transport, and position loads that require a hook-based connection such as machinery, equipment, structural components, and other items fitted with lifting lugs, eye bolts, or shackles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThe swivel hook at the lower end of the beam allows the hook to rotate freely and self-align with the load attachment point, reducing torsional stress on the rigging assembly and accommodating variations in load geometry or attachment point orientation. This swivel capability improves rigging flexibility and allows the load to self-orient naturally during lifting and transport, which is particularly useful when maneuvering loads through tight spaces or positioning equipment during installation and maintenance operations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eAt 2 Ton working load limit, this forklift beam is well suited for a wide range of light to medium industrial lifting tasks commonly encountered in manufacturing, maintenance, construction, and warehouse environments where a crane or hoist is not available but a forklift is on hand. As a Caldwell product, it is built to the dimensional and performance standards associated with the Caldwell line of below-the-hook lifting devices and should be operated in accordance with Caldwell's specifications and applicable lifting device safety standards including ASME B30.20.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Steel alloy\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Forklifts with fork dimensions and rated capacity compatible with the beam mounting requirements Loads within the 2 Ton working load limit fitted with lifting lugs, eye bolts, shackles, or compatible attachment hardware Rigging hardware rated to meet or exceed the 2 Ton working load limit\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Lifting and positioning machinery, equipment, and structural components up to 2 Ton using a forklift Applications where a crane or hoist is unavailable and forklift-based hook lifting is required Equipment installation, maintenance lifts, and material handling in manufacturing and warehouse environments Loads requiring hook-based connection that cannot be handled directly by forklift forks\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: 2 Ton working load limit Mounts to forklift forks to convert forklift into a hook-based lifting tool Swivel hook provides free rotation for self-alignment and load orientation Reduces torsional stress on the rigging assembly Improves rigging flexibility for varied load geometry and attachment point orientation Built to Caldwell's below-the-hook lifting device standards\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: The forklift used with this beam must be rated to handle the combined weight of the beam and the suspended load. Specifications including fork size compatibility, beam mounting details, hook size, and attachment hardware should be confirmed against the official Caldwell product catalog or manufacturer documentation prior to ordering. The forklift beam must only be used within its 2 Ton rated capacity and operated in full accordance with Caldwell's instructions, the forklift manufacturer's guidelines, and applicable lifting device safety standards.\u003c\/span\u003e\u003c\/p\u003e","brand":"Caldwell","offers":[{"title":"Default Title","offer_id":46679799169265,"sku":"10s-2-20","price":580.4,"currency_code":"CAD","in_stock":false}]},{"product_id":"19659","title":"Tractel Bravo Lever Chain Hoist, 5' Lift, 1000 lbs","description":"\u003cp\u003eProduct Description:\u003cbr\u003eThe Tractel Bravo® Lever Chain Hoist is designed for lifting, pulling, positioning, and tensioning loads in demanding industrial and construction environments. Compact, lightweight, and durable, this manual lever hoist delivers reliable performance in tight spaces and harsh working conditions.\u003cbr\u003eEngineered with a rugged steel construction and Grade 80 load chain, the Bravo® hoist provides dependable load control and smooth operation for maintenance, rigging, assembly, and material handling applications.\u003c\/p\u003e\n\u003cp\u003eMaterial:\u003cbr\u003eHigh-tensile alloy steel construction\u003cbr\u003eGrade 80 alloy steel load chain\u003cbr\u003eCorrosion-resistant components\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003cbr\u003eManual lever chain hoist design\u003cbr\u003eAvailable in multiple capacities and lift heights (varies by model)\u003cbr\u003eCompact and lightweight construction for portability\u003cbr\u003e360° swivel hooks with overload opening indicators\u003cbr\u003eAutomatic brake with double ratchet system\u003cbr\u003eFive-sprocket load wheel with closed bearings\u003cbr\u003eFree-wheel safety device activates braking mechanism under load\u003cbr\u003eOperates in temperatures from -40°F to 140°F (-40°C to 60°C)\u003cbr\u003eDesigned for lifting, pulling, and tensioning applications\u003cbr\u003eMeets or exceeds ANSI\/ASME B30.21 standards\u003c\/p\u003e\n\u003cp\u003eUses:\u003cbr\u003eIndustrial lifting and positioning\u003cbr\u003eConstruction and civil engineering applications\u003cbr\u003eMaintenance and repair operations\u003cbr\u003eRigging and load tensioning\u003cbr\u003eWorkshop and job site material handling\u003c\/p\u003e\n\u003cp\u003eKey Features:\u003cbr\u003eCompact design – Ideal for tight work spaces and portable use\u003cbr\u003eHeavy-duty construction – Built for demanding industrial applications\u003cbr\u003eAutomatic braking – Double ratchet system improves load security\u003cbr\u003eSwivel hooks – Allows flexible load positioning and handling\u003cbr\u003eCorrosion-resistant chain – Grade 80 chain designed for durability\u003cbr\u003eSmooth operation – Ergonomic lever design reduces lifting effort\u003c\/p\u003e","brand":"Tractel","offers":[{"title":"Default Title","offer_id":46679800873201,"sku":"19659","price":395.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/9949\/1057\/files\/a109bc97402c553_lg_e6012a27-88cd-4d63-a406-91d8ebf3aebf.jpg?v=1757339850"},{"product_id":"196592","title":"HOIST 1\/4 TONNE LEVER 5 LIFT W\/OVERLOAD","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Tractel Bravo Lever Hoist is a 1\/4 Ton (500 lb \/ 250 kg) capacity manual lever hoist designed for lifting, pulling, tensioning, and load positioning in industrial, construction, and rigging applications. This model includes a built-in overload protection device, which distinguishes it from the standard Bravo 1\/4 Ton and provides an added layer of safety by preventing the hoist from being loaded beyond its rated working load limit. Built to ASME B30.21 standards, the Bravo series delivers reliable performance in a compact, lightweight package suited for use in confined spaces and areas with limited headroom.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eWith a minimum headroom of 9.2 in and a 4 x 12 mm load chain, this hoist is well suited for applications where overhead clearance is restricted. The 5 ft lift configuration is the most compact option in the Bravo 1\/4 Ton range, weighing just 5.6 lb, making it highly portable and easy to deploy across multiple work sites. The ratcheting lever mechanism allows the operator to lift, lower, and hold loads with precise control using minimal effort, while the free-chaining function enables rapid hook positioning without load engagement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eWith a 5 ft lift height, this hoist is suitable for a wide range of general lifting and pulling tasks including equipment installation, load securing, and maintenance operations. The overload protection feature makes this model particularly well suited for applications where load control is critical or where operators may be working in conditions where accidental overloading is a concern. As with all lever hoists, it should be inspected before each use and operated in accordance with ASME B30.21 and applicable rigging regulations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Steel Body and Load Hook 4 x 12 mm Load Chain\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Standard Rigging Hardware Shackles and Hooks Beam Clamps and Trolleys\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Vertical Lifting and Lowering Horizontal Pulling and Tensioning Load Positioning and Securing Equipment Installation and Maintenance Rigging and Construction Applications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: 1\/4 Ton (500 lb \/ 250 kg) Capacity 5 ft Lift Height Chain Size: 4 x 12 mm Minimum Headroom: 9.2 in Built-In Overload Protection ASME B30.21 Certified Compact and Lightweight at 5.6 lb Free-Chaining Function for Rapid Hook Positioning\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: This model includes overload protection. Inspect before each use and operate in accordance with ASME B30.21 and applicable rigging regulations.\u003c\/span\u003e\u003cspan class=\"_Container_wxr42_1 _loadingIndicator_1iy4o_52 _ContainerInline_wxr42_15 _ContainerHidden_wxr42_19 _ContainerPaused_wxr42_10\" role=\"status\" aria-label=\"Loading\"\u003e\u003cspan class=\"_Dots_wxr42_10\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Tractel","offers":[{"title":"Default Title","offer_id":46679800905969,"sku":"196592","price":409.24,"currency_code":"CAD","in_stock":false}]},{"product_id":"19660","title":"LEVER HOIST 1\/2 TON WITH 10 FEET OF LIFT TRACTEL BRAVO","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Tractel Bravo Lever Hoist is a 1\/2 Ton capacity manual lever hoist designed for lifting, pulling, tensioning, and load positioning in industrial, construction, and rigging applications. Built to ASME B30.21 standards and finished in a durable blue powder coat, the Bravo series delivers reliable performance in a compact, lightweight package suited for use in confined spaces and areas with limited headroom. With a minimum headroom of 12 in and a 5 x 15 mm load chain, this hoist is well suited for lighter-duty applications where overhead clearance is restricted.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThe Bravo lever hoist operates via a ratcheting lever mechanism that allows the operator to lift, lower, and hold loads with precise control using minimal effort. The free-chaining function enables rapid hook positioning without load engagement, reducing setup time during rigging operations. At 11.0 lb, the 10 ft lift configuration offers an excellent combination of portability and practicality, making it easy to transport and deploy across multiple work sites.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eWith a 10 ft lift height, this hoist is suitable for a wide range of lighter lifting and pulling tasks including equipment installation, load securing, and maintenance operations. As with all lever hoists, it should be used only within its rated capacity, inspected before each use, and operated in accordance with ASME B30.21 and applicable rigging regulations. This model does not include overload protection; operators must ensure loads do not exceed the rated working load limit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Steel Body and Load Hook Blue Powder Coat Finish 5 x 15 mm Load Chain\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Standard Rigging Hardware Shackles and Hooks Beam Clamps and Trolleys\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Vertical Lifting and Lowering Horizontal Pulling and Tensioning Load Positioning and Securing Equipment Installation and Maintenance Rigging and Construction Applications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: 1\/2 Ton Capacity 10 ft Lift Height Chain Size: 5 x 15 mm Minimum Headroom: 12 in ASME B30.21 Certified Blue Powder Coat Finish Free-Chaining Function for Rapid Hook Positioning\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: This model does not include overload protection. Do not exceed the rated working load limit. Inspect before each use and operate in accordance with ASME B30.21 and applicable rigging regulations.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tractel","offers":[{"title":"Default Title","offer_id":46679800938737,"sku":"19660","price":511.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/9949\/1057\/files\/d78939a885a4002_lg_5ff68727-a80a-4288-938c-fe0638ebd612.jpg?v=1757339849"},{"product_id":"19661","title":"LEVER HOIST 1\/2 TON WITH 15 FEET OF LIFT TRACTEL BRAVO","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Tractel Bravo Lever Hoist is a 1\/2 Ton capacity manual lever hoist designed for lifting, pulling, tensioning, and load positioning in industrial, construction, and rigging applications. Built to ASME B30.21 standards and finished in a durable blue powder coat, the Bravo series delivers reliable performance in a compact, lightweight package suited for use in confined spaces and areas with limited headroom. With a minimum headroom of 12 in and a 5 x 15 mm load chain, this hoist is well suited for lighter-duty applications where overhead clearance is restricted and extended hook travel is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThe Bravo lever hoist operates via a ratcheting lever mechanism that allows the operator to lift, lower, and hold loads with precise control using minimal effort. The free-chaining function enables rapid hook positioning without load engagement, reducing setup time during rigging operations. The 15 ft lift configuration provides extended vertical travel in a lightweight package at just 12.8 lb, making it easy to transport and deploy across multiple work sites where greater hook travel is needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eWith a 15 ft lift height, this hoist is suitable for a wide range of lighter lifting and pulling tasks including equipment installation, load securing, and maintenance operations requiring greater hook travel. As with all lever hoists, it should be used only within its rated capacity, inspected before each use, and operated in accordance with ASME B30.21 and applicable rigging regulations. This model does not include overload protection; operators must ensure loads do not exceed the rated working load limit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Steel Body and Load Hook Blue Powder Coat Finish 5 x 15 mm Load Chain\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Standard Rigging Hardware Shackles and Hooks Beam Clamps and Trolleys\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Vertical Lifting and Lowering Horizontal Pulling and Tensioning Load Positioning and Securing Equipment Installation and Maintenance Rigging and Construction Applications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: 1\/2 Ton Capacity 15 ft Lift Height Chain Size: 5 x 15 mm Minimum Headroom: 12 in ASME B30.21 Certified Blue Powder Coat Finish Free-Chaining Function for Rapid Hook Positioning\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: This model does not include overload protection. Do not exceed the rated working load limit. Inspect before each use and operate in accordance with ASME B30.21 and applicable rigging regulations.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tractel","offers":[{"title":"Default Title","offer_id":46679800971505,"sku":"19661","price":459.36,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/9949\/1057\/files\/a109bc97402c553_lg_8fb25a17-93c1-43d3-bc68-0e2f225902ba.jpg?v=1757339848"},{"product_id":"19669","title":"LEVER HOIST 3\/4 TON WITH 5 FEET OF LIFT TRACTEL BRAVO","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Tractel Bravo Lever Hoist is a 3\/4 Ton capacity manual lever hoist designed for lifting, pulling, tensioning, and load positioning in industrial, construction, and rigging applications. Built to ASME B30.21 standards and finished in a durable blue powder coat, the Bravo series delivers reliable performance in a compact, lightweight package suited for use in confined spaces and areas with limited headroom. With a minimum headroom of 11.9 in and a 6 x 18 mm load chain, this hoist is well suited for applications where overhead clearance is restricted and a lighter-duty capacity is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThe Bravo lever hoist operates via a ratcheting lever mechanism that allows the operator to lift, lower, and hold loads with precise control using minimal effort. The free-chaining function enables rapid hook positioning without load engagement, reducing setup time during rigging operations. The 5 ft lift configuration is the most compact and lightest option in the Bravo 3\/4 Ton range at just 12.8 lb, making it an ideal choice for applications with limited vertical travel requirements and where portability between work sites is a priority.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eWith a 5 ft lift height, this hoist is suitable for lifting and pulling tasks including equipment installation, load securing, and maintenance operations where shorter hook travel is required. As with all lever hoists, it should be used only within its rated capacity, inspected before each use, and operated in accordance with ASME B30.21 and applicable rigging regulations. This model does not include overload protection; operators must ensure loads do not exceed the rated working load limit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Steel Body and Load Hook Blue Powder Coat Finish 6 x 18 mm Load Chain\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Standard Rigging Hardware Shackles and Hooks Beam Clamps and Trolleys\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Vertical Lifting and Lowering Horizontal Pulling and Tensioning Load Positioning and Securing Equipment Installation and Maintenance Rigging and Construction Applications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: 3\/4 Ton Capacity 5 ft Lift Height Chain Size: 6 x 18 mm Minimum Headroom: 11.9 in ASME B30.21 Certified Blue Powder Coat Finish Free-Chaining Function for Rapid Hook Positioning\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: This model does not include overload protection. Do not exceed the rated working load limit. Inspect before each use and operate in accordance with ASME B30.21 and applicable rigging regulations.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tractel","offers":[{"title":"Default Title","offer_id":46679801004273,"sku":"19669","price":456.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/9949\/1057\/files\/a109bc97402c553_lg_8a556b59-5452-4f6a-a0ad-aa629901c77e.jpg?v=1757339847"},{"product_id":"19670","title":"LEVER HOIST 3\/4 TON WITH 10 FEET OF LIFT TRACTEL BRAVO","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Tractel Bravo Lever Hoist is a 3\/4 Ton capacity manual lever hoist designed for lifting, pulling, tensioning, and load positioning in industrial, construction, and rigging applications. Built to ASME B30.21 standards and finished in a durable blue powder coat, the Bravo series delivers reliable performance in a compact, lightweight package suited for use in confined spaces and areas with limited headroom. With a minimum headroom of 11.9 in and a 6 x 18 mm load chain, this hoist is well suited for applications where overhead clearance is restricted and a lighter-duty capacity is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThe Bravo lever hoist operates via a ratcheting lever mechanism that allows the operator to lift, lower, and hold loads with precise control using minimal effort. The free-chaining function enables rapid hook positioning without load engagement, reducing setup time during rigging operations. At 15.4 lb, the 10 ft lift configuration is one of the most portable options in the Bravo 3\/4 Ton range, making it easy to transport and deploy across multiple work sites where shorter lift travel is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eWith a 10 ft lift height, this hoist is suitable for a wide range of lifting and pulling tasks including equipment installation, load securing, and maintenance operations. As with all lever hoists, it should be used only within its rated capacity, inspected before each use, and operated in accordance with ASME B30.21 and applicable rigging regulations. This model does not include overload protection; operators must ensure loads do not exceed the rated working load limit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Steel Body and Load Hook Blue Powder Coat Finish 6 x 18 mm Load Chain\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Standard Rigging Hardware Shackles and Hooks Beam Clamps and Trolleys\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Vertical Lifting and Lowering Horizontal Pulling and Tensioning Load Positioning and Securing Equipment Installation and Maintenance Rigging and Construction Applications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: 3\/4 Ton Capacity 10 ft Lift Height Chain Size: 6 x 18 mm Minimum Headroom: 11.9 in ASME B30.21 Certified Blue Powder Coat Finish Free-Chaining Function for Rapid Hook Positioning\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: This model does not include overload protection. Do not exceed the rated working load limit. Inspect before each use and operate in accordance with ASME B30.21 and applicable rigging regulations.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tractel","offers":[{"title":"Default Title","offer_id":46679801102577,"sku":"19670","price":582.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/9949\/1057\/files\/a109bc97402c553_lg.jpg?v=1757339847"},{"product_id":"19671","title":"LEVER HOIST 3\/4 TON WITH 15 FEET OF LIFT TRACTEL BRAVO","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Tractel Bravo Lever Hoist is a 3\/4 Ton capacity manual lever hoist designed for lifting, pulling, tensioning, and load positioning in industrial, construction, and rigging applications. Built to ASME B30.21 standards and finished in a durable blue powder coat, the Bravo series delivers reliable performance in a compact, lightweight package suited for use in confined spaces and areas with limited headroom. With a minimum headroom of 11.9 in and a 6 x 18 mm load chain, this hoist is well suited for applications where overhead clearance is restricted and a lighter-duty capacity is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThe Bravo lever hoist operates via a ratcheting lever mechanism that allows the operator to lift, lower, and hold loads with precise control using minimal effort. The free-chaining function enables rapid hook positioning without load engagement, reducing setup time during rigging operations. The 15 ft lift configuration provides extended vertical travel in a lightweight package, with the hoist weighing just 18.0 lb, making it easy to transport and deploy across multiple work sites.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eWith a 15 ft lift height, this hoist is suitable for a wide range of lifting and pulling tasks including equipment installation, load securing, and maintenance operations requiring greater hook travel. As with all lever hoists, it should be used only within its rated capacity, inspected before each use, and operated in accordance with ASME B30.21 and applicable rigging regulations. This model does not include overload protection; operators must ensure loads do not exceed the rated working load limit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Steel Body and Load Hook Blue Powder Coat Finish 6 x 18 mm Load Chain\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Standard Rigging Hardware Shackles and Hooks Beam Clamps and Trolleys\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Vertical Lifting and Lowering Horizontal Pulling and Tensioning Load Positioning and Securing Equipment Installation and Maintenance Rigging and Construction Applications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: 3\/4 Ton Capacity 15 ft Lift Height Chain Size: 6 x 18 mm Minimum Headroom: 11.9 in ASME B30.21 Certified Blue Powder Coat Finish Free-Chaining Function for Rapid Hook Positioning\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: This model does not include overload protection. Do not exceed the rated working load limit. Inspect before each use and operate in accordance with ASME B30.21 and applicable rigging regulations.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tractel","offers":[{"title":"Default Title","offer_id":46679801135345,"sku":"19671","price":464.97,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/9949\/1057\/files\/a109bc97402c553_lg_bd15a9eb-7d28-409f-bbab-19233c789a49.jpg?v=1757339846"},{"product_id":"19679","title":"LEVER HOIST 1-1\/2 TON WITH 5 FT OF LIFT TRACTEL BRAVO","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Tractel Bravo Lever Hoist is a 1-1\/2 Ton capacity manual lever hoist designed for lifting, pulling, tensioning, and load positioning in industrial, construction, and rigging applications. Built to ASME B30.21 standards and finished in a durable blue powder coat, the Bravo series delivers reliable performance across a wide range of working environments. With a minimum headroom of 14.6 in and a 7 x 21 mm load chain, this hoist provides a balance of capacity and compact design suited for applications where overhead clearance is a consideration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThe Bravo lever hoist operates via a ratcheting lever mechanism that allows the operator to lift, lower, and hold loads with precise control using minimal effort. The free-chaining function enables rapid hook positioning without load engagement, reducing setup time during rigging operations. The 5 ft lift configuration is the most compact option in the 1-1\/2 Ton Bravo range, weighing just 20.7 lb, making it an ideal choice for applications with limited vertical travel requirements and where portability and ease of transport between work sites is a priority.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eWith a 5 ft lift height, this hoist is suitable for lifting and pulling tasks including equipment installation, load securing, and maintenance operations where shorter hook travel is required. As with all lever hoists, it should be used only within its rated capacity, inspected before each use, and operated in accordance with ASME B30.21 and applicable rigging regulations. This model does not include overload protection; operators must ensure loads do not exceed the rated working load limit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Steel Body and Load Hook Blue Powder Coat Finish 7 x 21 mm Load Chain\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Standard Rigging Hardware Shackles and Hooks Beam Clamps and Trolleys\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Vertical Lifting and Lowering Horizontal Pulling and Tensioning Load Positioning and Securing Equipment Installation and Maintenance Rigging and Construction Applications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: 1-1\/2 Ton Capacity 5 ft Lift Height Chain Size: 7 x 21 mm Minimum Headroom: 14.6 in ASME B30.21 Certified Blue Powder Coat Finish Free-Chaining Function for Rapid Hook Positioning\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: This model does not include overload protection. Do not exceed the rated working load limit. Inspect before each use and operate in accordance with ASME B30.21 and applicable rigging regulations.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tractel","offers":[{"title":"Default Title","offer_id":46679801168113,"sku":"19679","price":705.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/9949\/1057\/files\/a109bc97402c553_lg_9e960b1f-bb7d-4aaa-a00a-b11fa7e571e5.jpg?v=1757339846"},{"product_id":"19680","title":"LEVER HOIST 1-1\/2 TON WITH 10 FEET OF LIFT TRACTEL BRAVO","description":"\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eProduct Description: The Tractel Bravo Lever Hoist is a 1-1\/2 Ton capacity manual lever hoist designed for lifting, pulling, tensioning, and load positioning in industrial, construction, and rigging applications. Built to ASME B30.21 standards and finished in a durable blue powder coat, the Bravo series delivers reliable performance across a wide range of working environments. With a minimum headroom of 14.6 in and a 7 x 21 mm load chain, this hoist provides a balance of capacity and compact design suited for applications where overhead clearance is a consideration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eThe Bravo lever hoist operates via a ratcheting lever mechanism that allows the operator to lift, lower, and hold loads with precise control using minimal effort. The free-chaining function enables rapid hook positioning without load engagement, reducing setup time during rigging operations. At 24.3 lb, the 10 ft lift configuration offers a practical combination of capacity and portability, making it well suited for field use across multiple work sites where shorter lift travel is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eWith a 10 ft lift height, this hoist is suitable for a wide range of lifting and pulling tasks including equipment installation, load securing, and maintenance operations. As with all lever hoists, it should be used only within its rated capacity, inspected before each use, and operated in accordance with ASME B30.21 and applicable rigging regulations. This model does not include overload protection; operators must ensure loads do not exceed the rated working load limit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eMaterial: Steel Body and Load Hook Blue Powder Coat Finish 7 x 21 mm Load Chain\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eCompatible With: Standard Rigging Hardware Shackles and Hooks Beam Clamps and Trolleys\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eUses: Vertical Lifting and Lowering Horizontal Pulling and Tensioning Load Positioning and Securing Equipment Installation and Maintenance Rigging and Construction Applications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eKey Features: 1-1\/2 Ton Capacity 10 ft Lift Height Chain Size: 7 x 21 mm Minimum Headroom: 14.6 in ASME B30.21 Certified Blue Powder Coat Finish Free-Chaining Function for Rapid Hook Positioning\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_1iy4o_107\"\u003e\u003cspan\u003eNote: This model does not include overload protection. Do not exceed the rated working load limit. Inspect before each use and operate in accordance with ASME B30.21 and applicable rigging regulations.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tractel","offers":[{"title":"Default Title","offer_id":46679801233649,"sku":"19680","price":761.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/9949\/1057\/files\/a109bc97402c553_lg_073bcc5f-2916-4308-9152-31259c16bb8b.jpg?v=1757339845"}],"url":"https:\/\/www.herculeslifting.com\/collections\/material-handling.oembed?page=95","provider":"Hercules Lifting","version":"1.0","type":"link"}