GRIPPING CAM FOR 1TON BD CLAMP

Product Description

Product Description: The Renfroe Gripping Cam is a genuine OEM replacement component and the primary load-engaging element within the Renfroe lifting clamp mechanism. The gripping cam is the surface that makes direct contact with the workpiece, biting into the material as the clamp is loaded and generating the clamping force that secures the plate or structural member during lifting. The geometry, surface hardness, and condition of the gripping cam are directly responsible for the quality and reliability of the grip, making it one of the most functionally critical wear components in the entire clamp assembly.

In active industrial use, the gripping cam surface is subject to abrasive wear from repeated contact with mill scale, rough plate surfaces, and varying material conditions. Over time, the cam teeth or gripping surface can become worn smooth, chipped, or deformed, reducing the cam's ability to bite into the workpiece and maintain secure clamping force under load. A worn gripping cam represents a direct safety risk, as reduced grip can lead to slippage or load drop during lifting. For this reason, the gripping cam must be inspected at every scheduled maintenance interval and replaced with a genuine Renfroe OEM part as soon as any degradation of the gripping surface is identified.

Genuine Renfroe gripping cams are manufactured to the original surface hardness, tooth geometry, and dimensional specifications, ensuring that the replacement cam engages the workpiece with the same reliability and holding power as the original equipment. This part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe lifting clamps, and the clamp must be fully inspected and function tested before being returned to service after gripping cam replacement.

Material: Hardened alloy steel

Compatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct gripping cam selection)

Uses: Replacement gripping cam for Renfroe lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of workpiece engagement and clamping force to OEM specification

Key Features: Genuine Renfroe OEM replacement part Primary workpiece contact and load-engaging component within the clamp mechanism Hardened gripping surface designed to bite into plate and structural material under load Worn or damaged gripping cam is a direct safety risk requiring immediate replacement Manufactured to original surface hardness, tooth geometry, and dimensional specifications

Note: Inspect the gripping cam surface at every scheduled maintenance interval and before each use. Replace immediately if the gripping surface shows wear, smoothing, chipping, or deformation. Confirm the specific Renfroe clamp model and working load limit before ordering. Installation must be performed by a qualified person. Conduct a full clamp inspection and function test before returning to service.