CAM ASSEMBLY FOR VERTICAL CLAMP 3 TON

Product Description

Product Description: The Renfroe Cam Assembly is a genuine OEM replacement part for Renfroe lifting clamps, representing one of the most functionally critical components within the clamp mechanism. The cam is the primary element responsible for generating and maintaining clamping force on the workpiece — as the clamp is lifted, the cam rotates and drives the jaw into the material, creating a self-tightening grip that increases proportionally with the applied load. The integrity of this assembly is fundamental to the safe and reliable operation of the clamp.

With repeated use in demanding industrial environments, the cam assembly is subject to wear at its contact surfaces, particularly where it interfaces with the jaw, roller, and body of the clamp. A worn or damaged cam can result in reduced clamping force, inconsistent jaw engagement, or failure to hold the rated working load limit. For this reason, the cam assembly should be inspected at every scheduled maintenance interval and replaced with a genuine Renfroe part whenever wear, surface damage, deformation, or cracking is identified.

Renfroe cam assemblies are manufactured to the same specifications as the original equipment, ensuring correct geometry, surface hardness, and dimensional tolerances are maintained after replacement. This part is intended for installation by qualified personnel familiar with Renfroe clamp disassembly, inspection, and reassembly procedures. Returning a clamp to service with a properly fitted OEM cam assembly restores the clamp to its original rated performance and safety standard.

Material: Alloy steel

Compatible With: Renfroe lifting clamps (confirm specific clamp model and capacity for correct cam assembly selection)

Uses: Replacement cam assembly for Renfroe lifting clamps Scheduled maintenance, inspection, and clamp rebuild programs Restoration of clamping mechanism to OEM specification and rated performance

Key Features: Genuine Renfroe OEM replacement part Primary load-bearing and clamping force component within the clamp mechanism Self-tightening cam geometry increases grip proportionally with applied load Manufactured to original equipment dimensional, hardness, and tolerance specifications Critical wear component requiring regular inspection and timely replacement

Note: Confirm the specific Renfroe clamp model and working load limit before ordering to ensure the correct cam assembly is selected. Installation must be performed by a qualified person. Always conduct a full clamp inspection and function test before returning to service after cam replacement.