Coffing LSB-B Ratchet Lever Hoist - 3 Ton, 10 ft Lift

Product Description

Coffing LSB-B ratchet lever hoists are metric-rated manual chain hoists designed for lifting, lowering, pulling, tensioning, and positioning loads. The listed configurations include a 3/4 Ton model with a 15 ft Lift and a 3 Ton model with a 10 ft Lift. Their compact, portable construction is suitable for construction, commercial rigging, maintenance, fabrication, equipment installation, and industrial material-handling applications.

An impact-resistant stamped steel housing protects the internal operating components while keeping the hoist lightweight and easy to rig. Double-reduction gearing and a short cushioned-grip handle reduce operating effort, with approximately 46 lb of handle pull required for the 3/4 Ton model and 75 lb for the 3 Ton model. The handle rotates through 360 degrees, allowing the operator to reposition it when nearby machinery or structural obstructions restrict the available operating arc.

A one-handed free-chaining mechanism permits rapid take-up and positioning of unloaded slack chain before the load is engaged. The enclosed screw-and-disc load brake helps keep its operating surfaces clean and dry while providing positive load holding and controlled positioning. Through-hardened load chain supports repeated industrial service, while hook latches help retain properly seated rigging. Both listed models use single-strand load-chain reeving.

Material:
Impact-resistant stamped steel housing
Through-hardened steel load chain
Steel gearing and internal operating components
Cushioned operating-handle grip
Hooks with retaining latches

Compatible With:
Coffing LSB-B replacement load chain matched to the hoist capacity and lifting height
Optional field-installed Coffing LSB-B load limiter
Optional shipyard hook for the compatible 3 Ton model
Properly rated overhead suspension and anchoring points

Uses:
Lifting and lowering industrial loads
Pulling and positioning machinery
Tensioning and alignment work
Construction and commercial rigging
Plant and facility maintenance
Fabrication and equipment installation
Material handling in confined or obstructed work areas

Key Features:
Compact and lightweight construction
Metric-rated design
Low-effort double-reduction gearing
360-degree rotating cushioned handle
One-handed unloaded free chaining
Enclosed screw-and-disc load brake
Through-hardened load chain
Positive hook-latch engagement
Single-strand load-chain reeving
Optional field-installed load limiter