LIFTING SHACKLE FOR LIFTING CLAMP 1-1/2

Product Description

The Renfroe Lifting Shackle for Lifting Clamp is a genuine OEM replacement shackle designed for use with Renfroe lifting clamps as the primary connection point between the clamp and the overhead rigging assembly. This shackle is engineered to the dimensional and load requirements of the Renfroe lifting clamp series for which it is specified, ensuring correct fit at the clamp bail or connection point and proper load alignment through the rigging system. As a primary load path component, the shackle transfers the full working load from the clamp to the hoist, hook, sling, or chain above it, and its structural integrity is fundamental to the safety of every lift in which it is used.

Lifting shackles used in regular industrial service are subject to tensile stress, wear at the pin and bow contact surfaces, and cumulative fatigue from repeated loading and unloading cycles. In demanding environments such as steel mills, fabrication shops, and plate processing facilities, this wear can progress more rapidly, making consistent pre-use inspection an essential part of safe rigging practice. Elongation of the bow, wear at the hook or rigging contact point, thread damage on the pin, surface cracking, or any visible deformation are all conditions that require the shackle to be immediately removed from service and replaced with a genuine Renfroe OEM part before the clamp is used again.

Genuine Renfroe lifting shackles are manufactured to the original dimensional and material specifications of the clamp series for which they are designed, ensuring correct fit, full load compatibility, and reliable performance throughout the service life of the component. This shackle is intended for use by qualified rigging and maintenance personnel and should always be selected based on the working load limit of the clamp and the requirements of the specific lifting application.

Material: Alloy steel

Compatible With: Renfroe lifting clamps (confirm specific clamp model, series, and working load limit for correct shackle selection) Standard overhead rigging hardware including hooks, slings, chains, and hoist assemblies

Uses: Primary load transfer connection between Renfroe lifting clamps and overhead rigging hardware Steel mill, fabrication shop, and heavy industrial plate lifting applications Replacement shackle for scheduled clamp maintenance and inspection programs Restoration of clamp-to-rigging connection to OEM specification

Key Features: Genuine Renfroe OEM replacement shackle for lifting clamp series Engineered to correct dimensional and load requirements for specified clamp model Primary load-bearing connection subject to tensile stress and wear requiring regular inspection Manufactured to original dimensional and material specifications Compatible with standard overhead rigging hardware within the rated working load limit

Note: Inspect the shackle body, pin, and threads before every use. Remove from service immediately if wear, elongation, cracking, thread damage, or deformation is detected. Never exceed the rated working load limit. Ensure the pin is fully threaded and secured before lifting. Confirm the specific Renfroe clamp model and working load limit before ordering to ensure the correct shackle is selected.