SWIVEL 1 TON JAW FOR RENFROE JA

Product Description

The Renfroe JA Swivel Jaw rated at 1 Ton working load limit is a genuine OEM replacement component designed specifically for use with Renfroe JA series lifting clamps. The swivel jaw provides the gripping interface between the clamp and the workpiece while incorporating a swivel function that allows the jaw to rotate and self-align to the plate surface as clamping force is applied, accommodating minor variations in plate angle, surface irregularity, or rigging geometry without compromising the integrity of the grip. This self-aligning capability is particularly valuable in applications where the plate surface may not be perfectly perpendicular to the clamp body, ensuring consistent jaw contact and reliable clamping force distribution across the gripping surface.

As a component that contacts the workpiece directly with every lift cycle, the swivel jaw is subject to wear at the gripping surface, fatigue at the swivel mechanism, and impact damage from the demands of regular industrial use in fabrication shops, steel service centers, steel mills, and plate processing facilities. Wear of the gripping teeth or surface reduces the jaw's ability to grip the plate securely, while wear or damage at the swivel mechanism can affect the jaw's ability to self-align correctly under load. Either condition requires immediate replacement with a genuine Renfroe OEM swivel jaw to restore the clamp's gripping performance and self-alignment function to its original specification.

Genuine Renfroe JA series swivel jaws are manufactured to the original dimensional, material, and hardness specifications, ensuring correct fit within the JA clamp body and reliable gripping and swivel performance at the 1 Ton rated capacity. This replacement part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe JA series lifting clamps. After replacement, the clamp must be fully inspected and function tested before being returned to service in any lifting application.

Material: Alloy steel

Compatible With: Renfroe JA series lifting clamps - 1 Ton working load limit (confirm specific JA clamp model for correct swivel jaw selection)

Uses: Replacement swivel jaw for Renfroe JA series 1 Ton lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of jaw gripping performance and self-alignment function to OEM specification

Key Features: Genuine Renfroe OEM replacement swivel jaw for JA series 1 Ton lifting clamps Swivel function allows jaw to self-align to plate surface under load Accommodates minor variations in plate angle, surface irregularity, or rigging geometry Subject to gripping surface wear and swivel mechanism fatigue requiring regular inspection Manufactured to original dimensional, material, and hardness specifications

Note: Inspect the swivel jaw gripping surface and swivel mechanism at every scheduled maintenance interval and before each use. Replace immediately if gripping surface wear, tooth damage, swivel mechanism wear, or deformation is detected. Confirm the specific Renfroe JA clamp model before ordering to ensure the correct 1 Ton swivel jaw is selected. Installation must be performed by a qualified person. Verify correct jaw grip and swivel function before returning the clamp to service.