National WIRELOCK Socket Compound Booster Pack - 2000 cc

Product Description

The National W416-7B WIRELOCK Socket Compound Booster Pak is a supplemental liquid resin compound designed to extend the volume of a primary W416-7 WIRELOCK Socket Compound Kit when additional compound is required to completely fill a large or deep spelter socket. Supplied in a 2000 cc container, this large-format Booster Pak provides the maximum supplemental compound volume available in the W416-7B series, making it the preferred choice for high-output wire rope fabrication environments, very large-diameter socket terminations, or production runs where multiple sockets require top-up volume in a single session. As with the primary W416-7 compound, the Booster Pak is a two-component resin system that cures to form a high-strength, rigid termination when properly mixed and poured into a prepared socket.

The W416-7B compound is supplied in liquid form and achieves an initial set in approximately 20 minutes under standard conditions, consistent with the cure profile of the primary W416-7 kit. The cured compound exhibits a specific gravity of 1.73 and a tensile strength of 16.15 N/sq-mm, delivering the same mechanical performance as the base compound. The compound has a flash point of 89°F and a viscosity of 3 to 4 poise, and is identifiable by its opaque green/mustard color in the uncured state. The operating temperature range of -65°F to 240°F ensures compatibility with the full range of environmental conditions encountered in industrial, offshore, and heavy lifting applications.

The W416-7B Booster Pak is intended for use in conjunction with the W416-7 primary kit and should not be used as a standalone socketing compound. Proper socket preparation — including brooming, cleaning, and degreasing of the wire rope end — is required prior to pouring, and the Booster Pak compound must be mixed and poured in accordance with the manufacturer's instructions to ensure compatibility with the primary compound and full termination efficiency.

Material: Two-component liquid resin compound Opaque green/mustard color (uncured)

Compatible With: National W416-7 WIRELOCK Socket Compound Kit Open spelter sockets Closed spelter sockets Large-diameter wire rope assemblies requiring high-volume supplemental compound

Uses: High-volume supplemental compound for large or deep spelter socket terminations Large-diameter wire rope socketing production runs Offshore and marine wire rope fabrication Heavy lifting and crane wire rope terminations requiring maximum socket fill volume Multi-socket production sessions requiring supplemental top-up compound

Key Features: 2000 cc container size Liquid form for easy pouring and socket filling Approximately 20 min initial set time Opaque green/mustard color for visual identification Operating temperature range: -65°F to 240°F Specific gravity: 1.73 Flash point: 89°F Viscosity: 3 to 4 poise Tensile strength: 16.15 N/sq-mm Designed for use with National W416-7 primary compound kit Consistent cure profile and mechanical performance with W416-7 base compound

Note: The W416-7B Booster Pak is a supplemental product intended for use with the W416-7 primary kit only. Do not use as a standalone socketing compound. Follow the manufacturer's mixing and installation instructions precisely to ensure compatibility and full termination efficiency.