3M Protecta Web Lanyard Twin Leg E4 - 6 ft

Product Description

The 3M Protecta Web Lanyard Twin Leg E4 is a personal fall arrest lanyard engineered to provide 100% tie-off capability during movement between anchor points at height. The twin leg design features two independent lanyard legs, each fitted with a snap hook, allowing the worker to connect one leg to the next anchor point before disconnecting the first leg from the previous anchor point, ensuring that the worker is always connected to at least one anchor point throughout the transition and eliminating the risk of an unprotected fall during anchor-to-anchor movement.

The E4 designation identifies this lanyard within the 3M Protecta product series, indicating the specific energy absorber and connector configuration engineered to meet the performance requirements of applicable fall protection standards. The integrated energy absorber deploys during a fall event to reduce the peak arrest force transmitted to the worker's body and harness, limiting the forces applied to the worker's spine, harness attachment points, and anchor system to within the limits specified by applicable fall protection standards.

At 6 ft per leg, this twin leg lanyard is suited for use in construction, industrial maintenance, steel erection, scaffolding, and other work at height applications where continuous connection to the fall protection system is required during movement between work positions or anchor points. As a 3M Protecta product, this lanyard is engineered to the performance and quality standards of the Protecta fall protection line and must be used as part of a complete personal fall arrest system including a compatible full-body harness and anchor points rated in accordance with applicable fall protection regulations.

Material: Polyester webbing with integrated energy absorber and steel or alloy snap hooks

Compatible With: Compatible 3M Protecta and other full-body harnesses with a dorsal fall arrest D-ring Anchor points rated for fall arrest loads in accordance with applicable fall protection standards Complete personal fall arrest systems used in accordance with applicable fall protection regulations

Uses: 100% tie-off fall protection during movement between anchor points on construction sites and industrial facilities Steel erection, roofing, scaffolding, and elevated work platform applications requiring continuous fall protection Work at height applications where the worker must transition between anchor points without disconnecting from the fall protection system Applications requiring energy-absorbing twin leg fall arrest at 6 ft per leg

Key Features: Twin leg design provides 100% tie-off capability during anchor-to-anchor transitions Integrated energy absorber reduces peak arrest force during fall arrest to protect the worker E4 designation identifies specific energy absorber and connector configuration within the 3M Protecta series 6 ft per leg length for construction, maintenance, and industrial work at height Part of the 3M Protecta fall protection product line

Note: The total fall clearance below the worker must be calculated before use to ensure sufficient clearance exists for the energy absorber deployment length, lanyard length, harness stretch, and worker height combined. Specifications including snap hook type, energy absorber deployment length, compatible harness D-ring sizes, and applicable standards compliance should be confirmed against the official 3M Protecta product documentation prior to ordering. All fall protection equipment must be selected, used, inspected, and maintained in accordance with the manufacturer's instructions and applicable fall protection regulations.