ShopAir Air Chain Hoist - 500 lb Single Reeve Hook Suspension 10 ft Lift

Product Description

Product Description:
The CM ShopAir Air Chain Hoist is a compact pneumatic lifting solution designed for assembly, manufacturing, workstation and production-line applications. These hook-suspension models use a single-reeved load chain and provide a 10 ft Lift. The 300 lb models deliver a 31 FPM lifting speed and require approximately 36 SCFM, while the 500 lb models deliver a 21 FPM lifting speed and require approximately 38 SCFM. All four models operate at a normal air pressure of 90 PSI.

A variable-flow, two-lever pendant throttle provides responsive lifting and lowering control for precise positioning of suspended loads. The industrial-duty air motor supports demanding repetitive service, while durable reduction gearing and a lifetime-lubricated gear train contribute to dependable operation. A factory-set Protector overload device helps prevent the hoist from lifting loads that exceed its intended operating range.

The single-reeved configuration connects the hardened alloy steel load chain directly between the liftwheel and lower hook. A 10-pocket oblique-lay liftwheel promotes smooth chain engagement and helps reduce chain wear. The rugged cast aluminum alloy frame is protected by a durable epoxy powder-coated finish, while hardened forged steel latch hooks provide secure load attachment. The lower hook rotates 360° to help align the load and reduce twisting during positioning.

Material:
Cast aluminum alloy hoist frame
Hardened alloy steel load chain
Hardened forged steel upper hook
Hardened forged steel rotating lower hook
Epoxy powder-coated exterior finish

Compatible With:
Filtered and lubricated compressed-air systems
Air supplies capable of providing 90 PSI
1/2 in ID air-supply hose
Properly rated overhead hook-suspension points
CM Series 632 manual push trolleys
Optional CM ShopAir chain containers

Uses:
Assembly and manufacturing operations
Workstation lifting
Production-line material handling
Controlled positioning of suspended loads
Maintenance and repair operations
Commercial and industrial lifting
Applications where pneumatic power is preferred

Key Features:
Available in 300 lb and 500 lb capacities
10 ft Lift
Single-reeved load-chain configuration
Hook suspension
Pendant throttle control
31 FPM lifting speed on 300 lb models
21 FPM lifting speed on 500 lb models
Approximately 36 SCFM air requirement on 300 lb models
Approximately 38 SCFM air requirement on 500 lb models
90 PSI normal operating pressure
10-7/8 in minimum between hooks
1 in hook opening
Variable-flow two-lever pendant
Precise load positioning
Industrial-duty air motor
Protector overload device
10-pocket oblique-lay liftwheel
Durable reduction gearing
Lifetime-lubricated gear train
Rugged cast aluminum alloy frame
Epoxy powder-coated finish
Hardened forged steel latch hooks
360° rotating lower hook
Threaded external exhaust for routing discharged air away from the work area

Note:
The two 300 lb rows and the two 500 lb rows contain the same visible product specifications. Confirm whether the different handles identify an accessory or configuration difference before adding distinctions that are not shown in the spreadsheet.