CLAMP 3 TONNE LIFTING VERTICAL 0-1.56 JA
Please note: images may not be exact representations. Always refer to manufacturer's specifications.
CLAMP 3 TONNE LIFTING VERTICAL 0-1.56 JA
$1,674.00
IP10 - 3t Vertical Lifting Clamp w/Straight Eye 0-1 9/16" Jaw
• For vertical lifting, turning and transfer
• Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual and test certificate included with each clamp .
• IP10 - Standard clamp for materials with a surface hardness to 363HV10 (345 HB).
• Full 180° turning range for material transfer, turning or moving.
• Lock open, lock closed ability with latch for pretension on material and then release of material.
• Maintenance and repair kits are available.
• Minimum WLL is 10% of maximum WLL.
• For plate surface hardness to 279HV10, only 5% minimum WLL is needed.
• Design Factor based on EN 13155 and ASME B30.20.
- BrandCrosby
- Maximum Jaw Width1.56"
- Minimum Jaw Width0"
Description
IP10 - 3t Vertical Lifting Clamp w/Straight Eye 0-1 9/16" Jaw
• For vertical lifting, turning and transfer
• Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual and test certificate included with each clamp .
• IP10 - Standard clamp for materials with a surface hardness to 363HV10 (345 HB).
• Full 180° turning range for material transfer, turning or moving.
• Lock open, lock closed ability with latch for pretension on material and then release of material.
• Maintenance and repair kits are available.
• Minimum WLL is 10% of maximum WLL.
• For plate surface hardness to 279HV10, only 5% minimum WLL is needed.
• Design Factor based on EN 13155 and ASME B30.20.