LIFTING SHACKLE FOR HORIZONTAL CLAMP 3 T

Product Description

The Renfroe Lifting Shackle for Horizontal Clamp is a genuine OEM replacement shackle designed specifically for use with Renfroe Horizontal series lifting clamps. Serving as the primary connection point between the horizontal clamp and the overhead rigging hardware, this shackle transfers the full working load from the clamp to the hoist, hook, sling, or chain assembly above it. The design and dimensions of this shackle are specific to the Horizontal clamp series, ensuring correct fit, proper load alignment, and full compatibility with the clamp body and rigging interface for which it was engineered.

Horizontal lifting clamps are commonly used in paired or multi-clamp configurations with spreader beams to lift and carry flat steel plate in a horizontal orientation, and the shackle at each clamp connection point must be capable of handling its share of the total load reliably throughout the operation. As a primary load path component, the lifting shackle is subject to tensile stress, wear at the pin and bow contact points, and fatigue from repeated loading cycles in demanding industrial environments. Regular pre-use inspection is essential, and the shackle must be removed from service and replaced with a genuine Renfroe OEM part immediately whenever wear, elongation, cracking, thread damage, or deformation is detected.

Genuine Renfroe lifting shackles for horizontal clamps are manufactured to the original dimensional and material specifications, ensuring correct fit with the Horizontal clamp body and full compatibility with standard overhead rigging hardware. This component is intended for use by qualified rigging personnel and should always be selected based on the working load limit of the clamp and the total load requirements of the lifting application.

Material: Alloy steel

Compatible With: Renfroe Horizontal series lifting clamps Standard overhead rigging hardware including hooks, slings, chains, and hoist assemblies

Uses: Primary load transfer connection between Renfroe Horizontal clamps and overhead rigging Horizontal plate lifting in paired or multi-clamp configurations with spreader beams Steel service center, fabrication shop, and heavy industrial horizontal plate handling Replacement shackle for scheduled maintenance and inspection programs

Key Features: Genuine Renfroe OEM replacement shackle for Horizontal clamp series Dimensioned specifically for correct fit and load alignment with Horizontal clamp body Primary load-bearing connection subject to tensile stress and wear requiring regular inspection Manufactured to original dimensional and material specifications Compatible with standard overhead rigging hardware within the rated working load limit

Note: Inspect the shackle body, pin, and threads before every use. Remove from service immediately if wear, elongation, cracking, thread damage, or deformation is detected. Never exceed the rated working load limit. Ensure the pin is fully threaded and secured before lifting. Confirm working load limit compatibility with the clamp and full rigging system before use.