LIFTING BEAM 5 TON 5-10 ADJUSTABLE 6 INC

Product Description

The Caldwell Adjustable Lifting Beam is a below-the-hook lifting device rated at 5 Ton working load limit, with an adjustable length range of 5 to 10 ft in 6 in increments, engineered for crane and hoist applications requiring a rigid two-point lift configuration across a range of load widths. The adjustable design allows the beam length to be set at any position within the 5 to 10 ft range in 6 in steps, enabling the rigger to match the beam spread to the specific attachment point spacing of the load without the need for multiple fixed-length beams.

The 6 in increment adjustment system provides a defined set of beam length positions within the overall range, ensuring that the beam is always set to a structurally verified configuration rather than an infinitely variable position, which supports consistent and repeatable rigging setups for loads with known attachment point spacing. At 5 Ton working load limit, this beam is suited for a wide range of heavy industrial lifting tasks involving machinery, fabricated assemblies, structural steel, and other loads with two attachment points spaced within the 5 to 10 ft adjustable range.

The lifting beam provides a rigid structural member that connects the single upper crane hook attachment to two lower load attachment points, distributing the load and eliminating the inward compression forces on the load that would result from sling-based rigging in a standard two-leg bridle configuration. As a Caldwell product, this adjustable lifting beam is built to the dimensional and performance standards associated with the Caldwell line of below-the-hook lifting devices, and should be operated in accordance with Caldwell's specifications and applicable below-the-hook lifting device standards including ASME B30.20.

Material: Steel alloy

Compatible With: Overhead crane and hoist systems rated to meet or exceed the 5 Ton working load limit Slings, shackles, and rigging hardware rated to meet or exceed the 5 Ton working load limit Loads with two attachment points spaced within the 5 to 10 ft adjustable range

Uses: Two-point lifting of loads with attachment point spacing within the 5 to 10 ft range Machinery, fabricated assemblies, and structural component lifting requiring adjustable beam spread Applications requiring elimination of inward compression forces with a rigid two-point lift configuration Facilities handling varied load sizes requiring beam length flexibility within the 5 to 10 ft range

Key Features: 5 Ton working load limit Adjustable length range of 5 to 10 ft in 6 in increments Defined increment adjustment system ensures structurally verified beam length positions Rigid beam construction eliminates inward compression forces on the load Reduces need for multiple fixed-length beams across varied load attachment point spacings Built to Caldwell's below-the-hook lifting device standards

Note: Specifications including lower attachment point hardware details, adjustment mechanism details, and compatible rigging hardware should be confirmed against the official Caldwell product catalog or manufacturer documentation prior to ordering. The lifting beam must only be used within its 5 Ton rated working load limit and at a verified adjustment position, and operated in full accordance with Caldwell's instructions and applicable lifting device safety standards.