CAM SPRING FOR HORIZONTAL CLAMP 8 TON

Product Description

The Renfroe Cam Spring is a genuine OEM replacement component designed for use with Renfroe Horizontal series lifting clamps. The cam spring provides the return tension necessary to reset the cam assembly to its open position when the clamp is released from the workpiece, ensuring the jaw retracts consistently and the clamp is ready for the next lift cycle. Without a properly functioning cam spring, the clamp may fail to open reliably, making attachment and detachment from the load difficult and potentially unsafe in an active lifting environment.

In high-cycle industrial applications such as steel service centers, fabrication shops, and plate handling operations, cam springs are subject to fatigue from repeated compression and extension. Over time, a spring can lose tension, take a set, crack, or break entirely, any of which will affect the reset behavior of the cam assembly and the overall operability of the clamp. Regular inspection of the cam spring is an important part of a comprehensive clamp maintenance program, and replacement should be carried out promptly when any loss of tension or physical damage is detected.

This replacement part is intended for installation by qualified maintenance personnel performing authorized servicing or rebuild of Renfroe Horizontal lifting clamps. Genuine Renfroe OEM cam springs are manufactured to the original load and dimensional specifications, ensuring correct fit and function within the clamp mechanism. Using an OEM spring restores the cam reset behavior to its original design standard and supports continued safe and reliable clamp operation.

Material: Alloy steel spring

Compatible With: Renfroe Horizontal series lifting clamps (confirm specific clamp model and working load limit for correct cam spring selection)

Uses: Replacement cam spring for Renfroe Horizontal lifting clamps Scheduled clamp maintenance, inspection, and rebuild programs Restoration of cam reset function to OEM specification

Key Features: Genuine Renfroe OEM replacement part Provides cam assembly return tension for consistent jaw reset and clamp opening Subject to fatigue in high-cycle applications requiring regular inspection Manufactured to original load and dimensional specifications Supports safe clamp maintenance and reliable operation between lift cycles

Note: Confirm the specific Renfroe Horizontal clamp model and working load limit before ordering to ensure the correct cam spring is selected. Installation must be performed by a qualified person. Conduct a full clamp inspection and function test before returning to service after replacement.