CHAIN CONTAINER 020S-050L

Product Description

The Kito Chain Container is a genuine OEM replacement component designed for use in Kito ER Series, EFS Series, and ES3 Series electric chain hoists, specifically compatible with the ER020S and ER050L models, identified by part number BC-E2. The chain container — also referred to as a chain bucket or chain bag — is the receptacle attached to the hoist body that collects and stores the slack load chain as it accumulates during lifting operations. A correctly sized and securely mounted chain container is essential for safe and organized hoist operation, preventing the slack chain from hanging freely below the hoist body where it could become entangled with the load, rigging hardware, or personnel working in the lift area.

As the hoist raises a load, the slack load chain feeds into the chain container in a controlled manner, and as the hoist lowers the load, the chain is drawn back out of the container and through the hoist body. The chain container must be large enough to contain the full length of slack chain generated at the maximum lift height of the hoist without overflowing or becoming jammed, and must be securely attached to the hoist body to prevent it from detaching under the weight of a full chain load. The compatibility of part number BC-E2 across the ER020S and ER050L models — and across the ER, EFS, and ES3 Series — reflects that these models share a common chain container mounting interface and generate a compatible volume of slack chain at their respective lift height configurations, allowing a single container to serve all three series at the applicable model designations.

The chain container is subject to wear, deformation, and mechanical damage over its service life through the repeated impact and abrasion of the load chain feeding in and out during each lift cycle, accidental impact from loads and rigging hardware, and exposure to industrial operating environments. Conditions requiring chain container replacement include cracks or holes in the container body that allow chain to escape, deformation that prevents the chain from feeding correctly, damage to the container mounting hardware or attachment points, and any condition that compromises the container's ability to safely contain the full slack chain load at the maximum lift height.

Material: Construction consistent with Kito OEM specifications for ER / EFS / ES3 Series chain containers

Compatible With: Kito ER Series electric chain hoists — ER020S and ER050L models Kito EFS Series electric chain hoists — ER020S and ER050L equivalent models Kito ES3 Series electric chain hoists — ER020S and ER050L equivalent models Part number BC-E2

Uses: Replacement of damaged, cracked, or deformed chain containers on Kito ER020S and ER050L electric chain hoists across ER, EFS, and ES3 Series Scheduled preventive maintenance and hoist inspection programs Hoist overhaul and refurbishment Restoration of correct chain containment at the applicable lift height configurations for these models

Key Features: Genuine Kito OEM replacement chain container Compatible with Kito ER Series, EFS Series, and ES3 Series electric chain hoists Fits ER020S and ER050L model designations Part number BC-E2 Prevents slack chain from hanging freely below the hoist body Secure mounting attachment to ER / EFS / ES3 Series hoist body Cross-series compatibility across ER, EFS, and ES3 platforms

Note: Confirm the correct chain container part number for the specific model, series, and lift height with your Kito distributor before ordering. Chain container replacement should be performed by a qualified hoist technician. The hoist must be function tested before returning to service following chain container replacement.