CHAIN PIN FOR HOIST

Product Description

 The Kito Chain Pin is a genuine OEM replacement component designed for use in Kito M3CB Series manual chain hoists, identified by part number C3BA015-9041. The chain pin is an internal mechanical component of the hoist load chain assembly, functioning as the connecting pin that joins individual chain links or secures the chain end fitting within the hoist chain assembly. The chain pin must be in sound condition and correctly installed within the chain assembly to ensure the structural integrity of the load chain system and the safe transmission of the full working load through the chain during every lift cycle.

The chain pin is subject to shear stress, wear, and mechanical fatigue over its service life through the repeated loading cycles of hoist operation, dynamic loads during lifting and lowering, and the cumulative effects of industrial operating environments. Conditions requiring chain pin inspection or replacement include visible wear or reduction in pin diameter at the bearing surfaces, deformation or bending of the pin body, cracking or surface defects, and any condition that compromises the pin's ability to transmit the full shear load of the chain assembly at the rated capacity of the hoist. A chain pin that is worn, deformed, or damaged must be replaced immediately, as a failed chain pin results in separation of the chain assembly and uncontrolled release of the suspended load.

Using a genuine Kito OEM Chain Pin identified by part number C3BA015-9041 ensures the replacement component is dimensionally correct for the M3CB Series chain assembly, manufactured to the correct material grade and shear strength for the rated capacity of the hoist, and produced to the same performance specifications as the original part. Replacement must be performed by a qualified hoist technician familiar with Kito M3CB Series chain assembly procedures, and the hoist must be fully inspected, function tested, and load tested before returning to service.

Material: Alloy steel construction consistent with Kito OEM specifications for M3CB Series chain assembly components

Compatible With: Kito M3CB Series manual chain hoists Part number C3BA015-9041

Uses: Replacement of worn, deformed, or damaged chain pins in Kito M3CB Series manual chain hoist chain assemblies Scheduled preventive maintenance and hoist inspection programs Hoist overhaul and chain assembly refurbishment Restoration of correct chain assembly integrity and load transmission

Key Features: Genuine Kito OEM replacement chain pin Designed for Kito M3CB Series manual chain hoists Part number C3BA015-9041 Alloy steel construction to OEM specifications Ensures correct dimensional fit and shear strength within the M3CB Series chain assembly Critical structural component for safe load transmission through the chain assembly

Note: Chain pin replacement must be performed by a qualified hoist technician. The complete chain assembly must be inspected and correctly reassembled following Kito M3CB Series service procedures. The hoist must be fully inspected, function tested, and load tested before returning to service following chain pin replacement. Never operate a hoist with a suspected chain assembly defect — remove the hoist from service immediately and arrange for inspection and repair.