TOP HOOK FOR KITO HOIST CF4, 1 TON

Product Description

The Kito Top Hook Assembly is a genuine OEM replacement component designed for use in Kito CF Series manual chain hoists at the CF4 1 tonne capacity rating, identified by part number CF001-010. The top hook assembly is the primary suspension component of the chain hoist, connecting the hoist body to the overhead support structure — typically a beam, trolley, or runway system — and transmitting the full working load of the hoist and its attached load into the overhead structure during every lift cycle. Maintaining a top hook assembly that is in sound condition and within the manufacturer's wear and deformation tolerances is one of the most critical aspects of hoist inspection and maintenance, as a damaged, deformed, or worn top hook assembly is a direct risk to the safety of the lift and the personnel working in the area.

The top hook assembly on a manual chain hoist consists of the hook body, the hook latch safety mechanism, the swivel bearing or thrust bearing that allows the hoist to rotate freely under load, and the retaining hardware that secures the hook assembly to the hoist body. The hook body must be inspected regularly for deformation — particularly throat opening beyond the manufacturer's maximum allowable limit — twisting of the hook shank, cracks or surface defects in the hook body, and wear at the saddle of the hook where the supporting beam flange or trolley makes contact. The hook latch must be inspected for correct spring tension, positive engagement with the hook tip, and any damage that prevents the latch from closing fully and retaining the load. The swivel bearing must be inspected for smooth rotation, corrosion, and any roughness or binding that prevents the hoist from rotating freely under load.

At the CF4 1 tonne capacity rating, the top hook assembly is rated for the full 1 tonne working load of the CF Series hoist and must not be used to support loads in excess of this rating. Using a genuine Kito OEM Top Hook Assembly identified by part number CF001-010 ensures the replacement assembly is dimensionally correct for the CF4 hoist body mounting, rated to the full 1 tonne working load of the CF4 hoist, and manufactured to the same material and performance specifications as the original part.

Material: Alloy steel hook body with safety latch, swivel bearing, and retaining hardware consistent with Kito OEM specifications for CF Series suspension components

Compatible With: Kito CF Series manual chain hoists - CF4 1 tonne capacity Part number CF001-010

Uses: Replacement of deformed, worn, cracked, or damaged top hook assemblies on Kito CF Series CF4 1 tonne manual chain hoists Scheduled preventive maintenance and hoist inspection programs Hoist overhaul and refurbishment Restoration of correct hoist suspension and overhead connection at full rated capacity

Key Features: Genuine Kito OEM replacement top hook assembly Designed for Kito CF Series manual chain hoist - CF4 1 tonne capacity Part number CF001-010 Complete assembly including hook body, safety latch, swivel bearing, and retaining hardware Alloy steel construction to OEM specifications Rated to full 1 tonne working load of the CF4 hoist

Note: Top hook assembly replacement must be performed by a qualified hoist technician. The replacement hook must be inspected for correct throat opening, latch function, and swivel bearing operation before the hoist is returned to service. The hoist must be fully inspected, function tested, and load tested before returning to service following top hook assembly replacement. Never use a hook with a deformed throat, damaged latch, or seized swivel bearing — remove the hoist from service immediately and arrange for inspection and repair.