CHAIN CONTAINER FOR ED SERIES HOIST 10F

Product Description

The Kito Chain Container is a genuine OEM replacement component designed for use in Kito ED Series electric chain hoists at the standard 10 ft lift height configuration. The chain container — also referred to as a chain bucket or chain bag — is the receptacle attached to the hoist body that collects and stores the slack load chain as it accumulates during lifting operations. A correctly sized and securely mounted chain container is essential for safe and organized hoist operation, preventing the slack chain from hanging freely below the hoist body where it could become entangled with the load, rigging hardware, or personnel working in the lift area.

As the hoist raises a load, the slack load chain feeds into the chain container in a controlled manner, and as the hoist lowers the load, the chain is drawn back out of the container and through the hoist body. The chain container must be large enough to contain the full length of slack chain generated at the maximum lift height of the hoist without overflowing or becoming jammed, and must be securely attached to the hoist body to prevent it from detaching under the weight of a full chain load. The 10 ft maximum lift specification for this chain container confirms it is the standard short-lift configuration container for the ED Series, sized for the volume of slack chain generated at up to 10 ft of lift — the smallest capacity in the ED Series chain container range, suited for applications where the hoist is installed close to the load and a short working lift range is sufficient.

The chain container is subject to wear, deformation, and mechanical damage over its service life through the repeated impact and abrasion of the load chain feeding in and out during each lift cycle, accidental impact from loads and rigging hardware, and exposure to industrial operating environments. Conditions requiring chain container replacement include cracks or holes in the container body that allow chain to escape, deformation that prevents the chain from feeding correctly, damage to the container mounting hardware or attachment points, and any condition that compromises the container's ability to safely contain the full slack chain load at the maximum lift height.

Material: Steel or engineered plastic construction consistent with Kito OEM specifications for ED Series chain containers

Compatible With: Kito ED Series electric chain hoists 10 ft maximum lift height configuration

Uses: Replacement of damaged, cracked, or deformed chain containers on Kito ED Series electric chain hoists at 10 ft lift configurations Scheduled preventive maintenance and hoist inspection programs Hoist overhaul and refurbishment Standard short-lift applications requiring a correctly sized chain container

Key Features: Genuine Kito OEM replacement chain container Compatible with Kito ED Series electric chain hoists Sized for 10 ft maximum lift height Standard short-lift configuration chain container Prevents slack chain from hanging freely below the hoist body Secure mounting attachment to ED Series hoist body Steel or engineered plastic construction to OEM specifications

Note: Confirm the correct chain container part number for the specific ED Series model with your Kito distributor before ordering. Chain container replacement should be performed by a qualified hoist technician. The hoist must be function tested before returning to service following chain container replacement.