FRAME SOCKET

Product Description

 The Kito Chain Stopper is a genuine OEM replacement component designed for use in Kito ER2 Series electric chain hoists, identified by part number ER2CS9511. The chain stopper is a critical safety component integrated into the load chain assembly of the electric chain hoist, functioning as a mechanical end stop that prevents the load chain from running completely through the hoist body during lowering operations. By arresting chain travel at the lower limit of the hoist's rated lift range, the chain stopper protects the internal chain guide, load sheave, and chain pocket from damage caused by chain run-through, and prevents the accidental release of the lower hook and attached load.

The chain stopper is subject to wear and mechanical stress over its service life through repeated contact with the hoist body at the end of each lowering cycle. In high-cycle applications or hoists that have seen extended service, the chain stopper should be inspected regularly for deformation, cracking, wear at the contact surfaces, and any signs of fatigue that could compromise its ability to arrest chain travel reliably. A damaged or missing chain stopper must be replaced immediately, as operating a hoist without a functional chain stopper creates a risk of chain run-through and uncontrolled load release.

Using a genuine Kito OEM Chain Stopper identified by part number ER2CS9511 ensures the replacement component is dimensionally correct for the ER2 Series hoist body and chain pitch, and manufactured to the same material and performance specifications as the original part. Replacement must be performed by a qualified hoist technician familiar with Kito ER2 Series service procedures, and the hoist must be fully inspected, electrically tested, function tested, and load tested before returning to service.

Material: Alloy steel construction consistent with Kito OEM specifications for ER2 Series chain assembly components

Compatible With: Kito ER2 Series electric chain hoists Part number ER2CS9511

Uses: Replacement of worn, deformed, or damaged chain stoppers on Kito ER2 Series electric chain hoists Scheduled preventive maintenance and hoist inspection programs Hoist overhaul and refurbishment Restoration of chain end-stop safety function

Key Features: Genuine Kito OEM replacement chain stopper Designed for Kito ER2 Series electric chain hoists Part number ER2CS9511 Critical safety component preventing chain run-through and uncontrolled load release Alloy steel construction to OEM specifications Ensures correct dimensional fit with ER2 Series chain pitch and hoist body

Note: Please verify the exact component description for part number ER2CS9511 against your Kito ER2 Series parts catalog or with your Kito distributor before publishing. A hoist with a missing or damaged chain stopper must be removed from service immediately. Replacement must be performed by a qualified hoist technician. The hoist must be fully inspected, electrically tested, function tested, and load tested before returning to service.