The Petzl WIRE STROP STEEL ANCHOR is a 200 cm steel wire anchor strap designed for use as a temporary or semi-permanent anchor point in rope access, fall protection, and rescue applications. Steel wire strops provide a durable, abrasion-resistant anchoring solution for environments where textile slings or webbing anchors would be subject to damage from sharp edges, heat, chemicals, or abrasive surfaces — conditions commonly encountered in industrial, construction, and rescue environments. The wire strop can be wrapped around structural elements such as beams, columns, pipes, and trees, with the ends connected to form a closed loop anchor point for attachment of fall arrest or rope access systems.
At 200 cm in length, the WIRE STROP STEEL ANCHOR accommodates a wide range of structural anchor configurations, including wrap-around anchors on large-diameter elements and extended reach setups where the anchor point must be positioned away from the structure. It is rated for two-person use under TS 16415, making it suitable for rescue configurations where both a rescuer and victim may be connected to the same anchor simultaneously.
Certified to CE EN 795 B, TS 16415 (two-person use), NFPA 1983 Technical Use, ANSI Z359.18, CE EN 354, GB 30862 / B, and XF494: FZL-B-Q, the WIRE STROP STEEL ANCHOR meets the key international standards for anchor devices and lanyards used in fall protection and rescue systems across North American, European, and Chinese markets.
Material: Steel wire (specific construction not confirmed by available sources — refer to Petzl official product documentation for full material specifications)
Compatible With: Petzl carabiners and connectors rated for the anchor load Petzl rope access and fall protection systems Structural anchor points including beams, columns, pipes, and similar elements
Uses: Temporary and semi-permanent anchor point construction in rope access Fall protection anchor setup in industrial and construction environments Rescue anchor configurations requiring two-person rated capacity Anchoring in environments where textile slings are unsuitable due to abrasion, heat, or chemical exposure
Key Features: 200 cm length for versatile anchor configurations Steel wire construction for abrasion and damage resistance Two-person rated — TS 16415 certified CE EN 795 B certified NFPA 1983 Technical Use certified ANSI Z359.18 certified CE EN 354 certified GB 30862 / B certified XF494: FZL-B-Q certified
In Stock
