LOAD CHAIN NICKEL-PLATED KITO

Product Description

The Kito Load Chain is a genuine OEM replacement component designed for use in Kito ER2 Series electric chain hoists in the Body D configuration, using 8.0mm nickel plated chain. The load chain is the primary load-bearing element of the electric chain hoist, transmitting the full working load between the load sheave and the lower hook assembly during every lift cycle. Maintaining a load chain that is in sound condition and within the manufacturer's wear tolerances is one of the most critical aspects of hoist inspection and maintenance, as a worn, damaged, or elongated chain is a direct risk to the safety of the lift and the personnel working in the area.

The load chain on an electric chain hoist is subject to wear, elongation, corrosion, and mechanical damage over its service life through repeated powered loading cycles, dynamic loading, and exposure to harsh operating environments including moisture, chemicals, abrasives, and elevated temperatures. Kito specifies maximum allowable elongation limits for each chain size and capacity class, and chains that have reached or exceeded these limits must be replaced immediately regardless of visible condition. Additional conditions requiring immediate chain replacement include twisted or kinked links, cracked or deformed links, gouges or nicks in the link surface, corrosion pitting that reduces the cross-sectional area of the chain wire, and any link that does not articulate freely through the load sheave or chain guide.

The 8.0mm nickel plated designation identifies the chain wire diameter and surface treatment specific to the ER2 Series Body D configuration. The nickel plated finish provides superior corrosion resistance compared to standard black or zinc plated chain variants, making this chain particularly well suited for use in environments with elevated moisture, humidity, chemical exposure, or washdown requirements where maximum corrosion protection is required. The Body D designation within the ER2 Series identifies the specific hoist body size and capacity class, and the 8.0mm chain pitch and link geometry are matched precisely to the Body D load sheave and chain guide to ensure correct engagement and smooth operation throughout the full lift range.

Material: Grade 80 or equivalent alloy steel chain construction consistent with Kito OEM specifications for ER2 Series 8.0mm wire diameter Nickel plated surface finish for superior corrosion resistance

Compatible With: Kito ER2 Series electric chain hoists - Body D configuration Applicable ER2 Body D capacity ratings using 8.0mm load chain SKU KER080

Uses: Replacement of worn, elongated, damaged, or corroded load chains on Kito ER2 Series Body D electric chain hoists Scheduled preventive maintenance and hoist inspection programs Hoist overhaul and refurbishment Applications requiring superior corrosion resistance in demanding or wet environments

Key Features: Genuine Kito OEM replacement load chain 8.0mm wire diameter Nickel plated surface finish for superior corrosion resistance Designed for Kito ER2 Series electric chain hoist - Body D configuration SKU KER080 Alloy steel construction to OEM specifications Ensures correct pitch, link geometry, and material grade for Body D load sheave engagement

Note: Load chain replacement on electric chain hoists must be performed by a qualified hoist technician. The hoist must be fully inspected, electrically tested, function tested, and load tested before returning to service following chain replacement. Never splice, repair, or modify a load chain. Always replace with genuine OEM chain of the correct grade, pitch, diameter, and surface finish for the specific ER2 body size and operating environment.