HARNESS SAF UNIV 310LB GROM D-RING

Product Description

The Peakworks Safety Harness is a universal-fit full-body harness rated to 310 lb, featuring grommet adjustment and a D-ring attachment configuration, designed to provide a secure and adaptable fit for workers across a wide range of body sizes in construction, industrial maintenance, and general work-at-height applications. The grommet adjustment system provides discrete, positive adjustment positions that hold strap length securely in place once set, preventing unintended strap slippage or loosening during work at height. Universal sizing accommodates a broad range of worker body sizes within a single harness model, reducing the need to stock multiple size-specific harnesses while ensuring the harness can be correctly fitted to workers with varying body proportions.

The D-ring attachment point provides the primary fall arrest connection for use with compatible lanyards, self-retracting lifelines, or other connecting subsystems. Verify the specific D-ring location and configuration — dorsal, sternal, hip, or other — with Peakworks product documentation to confirm the harness is appropriate for the intended fall arrest application and that the correct attachment point is used for the specific work task. Proper harness fit is essential to fall arrest performance regardless of attachment point configuration — straps must be adjusted snugly at all grommet adjustment positions with the primary D-ring correctly positioned before work begins, and all grommet settings must be verified as secure before the worker is exposed to fall hazards.

This harness must be used as part of a complete personal fall arrest system with compatible connecting subsystems and anchor points rated for applicable loads. Inspect the harness before each use for webbing wear, fraying, cuts, chemical damage, discoloration, buckle and hardware defects, grommet condition, and stitching integrity. Remove from service immediately if any defects are identified or if the harness has been subjected to fall arrest forces. Always follow the manufacturer's donning, adjustment, and inspection instructions and applicable fall protection regulations.

Material: Webbing construction (verify specific material with Peakworks product documentation) Hardware (verify specific buckle and hardware material with Peakworks product documentation)

Compatible With: Compatible shock-absorbing lanyards, self-retracting lifelines, and rope grab devices for fall arrest Fall arrest anchor points rated for applicable loads

Uses: Full-body harness for personal fall arrest systems Construction, industrial maintenance, and general work-at-height applications Applications requiring universal sizing with grommet adjustment Applications where the specific D-ring configuration is required for the work task

Key Features: Universal sizing for a wide range of worker body sizes 310 lb capacity rating Grommet adjustment for secure, positive strap length settings D-ring fall arrest attachment point Suitable for a broad range of work-at-height applications

Note: Verify the specific D-ring location and configuration with Peakworks product documentation before use to confirm the correct attachment point is used for the intended application. Always verify all grommet adjustment settings are secure before beginning work. Always inspect and properly adjust the harness before each use, verifying the primary D-ring is correctly positioned and all straps are snug and correctly set at their grommet positions. A harness that has been subjected to fall arrest forces must be removed from service immediately and must not be reused. Inspect before every use and retire from service if any damage, defect, or fall arrest event is detected.