HARNESS UPGRADED PADDED XL 400LB POLYEST

Product Description

The Peakworks Upgraded Padded Full-Body Harness is an XL harness rated to 400 lb, constructed from polyester webbing, designed to provide enhanced comfort and fit for heavier workers requiring extra-large sizing and high-capacity fall arrest performance in demanding work-at-height applications. The 400 lb capacity rating accommodates heavier workers or those carrying substantial tools and equipment, where a standard 310 lb capacity harness would be insufficient for the worker's total weight. Polyester webbing construction delivers excellent resistance to moisture, UV exposure, abrasion, and common industrial chemicals, ensuring reliable performance and long service life across a wide range of indoor and outdoor work environments.

The upgraded padded configuration incorporates additional padding at key contact points including the shoulders, chest, and legs, reducing pressure and discomfort during prolonged wear and extended work shifts at height. For heavier workers, proper harness fit and padding are especially important as the forces distributed across the harness during a fall arrest event are greater, making correct adjustment and adequate padding at contact points critical to both comfort during normal use and protection during fall arrest. The dorsal D-ring provides the primary fall arrest attachment point and must be positioned correctly at the center of the worker's upper back between the shoulder blades before work begins.

This harness must be used as part of a complete personal fall arrest system with compatible connecting subsystems and anchor points rated for the 400 lb capacity range. All lanyards, self-retracting lifelines, rope grabs, and anchor points used with this harness must be rated for and compatible with the 400 lb capacity requirement. Inspect the harness before each use for webbing wear, fraying, cuts, chemical damage, discoloration, buckle and hardware defects, and stitching integrity. Remove from service immediately if any defects are identified or if the harness has been subjected to fall arrest forces.

Material: Polyester webbing Hardware (verify specific buckle and hardware material with Peakworks product documentation)

Compatible With: Shock-absorbing lanyards, self-retracting lifelines, and rope grab devices rated for 400 lb capacity Fall arrest anchor points rated for applicable loads Compatible tool lanyard attachment points (verify with Peakworks product documentation)

Uses: Full-body harness for personal fall arrest systems requiring 400 lb capacity Construction, industrial maintenance, and general work-at-height applications for heavier workers Extended wear applications where enhanced padding improves comfort during long work shifts Applications requiring XL sizing with high-capacity fall arrest performance

Key Features: XL sizing for larger workers 400 lb capacity rating for heavier workers and those carrying substantial tools and equipment Polyester webbing construction for moisture, UV, and abrasion resistance Upgraded padding at key contact points for enhanced comfort during extended wear Dorsal D-ring fall arrest attachment point

Note: Always confirm the worker's total weight including tools and equipment does not exceed the 400 lb rated capacity before use. All connecting subsystems and anchor points must be rated for and compatible with the 400 lb capacity requirement. Always inspect and properly adjust the harness before each use. A harness that has been subjected to fall arrest forces must be removed from service immediately and must not be reused. Inspect before every use and retire from service if any damage, defect, or fall arrest event is detected.