LANYARD ABSORBING SHOCK E6 SHOCK PACK 1

Product Description

The Peakworks E6 Shock-Absorbing Lanyard is a single-leg fall arrest lanyard featuring an integrated shock pack energy absorber, designed to reduce the forces transmitted to the worker's body during a fall arrest event. The shock pack deploys during a fall, tearing open in a controlled manner to dissipate energy and limit the maximum arrest force experienced by the worker to levels within established safety thresholds. This energy-absorbing function is a critical component of a compliant personal fall arrest system, protecting the worker from injury caused by the sudden deceleration of fall arrest.

The E6 designation identifies this lanyard within the Peakworks product family, indicating specific connector and construction configurations suited for general industry and construction fall protection applications. Single-leg lanyards are the standard configuration for most fall arrest applications where continuous 100% tie-off is not required, providing a straightforward and reliable connection between the worker's harness dorsal D-ring and the anchor point. The lanyard is suitable for use in construction, industrial maintenance, utilities, oil and gas, and general work-at-height applications.

This lanyard must be connected to the dorsal D-ring of a compatible full-body harness and to a suitable anchor point rated for fall arrest loads. Sufficient fall clearance below the worker must be confirmed before use, accounting for lanyard length, shock pack deployment extension, harness stretch, and worker height. Inspect the lanyard and shock pack before each use for webbing wear, fraying, stitching damage, chemical exposure, hardware defects, and shock pack deployment indicators. Remove from service immediately if the shock pack has been deployed or if any defects are identified.

Material: Webbing construction (verify specific material with Peakworks product documentation) Integrated shock pack energy absorber Steel or alloy snap hooks or carabiners (verify connector type and material with Peakworks product documentation)

Compatible With: Full-body harnesses with dorsal D-ring fall arrest attachment Fall arrest anchor points rated for applicable loads Compatible Peakworks E6 series accessories and connectors

Uses: Single-leg fall arrest lanyard for personal fall arrest systems Construction, industrial maintenance, and general work-at-height applications Utilities, oil and gas, and telecommunications fall protection Applications requiring energy absorption to limit arrest forces

Key Features: Single-leg configuration Integrated shock pack energy absorber to limit maximum arrest force E6 series designation for specific connector and construction configuration Suitable for general industry and construction fall arrest applications

Note: Always confirm sufficient fall clearance below the work position before use, accounting for lanyard length, shock pack deployment extension, harness stretch, and worker height. A deployed shock pack indicates the lanyard has arrested a fall — remove from service immediately and do not reuse. Inspect before every use and retire from service if any damage or defect is detected.