LNYD SHOCK ABSORBING 200TO350LB 6FT

Product Description

The Peakworks Shock-Absorbing Lanyard is a 6 ft fall arrest lanyard featuring an integrated energy absorber, designed for workers within the 200 to 350 lb capacity range. The energy absorber deploys during a fall arrest event, tearing open in a controlled manner to dissipate kinetic energy and limit the maximum arrest force transmitted to the worker's body to levels within established safety thresholds. This energy-absorbing function is a critical element of a compliant personal fall arrest system, protecting the worker from injury caused by the sudden deceleration forces of fall arrest.

The 200 to 350 lb capacity range accommodates heavier workers or those carrying substantial tools and equipment, where a standard-capacity lanyard would be insufficient. Selecting a lanyard with the correct capacity range is essential to ensure the energy absorber deploys correctly and limits arrest forces as designed for the worker's actual weight. The 6 ft length provides extended reach from the anchor point to the harness dorsal D-ring, making it suitable for applications where the anchor point is positioned at or slightly above the worker's level. Fall clearance requirements must be carefully evaluated when using a 6 ft lanyard, as the longer length increases the total fall distance and clearance needed below the work position compared to shorter lanyard variants.

This lanyard must be connected to the dorsal D-ring of a compatible full-body harness and to a suitable anchor point rated for fall arrest loads. Sufficient fall clearance below the worker must be confirmed before use, accounting for lanyard length, energy absorber deployment extension, harness stretch, and worker height. Inspect the lanyard and energy absorber before each use for webbing wear, fraying, stitching damage, chemical exposure, hardware defects, and energy absorber deployment indicators. Remove from service immediately if the energy absorber has been deployed or if any defects are identified.

Material: Webbing construction (verify specific material with Peakworks product documentation) Integrated energy absorber pack Steel or alloy snap hooks or carabiners (verify connector type and material with Peakworks product documentation)

Compatible With: Full-body harnesses with dorsal D-ring fall arrest attachment Fall arrest anchor points rated for applicable loads

Uses: Single-leg fall arrest lanyard for personal fall arrest systems Construction, industrial maintenance, and general work-at-height applications Applications requiring energy absorption to limit arrest forces for heavier workers Suitable for workers within the 200 to 350 lb capacity range

Key Features: 6 ft length Capacity range: 200 to 350 lb Integrated energy absorber to limit maximum arrest force during fall arrest Single-leg configuration for general fall arrest applications Suitable for heavier workers and those carrying substantial tools and equipment

Note: Always confirm the worker's total weight including tools and equipment falls within the 200 to 350 lb rated capacity range before use. Confirm sufficient fall clearance below the work position before use, accounting for lanyard length, energy absorber deployment extension, harness stretch, and worker height. A deployed energy absorber indicates the lanyard has arrested a fall — remove from service immediately and do not reuse. Inspect before every use and retire from service if any damage or defect is detected.