LANYARD RESTRAINT 4FT POLYEST ROPE 5/8IN

Product Description

The Peakworks Restraint Lanyard is a 4 ft lanyard constructed from 5/8 in diameter polyester rope, designed for use in work restraint applications that prevent workers from reaching fall hazard zones rather than arresting a fall after it occurs. Polyester rope construction provides excellent resistance to moisture, UV exposure, abrasion, and common industrial chemicals, ensuring reliable performance and long service life in both indoor and outdoor work environments. The 5/8 in rope diameter provides a robust and durable lanyard body suited for demanding job site conditions.

Work restraint lanyards are used in conjunction with a full-body harness and a suitable anchor point to physically limit a worker's range of movement, keeping them away from unprotected edges, floor openings, and other fall hazards. The 4 ft length is a practical restraint lanyard length that provides a working radius appropriate for many common restraint configurations while maintaining effective limitation of movement away from hazard zones. This type of system is appropriate where the work area and anchor point configuration allow the restraint method to be reliably applied and where the worker cannot reach the fall hazard when the lanyard is taut.

The lanyard should be connected to the appropriate attachment point of a compatible full-body harness as directed by the harness manufacturer and applicable fall protection regulations. Inspect the lanyard before each use for fraying, kinking, chemical damage, discoloration, or hardware defects, and remove from service immediately if any defects are found. Work restraint systems must be planned and implemented by a competent person to ensure the restraint method is effective for the specific hazard and work area configuration.

Material: 5/8 in polyester rope Steel or alloy hardware connectors (verify specific hardware material with Peakworks product documentation)

Compatible With: Compatible full-body harnesses with appropriate attachment points for restraint use Suitable anchor points rated for restraint system loads

Uses: Work restraint to prevent workers from reaching fall hazard zones Unprotected edge and floor opening hazard control Construction, industrial maintenance, and general work-at-height restraint applications

Key Features: 4 ft length 5/8 in diameter polyester rope construction Polyester rope for moisture, UV, and abrasion resistance Designed for work restraint applications

Note: This lanyard is designed for work restraint, not fall arrest. It must not be used as a fall arrest lanyard. Work restraint systems must be planned by a competent person to confirm the restraint method is effective for the specific hazard and work configuration. Inspect before every use and retire from service if any damage or defect is detected.