LANYARD RESTRAINT 4FT POLYEST WBG 1IN

Product Description

The Peakworks Restraint Lanyard is a 4 ft, 1 in wide polyester lanyard designed for use in work restraint applications, preventing workers from reaching fall hazard zones rather than arresting a fall after it occurs. The WBG designation indicates compatibility with specific Peakworks hardware and connector configurations. Polyester webbing construction provides excellent resistance to moisture, UV exposure, abrasion, and common industrial chemicals, ensuring reliable performance and long service life in both indoor and outdoor work environments.

Work restraint lanyards are used in conjunction with a full-body harness and a suitable anchor point to physically limit a worker's range of movement, keeping them away from unprotected edges, floor openings, and other fall hazards. The 4 ft length is a common restraint lanyard length that provides a practical working radius while maintaining effective restraint from hazard zones. This type of system is appropriate where the work area and anchor point configuration allow the restraint method to be reliably applied and where the worker cannot reach the fall hazard when the lanyard is taut.

The lanyard should be connected to the front or rear attachment point of a compatible full-body harness as directed by the harness manufacturer and applicable fall protection regulations. Inspect the lanyard before each use for cuts, fraying, chemical damage, discoloration, or hardware defects, and remove from service immediately if any defects are found. Work restraint systems must be planned and implemented by a competent person to ensure the restraint method is effective for the specific hazard and work area configuration.

Material: 1 in polyester webbing Steel or alloy hardware (verify specific hardware material with Peakworks product documentation)

Compatible With: Peakworks WBG series connectors and hardware Compatible full-body harnesses with appropriate attachment points for restraint use

Uses: Work restraint to prevent workers from reaching fall hazard zones Unprotected edge and floor opening hazard control Construction, industrial maintenance, and general work-at-height restraint applications

Key Features: 4 ft length 1 in wide polyester webbing construction WBG compatible connector configuration Polyester webbing for moisture, UV, and abrasion resistance Designed for work restraint applications

Note: This lanyard is designed for work restraint, not fall arrest. It must not be used as a fall arrest lanyard. Work restraint systems must be planned by a competent person to confirm the restraint method is effective for the specific hazard and work configuration. Inspect before every use and retire from service if any damage is detected.