HARN SHOCK ABSORBING 200TO350LB

Product Description

The Peakworks Shock-Absorbing Harness Lanyard is a fall arrest lanyard featuring an integrated energy absorber, designed for direct attachment to a compatible full-body harness for workers within the 200 to 350 lb capacity range. The energy absorber deploys during a fall arrest event, tearing open in a controlled manner to dissipate kinetic energy and limit the maximum arrest force transmitted to the worker's body to levels within established safety thresholds. The harness-integrated configuration keeps the lanyard connected directly to the harness, providing a streamlined fall arrest connection for work-at-height applications where this attachment method is specified or preferred.

The 200 to 350 lb capacity range accommodates heavier workers or those carrying substantial tools and equipment, where a standard-capacity lanyard would be insufficient for the worker's total weight. Selecting a lanyard with the correct capacity range is essential to ensure the energy absorber deploys correctly and limits arrest forces as designed for the worker's actual weight. The harness attachment configuration is suited for applications where the lanyard is intended to remain connected to the harness as part of an integrated fall arrest system, reducing the steps required to connect and disconnect the fall arrest system during transitions between work positions or anchor points.

This lanyard must be connected to the appropriate attachment point of a compatible full-body harness rated for the 200 to 350 lb capacity range as directed by the manufacturer's instructions and to a suitable anchor point rated for fall arrest loads. Sufficient fall clearance below the worker must be confirmed before use, accounting for lanyard length, energy absorber deployment extension, harness stretch, and worker height. Inspect the lanyard and energy absorber before each use for webbing wear, fraying, stitching damage, chemical exposure, hardware defects, and energy absorber deployment indicators. Remove from service immediately if the energy absorber has been deployed or if any defects are identified.

Material: Webbing construction (verify specific material with Peakworks product documentation) Integrated energy absorber pack Steel or alloy snap hooks or carabiners (verify connector type and material with Peakworks product documentation)

Compatible With: Compatible Peakworks full-body harnesses with appropriate harness lanyard attachment points rated for the 200 to 350 lb capacity range Fall arrest anchor points rated for applicable loads

Uses: Harness-integrated fall arrest lanyard for personal fall arrest systems Construction, industrial maintenance, and general work-at-height applications for heavier workers Applications requiring energy absorption to limit arrest forces for workers within the 200 to 350 lb capacity range Applications where harness-integrated lanyard configuration is preferred

Key Features: Capacity range: 200 to 350 lb Integrated energy absorber to limit maximum arrest force during fall arrest Harness attachment configuration for streamlined fall arrest connection Suitable for heavier workers and those carrying substantial tools and equipment

Note: Always confirm the worker's total weight including tools and equipment falls within the 200 to 350 lb rated capacity range before use. Confirm sufficient fall clearance below the work position before use, accounting for lanyard length, energy absorber deployment extension, harness stretch, and worker height. A deployed energy absorber indicates the lanyard has arrested a fall — remove from service immediately and do not reuse. Inspect before every use and retire from service if any damage or defect is detected.