HARNESS SAF S GROM PASS-THRU FRICT

Product Description

The Peakworks Safety Harness is a small full-body harness featuring grommet adjustment, pass-thru leg buckles, and friction buckle adjustment, designed to provide secure, reliable fit and fall arrest performance for workers in construction, industrial maintenance, and general work-at-height applications. The grommet adjustment system provides discrete, positive adjustment positions that hold strap length securely in place once set, preventing unintended strap slippage or loosening during work at height. Pass-thru buckles on the leg straps provide a positive, secure connection that must be threaded and latched correctly before use, offering reliable leg strap closure that resists accidental disengagement. Friction buckles provide tool-free strap length adjustment at additional adjustment points, allowing workers to quickly and precisely fine-tune the harness fit.

The combination of grommet, pass-thru, and friction buckle adjustment mechanisms provides multiple secure and reliable fit adjustment options across the harness, accommodating the range of body proportions encountered in smaller workers. Proper harness fit is especially critical for smaller workers — straps must be adjusted so the harness fits snugly against the body without restricting movement or circulation, with the dorsal D-ring centered between the shoulder blades, the chest strap positioned at mid-sternum level, and the leg straps fitting snugly around the upper thighs with the pass-thru buckles fully threaded and latched before work begins. The small sizing accommodates workers within the specified size range and must be verified to fit correctly before each use, with all grommet settings confirmed secure and no excessive slack at any adjustment point.

This harness must be used as part of a complete personal fall arrest system with a compatible shock-absorbing lanyard, self-retracting lifeline, or other connecting subsystem, and a suitable anchor point rated for fall arrest loads. Inspect the harness before each use for webbing wear, fraying, cuts, chemical damage, discoloration, buckle and hardware defects, grommet condition, and stitching integrity. Remove from service immediately if any defects are identified or if the harness has been subjected to fall arrest forces. Always follow the manufacturer's donning, adjustment, and inspection instructions and applicable fall protection regulations.

Material: Webbing construction (verify specific material with Peakworks product documentation) Hardware (verify specific buckle and hardware material with Peakworks product documentation)

Compatible With: Compatible shock-absorbing lanyards, self-retracting lifelines, and rope grab devices for fall arrest Fall arrest anchor points rated for applicable loads

Uses: Full-body harness for personal fall arrest systems Construction, industrial maintenance, and general work-at-height applications Applications requiring a combination of grommet, pass-thru, and friction buckle adjustment Applications where positive-latch pass-thru leg strap closure is preferred

Key Features: Small sizing Grommet adjustment for secure, positive strap length settings Pass-thru buckle leg straps for positive-latch, secure leg strap closure Friction buckle adjustment for tool-free, precise strap length fine-tuning Dorsal D-ring fall arrest attachment point

Note: Always verify pass-thru leg buckles are fully threaded and latched and all grommet adjustment settings are secure before beginning work. Correct fit is especially critical for smaller workers — inspect and adjust all straps carefully before each use, verifying the dorsal D-ring is centered between the shoulder blades and all straps are snug and correctly positioned with no excessive slack. A harness that has been subjected to fall arrest forces must be removed from service immediately and must not be reused. Inspect before every use and retire from service if any damage, defect, or fall arrest event is detected.