LNYD SHOCK PACK 60TO141KG 25FT

Product Description

The Peakworks Shock-Absorbing Lanyard is a 25 ft fall arrest lanyard featuring an integrated shock pack energy absorber, designed for workers within the 60 to 141 kg capacity range. The shock pack deploys during a fall arrest event, tearing open in a controlled manner to dissipate kinetic energy and limit the maximum arrest force transmitted to the worker's body to levels within established safety thresholds. This energy-absorbing function is a critical element of a compliant personal fall arrest system, protecting the worker from injury caused by the sudden deceleration forces of fall arrest.

The 25 ft length makes this an extended-reach shock-absorbing lanyard, suited for applications where the anchor point is significantly above or away from the worker's connection point, or where a longer lanyard is required to reach a suitable anchor from the work position. The 60 to 141 kg capacity range accommodates a broad range of workers including those carrying tools and equipment, making it appropriate for general industry and construction fall protection applications. As with all extended-length lanyards, fall clearance calculations are especially critical — the total fall clearance below the worker must account for the full lanyard length, shock pack deployment extension, harness stretch, and worker height before the lowest obstruction is reached.

This lanyard must be connected to the dorsal D-ring of a compatible full-body harness and to a suitable anchor point rated for fall arrest loads. The anchor point must be positioned to minimize free fall distance as much as possible given the lanyard length. Inspect the lanyard and shock pack before each use for webbing wear, fraying, stitching damage, chemical exposure, hardware defects, and shock pack deployment indicators. Remove from service immediately if the shock pack has been deployed or if any defects are identified.

Material: Webbing construction (verify specific material with Peakworks product documentation) Integrated shock pack energy absorber Steel or alloy snap hooks or carabiners (verify connector type and material with Peakworks product documentation)

Compatible With: Full-body harnesses with dorsal D-ring fall arrest attachment Fall arrest anchor points rated for applicable loads

Uses: Extended-reach fall arrest lanyard for personal fall arrest systems Applications requiring longer lanyard length to reach a suitable anchor point Construction, industrial maintenance, and general work-at-height applications Suitable for workers within the 60 to 141 kg capacity range

Key Features: 25 ft length for extended anchor point reach Capacity range: 60 to 141 kg Integrated shock pack energy absorber to limit maximum arrest force during fall arrest Single-leg configuration for general fall arrest applications

Note: Fall clearance calculations are critical with this lanyard due to its 25 ft length. A competent person must confirm total fall clearance is sufficient before use, accounting for full lanyard length, shock pack deployment extension, harness stretch, and worker height. Always confirm the worker's total weight including tools and equipment falls within the 60 to 141 kg rated capacity range before use. A deployed shock pack indicates the lanyard has arrested a fall — remove from service immediately and do not reuse. Inspect before every use and retire from service if any damage or defect is detected.