LIFELINE 400LB 25FT ANSI Z359 POLYSTEEL

Product Description

The Peakworks Vertical Polysteel Lifeline is a 25 ft lifeline rated to 400 lb and compliant with ANSI Z359 standards, designed for vertical fall protection applications where enhanced worker capacity, superior rope durability, and compliance with ANSI Z359 fall protection requirements are required. Polysteel rope construction combines a polyester outer braid with an internal steel wire core, delivering the handling flexibility of a synthetic rope alongside the cut resistance, abrasion resistance, and tensile strength of a steel core. ANSI Z359 compliance confirms the lifeline has been designed, tested, and manufactured to meet the performance and safety requirements established by the American National Standards Institute for personal fall arrest system components.

The 400 lb capacity rating accommodates heavier workers or those carrying substantial tools and equipment, making this lifeline appropriate for applications where a standard 310 lb capacity lifeline would be insufficient for the worker's total weight. The 25 ft length provides a practical vertical reach for applications on low-to-moderate height structures including elevated platforms, mezzanines, short communication structures, and similar work environments where the working height falls within the lifeline's coverage. Polysteel construction provides enhanced durability over standard synthetic lifelines in environments where rope contact with sharp edges, abrasive surfaces, or other mechanical hazards is a concern.

This lifeline is intended for use as part of a complete personal fall arrest system with a compatible full-body harness rated for the 400 lb capacity range, a rope grab device rated for polysteel rope and confirmed compatible with the lifeline's diameter, and a suitable anchor point capable of supporting fall arrest loads. The lifeline must be anchored above the work area and the rope grab positioned correctly on the line before work begins. Inspect the full length of the rope before each use for fraying, kinking, core wire protrusion, chemical damage, or any other deterioration, and remove from service immediately if any defects are found.

Material: Polysteel rope (polyester outer braid with steel wire core)

Compatible With: Rope grab devices rated and compatible with polysteel lifeline rope diameter Full-body harnesses with dorsal D-ring fall arrest attachment rated for 400 lb capacity Fall arrest anchor points rated for applicable loads

Uses: Vertical lifeline for personal fall arrest systems requiring 400 lb capacity Elevated platforms, mezzanines, and low-to-moderate height structure applications Applications requiring ANSI Z359 compliant fall protection components Environments where polysteel rope durability is required over standard synthetic lifelines

Key Features: 400 lb capacity for heavier workers and those carrying substantial tools and equipment 25 ft length for low-to-moderate height structure applications Polysteel construction: polyester outer braid with steel wire core ANSI Z359 compliant Enhanced cut and abrasion resistance versus synthetic-only rope

Note: Always confirm the worker's total weight including tools and equipment does not exceed the 400 lb rated capacity before use. Verify rope grab compatibility with polysteel lifeline diameter and construction before use. Confirm all system components are ANSI Z359 compliant when building a compliant fall arrest system. Anchor above the work area to a suitable fall arrest anchor point. Inspect the full rope length before every use and retire from service upon detection of any damage or defect.