LIFELINE 400LB 100FT ANSI Z359 POLYSTEEL

Product Description

The Peakworks Polysteel Lifeline is a 100 ft vertical or horizontal lifeline rated to 400 lb and manufactured to meet ANSI Z359 fall protection standards. Polysteel rope combines a polyester outer braid with a steel wire core, providing the flexibility and handling characteristics of a synthetic rope while adding the strength, cut resistance, and durability of a steel core. This construction makes it well suited for demanding industrial environments where standard synthetic ropes may be vulnerable to abrasion, sharp edges, or mechanical damage.

Compliance with ANSI Z359 ensures the lifeline meets established performance requirements for fall protection equipment used in general industry and construction applications in North America. The 400 lb capacity accommodates a wide range of workers and tool weights, making it appropriate for use in construction, oil and gas, utilities, telecommunications, and general industrial maintenance. The 100 ft length provides substantial vertical reach for multi-story structures, towers, tanks, and other elevated work areas.

This lifeline is intended for use as part of a complete personal fall arrest system in conjunction with a compatible full-body harness, rope grab, and energy absorber or self-retracting lifeline as required by the application. The lifeline must be anchored to a suitable anchor point rated for fall arrest loads before use. Inspect the rope before each use for signs of fraying, kinking, core damage, chemical exposure, or other deterioration, and remove from service immediately if any defects are identified.

Material: Polysteel rope (polyester outer braid with steel wire core)

Compatible With: Compatible rope grab devices rated for polysteel lifelines Full-body harnesses with dorsal D-ring fall arrest attachment Suitable ANSI Z359-compliant anchor points and energy absorbers

Uses: Vertical lifeline for personal fall arrest systems Construction, oil and gas, utilities, and telecommunications work at height Tower, tank, and multi-story structure applications Industrial maintenance requiring extended lifeline reach

Key Features: 400 lb capacity 100 ft length Polysteel construction: polyester outer braid with steel wire core for enhanced cut and abrasion resistance Meets ANSI Z359 fall protection standards Suitable for demanding industrial environments where synthetic-only ropes may be at risk

Note: Always verify rope grab compatibility with polysteel lifeline diameter and construction before use. Anchor to a suitable fall arrest anchor point rated for the required load. Inspect before every use and retire from service upon detection of any damage or defect.