LIFELINE 30FT POLYSTEEL 6000LB V

Product Description

The Peakworks Vertical Polysteel Lifeline is a 30 ft lifeline rated to 6000 lb minimum breaking strength, designed for vertical fall protection applications on low-to-moderate height structures where enhanced rope durability is required. Polysteel rope construction combines a polyester outer braid with an internal steel wire core, delivering the handling flexibility of a synthetic rope alongside the cut resistance, abrasion resistance, and tensile strength of a steel core. This construction makes it well suited for environments where ropes may contact sharp structural edges, abrasive surfaces, or other mechanical hazards that would compromise standard synthetic lifelines.

The 30 ft length is well suited for applications on single-story and low-rise structures, elevated platforms, mezzanines, fixed ladders, and tanks where the working height falls within the lifeline's reach. The 6000 lb minimum breaking strength provides a significant safety margin above the working loads encountered in personal fall arrest applications, making this lifeline appropriate for demanding professional use where a shorter polysteel lifeline is the right fit for the structure and application. The compact length also simplifies rope management and deployment compared to longer variants, reducing excess rope below the working position and minimizing entanglement risk.

This lifeline is intended for use as part of a complete personal fall arrest system with a compatible full-body harness, a rope grab device rated for polysteel rope and confirmed compatible with the lifeline's diameter, and a suitable anchor point capable of supporting fall arrest loads. The lifeline must be anchored above the work area and the rope grab positioned correctly on the line before work begins. Inspect the full length of the rope before each use for fraying, kinking, core wire protrusion, chemical damage, or any other deterioration, and remove from service immediately if any defects are found.

Material: Polysteel rope (polyester outer braid with steel wire core)

Compatible With: Rope grab devices rated and compatible with polysteel lifeline rope diameter Full-body harnesses with dorsal D-ring fall arrest attachment Fall arrest anchor points rated for applicable loads

Uses: Vertical lifeline for personal fall arrest systems on low-to-moderate height structures Elevated platforms, mezzanines, and fixed ladder applications Single-story and low-rise construction and industrial maintenance Tank and low elevated structure applications

Key Features: 6000 lb minimum breaking strength 30 ft length for low-to-moderate height applications Polysteel construction: polyester outer braid with steel wire core Enhanced cut and abrasion resistance versus synthetic-only rope Compact length simplifies rope management and reduces entanglement risk

Note: Always verify rope grab compatibility with polysteel lifeline diameter and construction before use. Anchor above the work area to a suitable fall arrest anchor point. Inspect the full rope length before every use and retire from service upon detection of any damage or defect.