ROPE LIFELINE 100FT POLYSTEEL WHT 6000LB

Product Description

The Peakworks Polysteel Rope Lifeline is a 100 ft vertical lifeline rated to 6000 lb minimum breaking strength, constructed from white polysteel rope combining a polyester outer braid with an internal steel wire core. The white finish allows for easy visual identification on the job site, distinguishing this lifeline from other rope types and colors in use, and facilitating quick inspection for soiling, staining, or contamination that may indicate chemical exposure or other damage. Polysteel construction delivers the handling flexibility of a synthetic rope alongside the cut resistance, abrasion resistance, and tensile strength of a steel core, making it well suited for demanding environments where standard synthetic lifelines may be vulnerable to sharp edges or abrasive surfaces.

The 100 ft length provides substantial vertical reach for applications on tall structures including communication towers, multi-story construction, storage tanks, wind turbines, and industrial facilities. The 6000 lb minimum breaking strength provides a significant safety margin above the working loads encountered in personal fall arrest applications, making this lifeline appropriate for demanding professional use across construction, oil and gas, utilities, telecommunications, and general industrial maintenance. The white polysteel construction may also be specified for applications where color coding of lifelines is used to organize fall protection equipment by user, location, or inspection status.

This lifeline is intended for use as part of a complete personal fall arrest system with a compatible full-body harness, a rope grab device rated for polysteel rope and confirmed compatible with the lifeline's diameter, and a suitable anchor point capable of supporting fall arrest loads. The lifeline must be anchored above the work area and the rope grab positioned correctly on the line before work begins. Inspect the full length of the rope before each use for fraying, kinking, core wire protrusion, chemical damage, discoloration, or any other deterioration, and remove from service immediately if any defects are found.

Material: White polysteel rope (polyester outer braid with steel wire core)

Compatible With: Rope grab devices rated and compatible with polysteel lifeline rope diameter Full-body harnesses with dorsal D-ring fall arrest attachment Fall arrest anchor points rated for applicable loads

Uses: Vertical lifeline for personal fall arrest systems Communication tower, wind turbine, and multi-story construction applications Storage tank and industrial facility work at height Applications where white rope color coding or visual identification is required

Key Features: 6000 lb minimum breaking strength 100 ft length for extended vertical reach White polysteel construction: polyester outer braid with steel wire core White finish for easy visual identification and inspection Enhanced cut and abrasion resistance versus synthetic-only rope

Note: Always verify rope grab compatibility with polysteel lifeline diameter and construction before use. Anchor above the work area to a suitable fall arrest anchor point. Inspect the full rope length before every use, paying particular attention to discoloration or staining that may indicate chemical exposure. Retire from service upon detection of any damage or defect.