LIFELINES 310LB 40FT

Product Description

The Peakworks Lifeline is a 40 ft vertical lifeline rated to 310 lb, designed for use in personal fall arrest systems on structures of moderate height where the working position requires a lifeline of substantial length. The 40 ft length provides coverage for a wide range of elevated work applications including multi-story construction, elevated industrial platforms, communication structures, and similar work environments where the vertical distance from the anchor point to the working position falls within the lifeline's reach. The 310 lb capacity accommodates workers within the specified weight limit including tools and equipment carried on the person.

This lifeline is intended for use as part of a complete personal fall arrest system in conjunction with a compatible full-body harness, a rope grab device compatible with the lifeline rope diameter and construction, and a suitable anchor point rated for fall arrest loads. The lifeline must be anchored above the work area and the rope grab positioned correctly on the line before work begins. At 40 ft in length, rope management during deployment and retrieval should be planned to prevent kinking, tangling, or contact with abrasive surfaces or sharp edges along the rope's length. Fall clearance below the worker must be confirmed to be sufficient for the fall arrest system being used, accounting for rope grab travel, energy absorber deployment if applicable, harness stretch, and worker height.

Inspect the full length of the lifeline before each use for fraying, kinking, chemical damage, discoloration, or any other signs of deterioration. Remove from service immediately if any defects are identified. Always follow applicable fall protection regulations and the manufacturer's instructions when deploying this lifeline, and ensure a competent person has evaluated the fall clearance and system configuration before work begins.

Material: Rope construction (verify specific rope material and diameter with Peakworks product documentation)

Compatible With: Rope grab devices compatible with lifeline rope diameter and construction Full-body harnesses with dorsal D-ring fall arrest attachment Fall arrest anchor points rated for applicable loads

Uses: Vertical lifeline for personal fall arrest systems on moderate to tall structures Multi-story construction and elevated industrial platform applications Communication structure and similar elevated work environments Work areas requiring substantial lifeline length within the 310 lb capacity rating

Key Features: 310 lb capacity 40 ft length for moderate to tall structure coverage For use as part of a complete personal fall arrest system Practical length for a wide range of elevated work applications

Note: Always confirm the worker's total weight including tools and equipment does not exceed the 310 lb rated capacity before use. Plan rope deployment and management to prevent kinking, tangling, or abrasive surface contact. A competent person must confirm total fall clearance is sufficient before use. Verify rope grab compatibility with lifeline rope diameter and construction before use. Inspect the full rope length before every use and retire from service upon detection of any damage or defect.