LIFELINES 310LB 18FT

Product Description

The Peakworks Lifeline is an 18 ft vertical lifeline rated to 310 lb, designed for use in personal fall arrest systems where a short-to-moderate lifeline length is appropriate for the structure height and work area configuration. The 18 ft length is well suited for applications on single-story structures, elevated platforms, mezzanines, fixed ladders with limited vertical runs, and other work areas where a longer lifeline would create excessive slack, rope management challenges, or entanglement risk. The 310 lb capacity accommodates workers within the specified weight limit including tools and equipment carried on the person.

This lifeline is intended for use as part of a complete personal fall arrest system in conjunction with a compatible full-body harness, a rope grab device compatible with the lifeline rope diameter and construction, and a suitable anchor point rated for fall arrest loads. The lifeline must be anchored above the work area and the rope grab positioned correctly on the line before work begins. The 18 ft length reduces the amount of free rope below the working position compared to longer lifeline variants, minimizing entanglement risk and improving rope management in moderately confined or cluttered work environments.

Inspect the lifeline before each use for fraying, kinking, chemical damage, discoloration, or any other signs of deterioration. Remove from service immediately if any defects are identified. Always confirm that total fall clearance below the worker is sufficient for the fall arrest system being used, accounting for rope grab travel, energy absorber deployment if applicable, harness stretch, and worker height. Follow all applicable fall protection regulations and the manufacturer's instructions when deploying this lifeline as part of a fall arrest system.

Material: Rope construction (verify specific rope material and diameter with Peakworks product documentation)

Compatible With: Rope grab devices compatible with lifeline rope diameter and construction Full-body harnesses with dorsal D-ring fall arrest attachment Fall arrest anchor points rated for applicable loads

Uses: Vertical lifeline for personal fall arrest systems Single-story structures, elevated platforms, and mezzanine applications Fixed ladder applications with limited vertical runs Work areas where rope management and entanglement risk must be minimized

Key Features: 310 lb capacity 18 ft length for short-to-moderate height applications For use as part of a complete personal fall arrest system Suitable for single-story and low elevated structure applications where a compact lifeline length is preferred

Note: Verify rope grab compatibility with lifeline rope diameter and construction before use. Confirm total fall clearance below the work position is sufficient for the fall arrest system being used. Inspect before every use and retire from service upon detection of any damage or defect.