LANYARD WRIST CARABINER 13 IN L

Product Description

The Peakworks Wrist Lanyard is a 13 in short-length lanyard fitted with a carabiner connector, designed to secure tools, equipment, or devices to a worker's wrist to prevent dropped object incidents at height. Dropped tools and equipment are a significant hazard on elevated work sites, posing serious injury risk to workers and bystanders below. This wrist lanyard provides a simple and effective means of tethering hand tools and small equipment directly to the worker, ensuring that if an item is released or dropped, it remains captured and does not become a falling object hazard.

The 13 in length keeps the tethered tool close to the hand and wrist, minimizing swing and pendulum effect while still allowing natural hand movement during work. The carabiner connector provides a secure, positive-locking attachment point that can be quickly connected and disconnected from compatible tool attachment points, tool loops, or D-rings on gloves and wrist straps. This lanyard is well suited for use in construction, telecommunications, tower climbing, industrial maintenance, and any other elevated work environment where dropped object prevention is required.

Inspect the lanyard before each use for webbing wear, fraying, stitching damage, or hardware defects including carabiner gate function and locking mechanism integrity. Remove from service immediately if any defects are identified. Always match the lanyard's load rating to the weight of the tool or equipment being tethered, and never use a tool lanyard as a personal fall arrest component.

Material: Webbing or cord construction (verify specific material with Peakworks product documentation) Carabiner connector

Compatible With: Compatible tool attachment points, tool loops, and wrist strap D-rings Hand tools and small equipment with suitable tether attachment points

Uses: Wrist-worn tool tethering to prevent dropped object incidents at height Construction, telecommunications, and tower climbing applications Industrial maintenance and elevated work environments Dropped object prevention programs

Key Features: 13 in length for close, low-swing tool tethering at the wrist Carabiner connector for secure, positive-locking, quick-connect attachment Designed to prevent dropped tool and equipment incidents at height Suitable for construction, tower climbing, and industrial maintenance applications

Note: Never use this wrist lanyard as a personal fall arrest component. Always verify the lanyard's load rating is appropriate for the tool or equipment being tethered. Inspect before every use and retire from service if any damage or defect is detected.