Lebus L-180 Spectrum 8 Winchline Tail Chain - 1 in - 18 in - 47700 lb

Description du produit

The Lebus L-180 Spectrum 8 Series Winchline Tail Chain is a heavy-duty alloy steel tail chain assembly designed for use in heavy haul, over-dimensional transport, and industrial load securement applications requiring a rated working load limit of 47,700 lb, identified by a 1 inch chain size and 18 inch working length. The winchline tail chain is the chain section that connects the winch line wire rope or strap to the load securement anchor point — typically a chain hook, load ring, or tie-down point on the trailer or load — bridging the connection between the winch tensioning system and the fixed chain anchor and completing the load securement assembly. The tail chain must be rated to the full working load of the securement assembly and must be compatible in size and grade with the hooks, rings, and other hardware used in the assembly.

The 1 inch size designation identifies the chain link wire diameter, confirming this tail chain is designed for use in the most demanding heavy haul and over-dimensional load securement assemblies using 1 inch Grade 8 alloy chain hardware. The 18 inch length specifies the overall working length of this tail chain assembly — shorter than the 24 inch variant of the same 1 inch Spectrum 8 tail chain — providing a more compact reach between the winch line termination and the anchor point where the securement configuration requires a shorter tail chain length. Both the 18 inch and 24 inch variants share the same 47,700 lb working load limit and 1 inch Grade 8 alloy steel specification, with the length selection determined by the specific securement geometry and trailer configuration of the application.

The Spectrum 8 Series designation identifies this as part of Lebus's premium Grade 8 alloy steel chain product line, providing the highest working load limits available in standard transport chain grades at the 1 inch chain size. Grade 8 alloy chain delivers the strength-to-weight ratio and fatigue resistance required for the most demanding heavy haul and over-dimensional load securement applications, and at 47,700 lb working load limit this tail chain is suited to securing the heaviest loads encountered in over-dimensional and super-heavy haul transport.

The winchline tail chain must be inspected before each use for cracks, deformation, elongation, wear at the chain links and hook attachment points, and any condition that reduces the cross-sectional area of the chain wire below the manufacturer's minimum allowable limit. Tail chains showing any signs of damage, deformation, or wear must be removed from service immediately and replaced.

Material: Alloy steel — Grade 8 (Spectrum 8 Series) Working Load Limit: 47,700 lb Chain Size: 1 in Length: 18 in

Compatible With: 1 in alloy chain load securement hardware and hooks Winch line load securement systems on heavy haul, lowboy, and over-dimensional trailers Series: L-180 Spectrum 8

Uses: Connecting winch line wire rope or strap to chain anchor points in heavy haul and over-dimensional load securement assemblies requiring a compact 18 in tail chain length Super-heavy haul and over-dimensional transport load securement requiring 47,700 lb rated tail chain Flatbed and lowboy trailer load securement in applications requiring 1 in Grade 8 alloy chain hardware Replacement of worn, damaged, or undersized tail chain in high-capacity winchline load securement assemblies

Key Features: Lebus L-180 Spectrum 8 Series winchline tail chain Grade 8 alloy steel construction 47,700 lb working load limit 1 in chain size 18 in length — compact variant for configurations requiring shorter tail chain reach Same WLL and grade specification as the 24 in variant, optimized for shorter securement geometry Compatible with 1 in Grade 8 rated hooks and load securement hardware

Note: Always inspect winchline tail chains before each use and remove from service immediately if any damage, deformation, elongation, or wear is identified. Never exceed the rated working load limit of 47,700 lb. Always use with hardware of equivalent or greater working load limit and compatible chain size and grade. Load securement must comply with applicable federal and provincial transport regulations including FMCSA and Transport Canada cargo securement standards. Never repair or modify a damaged tail chain — replace with a new assembly of the correct size, grade, and working load limit.