Lebus L-180 Spectrum 8 Winchline Tail Chain - 1 in - 24 in - 47700 lb

Description du produit

The Lebus L-180 Spectrum 8 Series Winchline Tail Chain is a heavy-duty alloy steel tail chain assembly designed for use in heavy haul, over-dimensional transport, and industrial load securement applications requiring a rated working load limit of 47,700 lb. The winchline tail chain is the chain section that connects the winch line wire rope or strap to the load securement anchor point — typically a chain hook, load ring, or tie-down point on the trailer or load — bridging the connection between the winch tensioning system and the fixed chain anchor and completing the load securement assembly. The tail chain must be rated to the full working load of the securement assembly and must be compatible in size and grade with the hooks, rings, and other hardware used in the assembly.

The 1 inch size designation identifies the chain link wire diameter, confirming this tail chain is designed for use in the most demanding heavy haul and over-dimensional load securement assemblies using 1 inch alloy chain hardware. The 24 inch length specifies the overall working length of the tail chain assembly, providing the correct reach between the winch line termination and the anchor point in standard heavy haul securement configurations. At 47,700 lb working load limit, this is the highest-capacity tail chain in the Lebus L-180 Spectrum 8 Series range covered in this catalog, rated for the most demanding over-dimensional and super-heavy haul transport securement applications where maximum chain working load capacity is required.

The Spectrum 8 Series designation identifies this as part of Lebus's premium Grade 8 alloy steel chain product line. Grade 8 alloy chain provides the highest working load limits available in standard transport chain grades at equivalent chain sizes, delivering the strength-to-weight ratio and fatigue resistance required for the most demanding heavy haul and over-dimensional load securement applications. At the 1 inch chain size and 47,700 lb working load limit, this tail chain is suited to securing the heaviest loads encountered in over-dimensional and super-heavy haul transport, where the working load requirements exceed the capacity of smaller chain sizes or lower chain grades. Compared to the 7/8 inch Spectrum 8 tail chain rated at 34,200 lb, the 1 inch Spectrum 8 provides approximately 39% greater working load capacity, making it the correct specification for the heaviest securement assemblies in the L-180 Spectrum 8 range.

The winchline tail chain must be inspected before each use for cracks, deformation, elongation, wear at the chain links and hook attachment points, and any condition that reduces the cross-sectional area of the chain wire below the manufacturer's minimum allowable limit. Tail chains showing any signs of damage, deformation, or wear must be removed from service immediately and replaced.

Material: Alloy steel — Grade 8 (Spectrum 8 Series) Working Load Limit: 47,700 lb Chain Size: 1 in Length: 24 in

Compatible With: 1 in alloy chain load securement hardware and hooks Winch line load securement systems on heavy haul, lowboy, and over-dimensional trailers Series: L-180 Spectrum 8

Uses: Connecting winch line wire rope or strap to chain anchor points in heavy haul and over-dimensional load securement assemblies Super-heavy haul and over-dimensional transport load securement requiring 47,700 lb rated tail chain Flatbed and lowboy trailer load securement in applications requiring 1 in Grade 8 alloy chain hardware Replacement of worn, damaged, or undersized tail chain in high-capacity winchline load securement assemblies

Key Features: Lebus L-180 Spectrum 8 Series winchline tail chain Grade 8 alloy steel construction 47,700 lb working load limit 1 in chain size 24 in length Highest-capacity L-180 Spectrum 8 tail chain for super-heavy haul and over-dimensional transport Compatible with 1 in Grade 8 rated hooks and load securement hardware

Note: Always inspect winchline tail chains before each use and remove from service immediately if any damage, deformation, elongation, or wear is identified. Never exceed the rated working load limit of 47,700 lb. Always use with hardware of equivalent or greater working load limit and compatible chain size and grade. Load securement must comply with applicable federal and provincial transport regulations including FMCSA and Transport Canada cargo securement standards. Never repair or modify a damaged tail chain — replace with a new assembly of the correct size, grade, and working load limit.