MANILLE DE LEVAGE POUR PINCE VERTICALE 2 TONNES

Description du produit

The Renfroe Lifting Shackle for Vertical Clamp is a genuine OEM replacement shackle designed specifically for use with Renfroe Vertical series lifting clamps. This shackle serves as the primary connection point between the vertical clamp and the overhead rigging hardware, transferring the full working load from the clamp to the hoist, hook, sling, or chain assembly above it. The dimensions and load geometry of this shackle are specific to the Vertical clamp series, ensuring correct fit at the clamp bail, proper vertical load alignment, and full compatibility with the clamp body and rigging interface for which it was engineered.

In vertical lifting applications, the shackle is loaded in direct tension with every lift, placing consistent and significant stress on the bow, pin, and thread engagement with each cycle. In high-production environments such as steel mills, plate processing facilities, and heavy fabrication shops, this loading is repeated continuously throughout the working day, accelerating wear at the pin and bow contact surfaces and increasing the potential for fatigue over time. Elongation of the bow, wear at the rigging contact point, thread damage, surface cracking, or any visible deformation are conditions that require the shackle to be immediately removed from service and replaced with a genuine Renfroe OEM part before the clamp is returned to use.

Genuine Renfroe lifting shackles for vertical clamps are manufactured to the original dimensional and material specifications, ensuring correct fit with the Vertical clamp body and full compatibility with standard overhead rigging hardware. This component is intended for use by qualified rigging and maintenance personnel and should always be selected based on the working load limit of the specific Vertical clamp model and the total load requirements of the lifting application.

Material: Alloy steel

Compatible With: Renfroe Vertical series lifting clamps (confirm specific clamp model and working load limit for correct shackle selection) Standard overhead rigging hardware including hooks, slings, chains, and hoist assemblies

Uses: Primary load transfer connection between Renfroe Vertical clamps and overhead rigging hardware Single-leg and multi-leg vertical plate lifting applications Steel mill, fabrication shop, and plate processing facility operations Replacement shackle for scheduled clamp maintenance and inspection programs

Key Features: Genuine Renfroe OEM replacement shackle for Vertical clamp series Dimensioned specifically for correct fit and vertical load alignment with Vertical clamp body Loaded in direct tension with every lift cycle requiring consistent pre-use inspection Manufactured to original dimensional and material specifications Compatible with standard overhead rigging hardware within the rated working load limit

Note: Inspect the shackle body, pin, and threads before every use. Remove from service immediately if wear, elongation, cracking, thread damage, or deformation is detected. Never exceed the rated working load limit. Ensure the pin is fully threaded and secured before lifting. Confirm the specific Renfroe Vertical clamp model and working load limit before ordering to ensure the correct shackle is selected.