POUTRE D'ÉCARTEMENT 4000 LBS RÉGLABLE

Product Description

The Caldwell Adjustable Spreader Beam is a versatile below-the-hook lifting device engineered for industrial crane and hoist applications requiring controlled two-point load spreading. Rated at 4000 lb working load limit, this spreader beam provides the flexibility of an adjustable length design, allowing the rigger to match the beam to the specific load width and rigging geometry required for each lift without the need for multiple fixed-length beams.

Spreader beams are used to convert a single-point crane hook connection into a two-point lift, distributing the load evenly across two lower attachment points while eliminating the inward compression forces on the load that would result from using slings in a standard two-leg bridle configuration. This makes the Caldwell adjustable spreader beam well suited for lifting long, wide, or structurally sensitive loads such as fabricated assemblies, structural components, machinery, panels, and other industrial items where load integrity and controlled lift geometry must be maintained throughout the operation.

The adjustable design provides operational flexibility across a range of load widths, reducing equipment inventory requirements and improving efficiency for facilities that handle varied load sizes. As a Caldwell product, this spreader beam is built to the dimensional and performance standards associated with the Caldwell line of below-the-hook lifting devices.

All rigging hardware used in conjunction with this spreader beam, including slings, shackles, and the overhead crane hook, must be rated to meet or exceed the 4000 lb working load limit of the beam. The complete rigging assembly should be configured and operated in accordance with Caldwell's specifications and applicable below-the-hook lifting device standards.

Material: Steel alloy

Compatible With: Overhead crane and hoist systems rated for 4000 lb or greater capacity Slings, shackles, and rigging hardware rated for 4000 lb or greater working load limit Loads with attachment point spacing within the beam's adjustable length range

Uses: Two-point lifting of long, wide, or structurally sensitive loads Fabricated assemblies, structural components, machinery, and panel lifting Applications requiring elimination of inward compression forces on the load Crane and hoist operations requiring an adjustable spreader beam

Key Features: 4000 lb working load limit Adjustable length design for versatile load width accommodation Two-point load spreading for controlled and stable lifts Eliminates inward compression forces associated with standard bridle sling configurations Reduces need for multiple fixed-length beams across varied load sizes

Note: Specifications including material grade, finish, adjustable length range, adjustment mechanism details, and attachment hardware should be confirmed against the official Caldwell product catalog or manufacturer documentation prior to ordering. All rigging hardware must be rated to match or exceed the spreader beam's working load limit.