POUTRE DE LEVAGE RÉGLABLE 1-1/4 TONNE X 6 PIEDS

Product Description

The Caldwell Adjustable Lifting Beam is a below-the-hook lifting device rated at 1-1/4 Ton working load limit with a maximum spread of 6 ft, engineered for crane and hoist applications requiring a rigid two-point lift configuration across a range of load widths. The adjustable design allows the beam length to be set within its range up to 6 ft, enabling the rigger to match the beam spread to the specific attachment point spacing of the load without the need for multiple fixed-length beams.

The lifting beam provides a rigid structural member that connects the single upper crane hook attachment to two lower load attachment points, distributing the load and eliminating the inward compression forces on the load that would result from sling-based rigging in a standard two-leg bridle configuration. At 1-1/4 Ton working load limit, this beam is well suited for light to medium industrial lifting tasks involving machinery, fabricated assemblies, equipment, and other loads with two attachment points spaced within the beam's adjustable range, in applications where load integrity and controlled lift geometry are required.

The adjustable configuration reduces equipment inventory requirements and improves operational flexibility for facilities that handle varied load sizes with attachment point spacings within the beam's range. As a Caldwell product, this adjustable lifting beam is built to the dimensional and performance standards associated with the Caldwell line of below-the-hook lifting devices, and should be operated in accordance with Caldwell's specifications and applicable below-the-hook lifting device standards including ASME B30.20.

Material: Steel alloy

Compatible With: Overhead crane and hoist systems rated to meet or exceed the 1-1/4 Ton working load limit Slings, shackles, and rigging hardware rated to meet or exceed the 1-1/4 Ton working load limit Loads with two attachment points spaced within the beam's adjustable range up to 6 ft

Uses: Two-point lifting of loads with attachment point spacing within the adjustable range up to 6 ft Machinery, equipment, and fabricated assembly lifting requiring adjustable beam spread at 1-1/4 Ton capacity Applications requiring elimination of inward compression forces with a rigid two-point lift configuration Facilities handling varied load sizes requiring beam length flexibility within the 6 ft range

Key Features: 1-1/4 Ton working load limit Adjustable length up to 6 ft maximum spread Rigid beam construction eliminates inward compression forces on the load Reduces need for multiple fixed-length beams across varied load attachment point spacings Built to Caldwell's below-the-hook lifting device standards

Note: Specifications including minimum spread dimension, adjustment increment details, lower attachment point hardware, and compatible rigging hardware should be confirmed against the official Caldwell product catalog or manufacturer documentation prior to ordering. The lifting beam must only be used within its 1-1/4 Ton rated working load limit and operated in full accordance with Caldwell's instructions and applicable lifting device safety standards.