Nova Beam Clamp - 10t

Product Description

The Nova Beam Clamp is a fixed-jaw suspension clamp designed for attaching hoists, blocks, and lifting equipment to structural steel beams in overhead lifting applications. Built to a working load limit of 10 Ton, this clamp is suited for use in manufacturing plants, fabrication shops, warehouses, shipyards, oilfield facilities, and construction sites where a permanent or semi-permanent overhead lifting point is required on an existing beam structure. The clamp attaches directly to the bottom flange of a structural steel beam without the need for drilling, welding, or permanent modification to the beam.

The Nova Beam Clamp is designed for use with chain blocks, lever hoists, electric chain hoists, and other lifting equipment suspended from its load hook or shackle attachment point. The clamp body is constructed of forged or fabricated steel to withstand the full rated working load limit under vertical loading conditions. The clamping mechanism is tightened securely against the beam flange to prevent lateral movement or displacement during lifting operations, and the clamp must be positioned and tightened in accordance with the manufacturer's instructions prior to use.

Beam clamps are intended for vertical lift applications only and must be matched to a compatible beam flange width and thickness range as specified by the manufacturer. The Nova Beam Clamp is suited for use on standard structural steel I-beams and wide-flange sections within the rated flange size range. Always verify that the supporting beam is rated to carry the combined weight of the clamp, hoist, rigging, and load before use.

Material: Steel construction

Compatible With: Chain blocks, lever hoists, and electric chain hoists within the rated capacity Standard structural steel I-beams and wide-flange sections within rated flange size range Shackles and suspension hardware rated to 10 Ton or greater

Uses: Overhead lifting point attachment to structural steel beams Suspension of hoists and lifting equipment in manufacturing, fabrication, and construction environments Temporary or semi-permanent overhead rigging setups where beam drilling or welding is not permitted

Key Features: 10 Ton working load limit Attaches to structural steel beam flanges without drilling or welding Compatible with chain blocks, lever hoists, and electric chain hoists Steel construction for heavy-duty industrial service Vertical lift applications only

Note: Always verify beam flange width and thickness compatibility before installation. Do not use for angular or side loading. Tighten clamping mechanism fully before applying load. Inspect clamp and beam flange condition before each use.