5t - Nova Universal Plate Lifting Clamp

Product Description

The Nova Universal Plate Lifting Clamp is a steel plate clamp designed for both vertical and horizontal lifting of flat steel plates, structural steel, and similar flat materials. The universal configuration allows the clamp to be used in either orientation without requiring a separate tool for each application, making it a versatile choice for facilities that handle plate in multiple configurations. The clamping mechanism engages the plate edge securely under load, with grip force increasing as the load weight increases, providing a self-locking action that maintains a secure hold throughout the lift.

Rated to a working load limit of 5 Ton, this clamp features a jaw opening range of 0 to 1.97 inches, accommodating a wide range of plate thicknesses within that span. It is designed for use on materials with a maximum hardness of 30 HRC (285 HV or 300 HB), covering the majority of standard structural and mild steel plate applications. A minimum working load of 20% of the maximum WLL must be maintained during use to ensure the clamping mechanism remains properly engaged and the load is held securely throughout the operation.

Nova Universal Plate Lifting Clamps are suited for use in steel service centers, fabrication shops, shipyards, construction sites, and heavy industrial environments where plate needs to be lifted, repositioned, or transported in either a vertical or horizontal orientation. The clamp is designed to be attached and released without specialized tooling and provides a reliable, controlled method for plate handling when used with appropriate overhead lifting equipment of matching or greater capacity.

Material: Steel construction

Compatible With: Flat steel plate and structural steel within jaw opening range Overhead hoists, cranes, and lifting equipment rated to 5 Ton or greater Spreader beams and horizontal lifting rigs (when used in horizontal configuration) Materials with maximum hardness of 30 HRC (285 HV or 300 HB)

Uses: Vertical and horizontal lifting and handling of flat steel plate Steel service center and fabrication shop material handling Shipyard and heavy construction plate positioning Multi-orientation plate handling without tool changes

Key Features: 5 Ton working load limit Universal design for both vertical and horizontal lifting Jaw opening range: 0 to 1.97 inches Maximum material hardness: 30 HRC (285 HV or 300 HB) Minimum working load: 20% of maximum WLL Self-locking clamping action increases grip under load

Note: Always ensure the overhead lifting equipment is rated to the full working load limit of the clamp before use. When used for horizontal lifting, always use a matched pair with a suitable spreader beam or lifting frame to ensure load balance and stability.