PINCE À PLAQUE 1/2 TONNE LEVAGE 1/2 - 1 OUVERTURE

Product Description

The Renfroe 1/2 Ton Plate Clamp with 1/2-1 jaw opening is a cam-action lifting clamp designed for the vertical lifting and handling of flat steel plate and structural material within its rated jaw opening range. The self-tightening cam mechanism engages the workpiece as the load is applied, generating clamping force that increases proportionally with the weight of the load and providing a secure, reliable grip throughout the lift. The 1/2-1 inch jaw opening range is suited for handling plate stock in the light to medium thickness range, making this clamp a practical complement to models covering thinner material within the Renfroe plate clamp lineup.

Rated at 1/2 Ton working load limit, this clamp is designed for single-leg vertical lifts where the load hangs freely and the clamp remains in a vertical orientation throughout the operation. The 1/2-1 inch jaw opening range allows the cam to engage effectively across plate thicknesses from 1/2 inch up to 1 inch, maintaining consistent clamping force and jaw contact throughout the lift. Selecting the correct clamp based on actual material thickness within this jaw opening range, surface condition, and total load weight is essential to safe and reliable lifting performance.

Renfroe plate clamps are recognized throughout the steel industry for their durability, consistent performance, and reliability under the demands of repeated industrial use. This clamp is built to withstand the rigors of fabrication shops, steel service centers, plate processing facilities, and general industrial plate handling applications where dependable, properly rated lifting equipment is essential to maintaining safe and productive operations.

Material: Alloy steel

Uses: Vertical lifting and handling of light to medium thickness flat steel plate Fabrication shop and steel service center plate handling Single-leg vertical lifts of material within the 1/2-1 jaw opening range General industrial plate handling and positioning

Key Features: 1/2 Ton working load limit 1/2-1 inch jaw opening range for light to medium plate thicknesses Self-tightening cam action increases grip proportionally with applied load Designed for single-leg vertical lifting orientation Robust alloy steel construction for repeated industrial use

Note: This clamp is designed for vertical lifting only. Do not use for horizontal transport or tilting without confirming the clamp is rated and configured for that application. Always verify material thickness is within the 1/2-1 inch jaw opening range before use. Do not exceed the 1/2 Ton working load limit. Inspect before each lift.