HARNESS SAF 3-PT ADJUSTMENT UNIV 400LB

Description du produit

The Peakworks Safety Harness is a universal-fit full-body harness rated to 400 lb, featuring a 3-point adjustment system designed to provide a secure and adaptable fit for heavier workers across a wide range of body sizes in demanding work-at-height applications. The 3-point adjustment system allows the harness to be sized and fitted at three key adjustment points, providing a customizable fit across a broad range of worker body sizes within the universal sizing range while ensuring the harness is correctly positioned at critical contact and connection points. Universal sizing combined with 3-point adjustment makes this harness straightforward to fit and deploy across a range of heavier workers, supporting efficient harness donning and adjustment on active worksites.

The 400 lb capacity rating accommodates heavier workers or those carrying substantial tools and equipment, where a standard 310 lb capacity harness would be insufficient for the worker's total weight. Universal sizing combined with 400 lb capacity makes this harness a practical choice for worksites where a single harness model must fit a range of heavier workers, reducing the need to stock multiple size-specific high-capacity harnesses. The 3-point adjustment system provides a balance of fit customization and simplicity, making it well suited for applications where ease of adjustment and quick donning are priorities alongside the need for high-capacity fall arrest performance.

This harness must be used as part of a complete personal fall arrest system with compatible connecting subsystems and anchor points rated for the 400 lb capacity range. All lanyards, self-retracting lifelines, rope grabs, and anchor points used with this harness must be rated for and compatible with the 400 lb capacity requirement. Inspect the harness before each use for webbing wear, fraying, cuts, chemical damage, discoloration, buckle and hardware defects, and stitching integrity. Remove from service immediately if any defects are identified or if the harness has been subjected to fall arrest forces.

Material: Webbing construction (verify specific material with Peakworks product documentation) Hardware (verify specific buckle and hardware material with Peakworks product documentation)

Compatible With: Shock-absorbing lanyards, self-retracting lifelines, and rope grab devices rated for 400 lb capacity Fall arrest anchor points rated for applicable loads

Uses: Full-body harness for personal fall arrest systems requiring 400 lb capacity Construction, industrial maintenance, and general work-at-height applications for heavier workers Worksites requiring a single universal-fit harness to accommodate a range of heavier workers Applications where 3-point adjustment provides a balance of fit customization and ease of donning

Key Features: Universal sizing for a wide range of worker body sizes 400 lb capacity rating for heavier workers and those carrying substantial tools and equipment 3-point adjustment system for customizable fit across the universal size range Dorsal D-ring fall arrest attachment point

Note: Always confirm the worker's total weight including tools and equipment does not exceed the 400 lb rated capacity before use. All connecting subsystems and anchor points must be rated for and compatible with the 400 lb capacity requirement. Always inspect and properly adjust the harness at all three adjustment points before each use, verifying the dorsal D-ring is centered between the shoulder blades and all straps are snug and correctly positioned. A harness that has been subjected to fall arrest forces must be removed from service immediately and must not be reused. Inspect before every use and retire from service if any damage, defect, or fall arrest event is detected.