LNYD SHOCK ABSORBING 110TO220LB 2.5FT

Description du produit

The Peakworks Shock-Absorbing Lanyard is a 2.5 ft fall arrest lanyard featuring an integrated energy absorber, designed for workers within the 110 to 220 lb capacity range. The energy absorber deploys during a fall arrest event, tearing open in a controlled manner to dissipate kinetic energy and limit the maximum arrest force transmitted to the worker's body to levels within established safety thresholds. This energy-absorbing function is a critical element of a compliant personal fall arrest system, protecting the worker from injury caused by the sudden deceleration forces of fall arrest.

The specified capacity range of 110 to 220 lb makes this lanyard appropriate for lighter workers or applications where the user's combined body and equipment weight falls within this range. The 2.5 ft length is the most compact configuration in the shock-absorbing lanyard lineup, designed for applications where minimizing fall distance and total fall clearance requirements is the primary concern. This ultra-short lanyard is particularly well suited for use with overhead anchor points positioned directly above the worker, where the short connection distance keeps the worker as close to the anchor as possible and reduces the total fall distance to the minimum achievable with a shock-absorbing lanyard of this type.

This lanyard must be connected to the dorsal D-ring of a compatible full-body harness and to a suitable anchor point rated for fall arrest loads. Even with a 2.5 ft lanyard, sufficient fall clearance below the worker must be confirmed before use, accounting for lanyard length, energy absorber deployment extension, harness stretch, and worker height — a short lanyard does not eliminate the need for fall clearance evaluation. Inspect the lanyard and energy absorber before each use for webbing wear, fraying, stitching damage, chemical exposure, hardware defects, and energy absorber deployment indicators. Remove from service immediately if the energy absorber has been deployed or if any defects are identified.

Material: Webbing construction (verify specific material with Peakworks product documentation) Integrated energy absorber pack Steel or alloy snap hooks or carabiners (verify connector type and material with Peakworks product documentation)

Compatible With: Full-body harnesses with dorsal D-ring fall arrest attachment Fall arrest anchor points rated for applicable loads

Uses: Single-leg fall arrest lanyard for personal fall arrest systems requiring minimum fall distance Applications with overhead anchor points positioned directly above the worker Construction, industrial maintenance, and general work-at-height applications where compact lanyard length is critical Suitable for workers within the 110 to 220 lb capacity range

Key Features: 2.5 ft length for minimum fall distance and compact deployment Capacity range: 110 to 220 lb Integrated energy absorber to limit maximum arrest force during fall arrest Single-leg configuration for general fall arrest applications Most compact shock-absorbing lanyard configuration for overhead anchor applications

Note: Always confirm the worker's total weight including tools and equipment falls within the 110 to 220 lb rated capacity range before use. A short lanyard does not eliminate the need for fall clearance evaluation — confirm sufficient fall clearance below the work position before use, accounting for lanyard length, energy absorber deployment extension, harness stretch, and worker height. A deployed energy absorber indicates the lanyard has arrested a fall — remove from service immediately and do not reuse. Inspect before every use and retire from service if any damage or defect is detected.