LNYD SHOCK ABSORBING 1800LB 18FT

Description du produit

The Peakworks Shock-Absorbing Lanyard is an 18 ft fall arrest lanyard rated to 1800 lb, featuring an integrated energy absorber designed for specialized fall arrest applications requiring extended reach and high-capacity connection strength. The energy absorber deploys during a fall arrest event, tearing open in a controlled manner to dissipate kinetic energy and limit the maximum arrest force transmitted to the worker's body to levels within established safety thresholds. The 1800 lb capacity rating reflects the connection strength of the lanyard hardware and construction, making it appropriate for demanding industrial and structural applications where high-load-rated components are specified.

The 18 ft length provides substantially greater reach than standard 4 ft or 6 ft fall arrest lanyards, making this lanyard suited for specialized applications such as leading edge work, specific structural steel erection configurations, or other work scenarios where the geometry of the work area requires a longer connection between the anchor point and the worker's harness dorsal D-ring. Fall clearance calculations are especially critical with an 18 ft lanyard — the total fall distance in the event of a fall arrest will be significantly greater than with shorter lanyards, and sufficient clearance below the work position must be confirmed by a competent person before work begins, accounting for full lanyard extension, energy absorber deployment, harness stretch, and worker height.

This lanyard must be connected to the dorsal D-ring of a compatible full-body harness and to a suitable anchor point rated for fall arrest loads. Inspect the lanyard and energy absorber before each use for webbing wear, fraying, stitching damage, chemical exposure, hardware defects, and energy absorber deployment indicators. Remove from service immediately if the energy absorber has been deployed or if any defects are identified. This lanyard is intended for use by competent persons who have evaluated the specific fall clearance and system requirements of the application.

Material: Webbing construction (verify specific material with Peakworks product documentation) Integrated energy absorber pack Steel or alloy snap hooks or carabiners (verify connector type and material with Peakworks product documentation)

Compatible With: Full-body harnesses with dorsal D-ring fall arrest attachment rated for applicable loads Fall arrest anchor points rated for applicable loads

Uses: Extended-reach fall arrest lanyard for specialized fall protection applications Leading edge work and structural steel erection configurations requiring longer lanyard reach Industrial applications where high-capacity, extended-length fall arrest lanyards are specified Applications where work area geometry requires greater connection distance between anchor and harness

Key Features: 18 ft length for extended reach in specialized fall arrest applications 1800 lb capacity rating Integrated energy absorber to limit maximum arrest force during fall arrest Single-leg configuration

Note: Fall clearance calculations are critical with this lanyard due to its 18 ft length. A competent person must confirm total fall clearance is sufficient before use, accounting for full lanyard extension, energy absorber deployment, harness stretch, and worker height. The substantially greater fall distance associated with an 18 ft lanyard must be fully evaluated before committing to this configuration. A deployed energy absorber indicates the lanyard has arrested a fall — remove from service immediately and do not reuse. Inspect before every use and retire from service if any damage or defect is detected.