HARN SHOCK ABSORBING 110TO220LB

Description du produit

The Peakworks Shock-Absorbing Harness Lanyard is a fall arrest lanyard featuring an integrated energy absorber, designed for direct attachment to a compatible full-body harness for workers within the 110 to 220 lb capacity range. The energy absorber deploys during a fall arrest event, tearing open in a controlled manner to dissipate kinetic energy and limit the maximum arrest force transmitted to the worker's body to levels within established safety thresholds. The harness-integrated configuration keeps the lanyard connected directly to the harness rather than to a separate anchor or connecting point, providing a streamlined fall arrest connection for specific work-at-height applications where this attachment method is appropriate.

The specified capacity range of 110 to 220 lb makes this lanyard appropriate for lighter workers or applications where the user's combined body and equipment weight falls within this range. Selecting a lanyard with the correct capacity range for the worker's weight is essential to ensure the energy absorber deploys correctly and limits arrest forces as designed. The harness attachment configuration is suited for applications where the lanyard is intended to remain connected to the harness as part of an integrated fall arrest system, reducing the steps required to connect and disconnect the fall arrest system during transitions between work positions or anchor points.

This lanyard must be connected to the appropriate attachment point of a compatible full-body harness as directed by the manufacturer's instructions and to a suitable anchor point rated for fall arrest loads. Sufficient fall clearance below the worker must be confirmed before use, accounting for lanyard length, energy absorber deployment extension, harness stretch, and worker height. Inspect the lanyard and energy absorber before each use for webbing wear, fraying, stitching damage, chemical exposure, hardware defects, and energy absorber deployment indicators. Remove from service immediately if the energy absorber has been deployed or if any defects are identified.

Material: Webbing construction (verify specific material with Peakworks product documentation) Integrated energy absorber pack Steel or alloy snap hooks or carabiners (verify connector type and material with Peakworks product documentation)

Compatible With: Compatible Peakworks full-body harnesses with appropriate harness lanyard attachment points Fall arrest anchor points rated for applicable loads

Uses: Harness-integrated fall arrest lanyard for personal fall arrest systems Construction, industrial maintenance, and general work-at-height applications Applications requiring energy absorption to limit arrest forces Suitable for workers within the 110 to 220 lb capacity range

Key Features: Capacity range: 110 to 220 lb Integrated energy absorber to limit maximum arrest force during fall arrest Harness attachment configuration for streamlined fall arrest connection Compatible with Peakworks full-body harnesses with appropriate attachment points

Note: Always confirm the worker's total weight including tools and equipment falls within the 110 to 220 lb rated capacity range before use. Confirm sufficient fall clearance below the work position before use, accounting for lanyard length, energy absorber deployment extension, harness stretch, and worker height. A deployed energy absorber indicates the lanyard has arrested a fall — remove from service immediately and do not reuse. Inspect before every use and retire from service if any damage or defect is detected.