HARNESS SAF 2XL STAB LOCK STAB LOCK

Description du produit

The Peakworks Safety Harness is a 2XL full-body harness featuring stab-lock buckle leg straps, designed to provide secure, reliable fit and fall arrest performance for larger workers requiring 2XL sizing in construction, industrial maintenance, and general work-at-height applications. Stab-lock buckles on the leg straps provide a fast, positive-latch connection that engages by pressing the buckle tongue directly into the receiver, allowing quick and reliable leg strap closure without the threading step required by pass-thru buckles while still providing a secure latch that resists accidental disengagement during work at height. The 2XL sizing accommodates larger workers who require a harness beyond standard XL sizing, ensuring the harness can be correctly fitted and adjusted to the worker's body dimensions without excessive strap extension or improper fit at critical contact points.

Proper harness fit is essential to fall arrest performance for all workers, and is especially important for larger workers in 2XL sizing where correct adjustment at all strap connection points ensures the harness distributes fall arrest forces correctly across the body. Straps must be adjusted so the harness fits snugly against the body without restricting movement or circulation, with the dorsal D-ring centered between the shoulder blades, the chest strap positioned at mid-sternum level, and the leg straps fitting snugly around the upper thighs with the stab-lock buckles fully engaged and verified before work begins. The 2XL sizing must be verified to fit the specific worker correctly before each use, as harness sizing ranges vary by manufacturer and model.

This harness must be used as part of a complete personal fall arrest system with a compatible shock-absorbing lanyard, self-retracting lifeline, or other connecting subsystem, and a suitable anchor point rated for fall arrest loads. Inspect the harness before each use for webbing wear, fraying, cuts, chemical damage, discoloration, buckle and hardware defects, and stitching integrity. Remove from service immediately if any defects are identified or if the harness has been subjected to fall arrest forces. Always follow the manufacturer's donning, adjustment, and inspection instructions and applicable fall protection regulations.

Material: Webbing construction (verify specific material with Peakworks product documentation) Hardware (verify specific buckle and hardware material with Peakworks product documentation)

Compatible With: Compatible shock-absorbing lanyards, self-retracting lifelines, and rope grab devices for fall arrest Fall arrest anchor points rated for applicable loads

Uses: Full-body harness for personal fall arrest systems requiring 2XL sizing Construction, industrial maintenance, and general work-at-height applications for larger workers Applications where stab-lock leg buckles are preferred for fast, positive-latch leg strap closure Applications requiring 2XL sizing beyond standard XL harness sizing ranges

Key Features: 2XL sizing for larger workers requiring sizing beyond standard XL Stab-lock buckle leg straps for fast, positive-latch leg strap closure without threading Dorsal D-ring fall arrest attachment point

Note: Always verify stab-lock leg buckles are fully engaged and latched before beginning work. Verify the 2XL sizing fits the specific worker correctly before use — harness sizing ranges vary by model and the harness must fit snugly at all contact points without excessive slack. Always inspect and properly adjust the harness before each use, verifying the dorsal D-ring is centered between the shoulder blades and all straps are snug and correctly positioned. A harness that has been subjected to fall arrest forces must be removed from service immediately and must not be reused. Inspect before every use and retire from service if any damage, defect, or fall arrest event is detected.