LIFELINE 200FT POLYSTEEL 6000LB PREM V

Description du produit

The Peakworks Premium Vertical Polysteel Lifeline is a 200 ft lifeline rated to 6000 lb minimum breaking strength, designed for demanding vertical fall protection applications requiring maximum reach and superior rope durability. Polysteel rope construction combines a polyester outer braid with an internal steel wire core, delivering the handling flexibility of a synthetic rope alongside the cut resistance, abrasion resistance, and tensile strength of a steel core. This construction makes it well suited for environments where ropes may contact sharp structural edges, abrasive surfaces, or other hazards that would compromise standard synthetic lifelines over extended lengths.

The 200 ft length provides exceptional vertical reach for the tallest structures encountered in industrial and commercial applications, including communication towers, wind turbines, tall storage tanks, multi-story construction, and offshore and industrial facilities. At this length, proper rope management and deployment are important considerations — the lifeline should be carefully deployed to avoid kinking, tangling, or contact with abrasive surfaces along its full length. The premium designation reflects enhanced construction quality and performance characteristics compared to standard polysteel lifelines, making it appropriate for high-demand professional use where reliability over long rope lengths is critical.

This lifeline is intended for use as part of a complete personal fall arrest system with a compatible full-body harness, a rope grab device rated for polysteel rope and confirmed compatible with the lifeline's diameter, and a suitable anchor point capable of supporting fall arrest loads. The lifeline must be anchored above the work area and the rope grab positioned correctly on the line before work begins. Inspect the full 200 ft length of the rope before each use for fraying, kinking, core wire protrusion, chemical damage, or any other deterioration, and remove from service immediately if any defects are found.

Material: Polysteel rope (polyester outer braid with steel wire core)

Compatible With: Rope grab devices rated and compatible with polysteel lifeline rope diameter Full-body harnesses with dorsal D-ring fall arrest attachment Fall arrest anchor points rated for applicable loads

Uses: Vertical lifeline for personal fall arrest systems requiring maximum reach Communication tower and wind turbine climbing Tall storage tank and multi-story construction applications Offshore and industrial facility work at height requiring extended lifeline length

Key Features: 6000 lb minimum breaking strength 200 ft length for maximum vertical reach Polysteel construction: polyester outer braid with steel wire core Enhanced cut and abrasion resistance versus synthetic-only rope Premium construction for high-demand professional fall protection applications

Note: Always verify rope grab compatibility with polysteel lifeline diameter and construction before use. Carefully deploy and manage the full 200 ft length to avoid kinking, tangling, or abrasive surface contact. Anchor above the work area to a suitable fall arrest anchor point. Inspect the full rope length before every use and retire from service upon detection of any damage or defect.